Abstract:The red and green colored porcelain is an important overglaze colored porcelain in the history of Chinese ceramics. It is significant to analyze the chemical composition and phase structure of the colored pigments to study the process of fired technologies. However, the traditional X-ray diffractometer with a 1 mm X 10 mm line source is not easy to measure the porcelain sample of uneven surface and unevenly distributed color material. The capillary-focused X-ray diffractometer has a point X-ray beam to irradiate the sample. The capillary X-ray lens has a magnification of up to 3 orders of magnitude to the energy of Cu-K alpha and has a low divergence of the X-ray beam. Therefore, it can measure the sample with a diameter of 100 micrometers and the conventional X-ray diffraction analysis of a sample with diameter of 3 mm, which is very suitable for the non-destructive analysis of the mineral structure of ancient ceramic samples. This article reports the results of the chemical composition and phase structure of the white glaze and red and green-colored pigments in the Qing Dynasty unearthed in Jingdezhen, Jiangxi province by the capillary focused microbeam X-ray fluorescence spectrometer, and the capillary focused X-ray diffraction spectrometer developed by our laboratory. It carried out the two-dimensional scanning analysis of the distribution of multi-element and mineral phases in the interest region (2 mm X2 mm) of the red and green colored porcelain. The results show that at first, Cu is the main coloring element of green colored pigments and the concentration of Cu in green colored pigments is 0. 02%. Moreover, parts of Cu exist in the form of the Pb8Cu(Si-2<b>O-7)(3) crystal phase. Secondly, Fe is the main coloring element of red-colored pigments, and the contractions of Fe in red-colored pigments is 1. 63% , and parts of Fe exist in the form of the Fe2O3 crystal phase; Thirdly, the concentrations of Pb in green and red-colored pigments is 41. 49% and 6. 29% , respectively. The main function of Pb is to lower the melting point of the colored pigments, and parts of the Pb combined with Cu and Si during the firing process at 700 similar to 800 degrees C to exist in the form of Pb8Cu(Si2O7)(3) crystal phase. From the element 2D mapping and crystal phase mapping, it is obvious that the crystal phase of the coloring elements Cu and Fe in the colored pigments is inconsistent with the element distribution of Cu and Fe. It indicates that the Cu and Fe mineral crystal phases in the raw materials may disappear during the firing process, and the Fe2O3 crystal phases have been left or generated during the process of firing or cooling. The mullite crystal phase in the white glaze indicates that the white glaze fired at a high temperature. However, the formation temperature of the Pb3Cu(Si3O7)(3) crystal phase is only about 750 degrees C , which can further explain that the red and green colored pigments were fired at low temperatures. In general, the capillary-focused microbeam X-ray fluorescence spectrometer and the capillary-focused microbeam X-ray diffraction specrometer could have important application prospects in cultural relics' scientific and technological research.

The Destructive/Non-Destructive Identification of Enameled Pottery, Glass Artifacts and Associated Pigments—A Brief Overview

Raman Spectrometry, a Unique Tool to Analyze and Classify Ancient Ceramics and Glasses

Non-Invasive On-Site Raman Study of Pigments and Glassy Matrix of 17th–18th Century Painted Enamelled Chinese Metal Wares: Comparison with French Enamelling Technology

Non‐invasive on‐site Raman study of polychrome and white enamelled glass artefacts in imitation of porcelain assigned to Bernard Perrot and his followers

Non-Invasive Raman Classification Comparison with pXRF of Monochrome and Related Qing Porcelains: Lead-Rich-, Lead-Poor-, and Alkali-Based Glazes

Is Non-destructive Provenancing of Pottery Possible With Just a Few Discriminative Trace Elements?

The Method of Archimedes in the geometry of quadrics

Raman identification of pigments and opacifiers: Interest and limitation of multivariate analysis by comparison with solid state spectroscopical approach—I. Lead‐tin and Naples Yellow

High-performance liquid chromatography and non-destructive three-dimensional fluorescence analysis of early synthetic dyes

Non-Invasive On-Site XRF and Raman Classification and Dating of Ancient Ceramics: Application to 18th and 19th Century Meissen Porcelain (Saxony) and Comparison with Chinese Porcelain

Microanalysis of organic pigments and glazes in polychrome works of art by surface-enhanced resonance Raman scattering

Raman identification of pigments and opacifiers: Interest and limitation of multivariate analysis by comparison with solid state spectroscopical approach—II. Arsenic‐based opacifiers and relation with cobalt ores

Polymerisation Degree and Raman Identification of Ancient Glasses used for Jewellery, Ceramics Enamels and Mosaics

Nondestructive Analysis and Identification of Pigments on Colored Relics by Fiber Optic Reflectance Spectroscopy

Look but don't touch: Non-invasive chemical analysis of organic paint binders – A review

Methodological Study of Non-destructive Analysis of Ancient Pb-rich Glaze of Porcelain by Micro-X-ray Fluorescence

Tin-based opacifiers in archaeological glass and ceramic glazes: a review and new perspectives

Time-Resolved Photoluminescence Microscopy Combined with X-ray Analyses and Raman Spectroscopy Sheds Light on the Imperfect Synthesis of Historical Cadmium Pigments

A non-destructive spectroscopic study of the decoration of archaeological pottery: from matt-painted bichrome ceramic sherds (southern Italy, VIII-VII B.C.) to an intact Etruscan cinerary urn

Elemental Analysis-Aided Raman Spectroscopic Studies on Chinese Cloisonné Wares and Painted Enamels from the Imperial Palace.

Non-Destructive Analysis of Red and Green Porcelain in Qing Dynasty