Extended radical resection for bulky N2 small cell lung carcinoma.

A. Yamanaka,T. Hirai,T. Fujimoto,Y. Ohtake,N. Isowa

DOI: https://doi.org/10.1007/BF03217938

The Japanese Journal of Thoracic and Cardiovascular Surgery

Abstract:

What problem does this paper attempt to address?

Structural characterization of nanoparticles from thermoresponsive poly(N-isopropylacrylamide)-DNA conjugate.

Wei-Yang Ooi,Masahiro Fujita,Pengju Pan,Hui-Ying Tang,Kumar Sudesh,Kazuki Ito,Naoki Kanayama,Tohru Takarada,Mizuo Maeda

DOI: https://doi.org/10.1016/j.jcis.2012.02.012

IF: 9.9

2012-01-01

Journal of Colloid and Interface Science

Abstract:Poly(N-isopropylacrylamide) (PNIPAAm) grafted with single-stranded (ss) DNA conjugate (PNIPAAm-g-DNA) self-assembles above its lower critical solution temperature to form colloidal particles. When the ssDNA within the particle hybridizes with its complementary DNA, the particles aggregate above a certain threshold of salt concentration with drastically increased turbidity in solution. Detailed structural information of the particle was obtained mainly by small-angle X-ray scattering. The influence of copolymer composition on the morphology of particle and non-crosslinking aggregation was examined. The particle consists of hydrophobic PNIPAAm core surrounded by hydrophilic DNA strands. The increase in DNA fraction brought about a significant decrease in core size, whereas the shell thickness little changed and corresponded to the length of DNA. A structural model with a sticky potential was applied to the analysis of particle aggregate. This analysis provided that the particles aggregate while the coronal layers interpenetrate each other. The interaction between the particles was quantified in terms of the sticky potential and showed a trend to be influenced by the particle size rather than the graft density of DNA strands on the particle.
Controlled self-assembly of multiferroic core-shell nanoparticles exhibiting strong magneto-electric effects

Gollapudi Sreenivasulu,Maksym Popov,Ferman A. Chavez,Sean L. Hamilton,Piper R. Lehto,Gopalan Srinivasan

DOI: https://doi.org/10.1063/1.4863690

IF: 4

2014-02-03

Applied Physics Letters

Abstract:Ferromagnetic-ferroelectric composites show strain mediated coupling between the magnetic and electric sub-systems due to magnetostriction and piezoelectric effects associated with the ferroic phases. We have synthesized core-shell multiferroic nano-composites by functionalizing 10–100 nm barium titanate and nickel ferrite nanoparticles with complementary coupling groups and allowing them to self-assemble in the presence of a catalyst. The core-shell structure was confirmed by electron microscopy and magnetic force microscopy. Evidence for strong strain mediated magneto-electric coupling was obtained by static magnetic field induced variations in the permittivity over 16–18 GHz and polarization and by electric field induced by low-frequency ac magnetic fields.

physics, applied
Multiferroic Core-Shell Nanofibers, Assembly in a Magnetic field and Studies on MagnetoElectric Interactions

G. Sreenivasulu,Jitao Zhang,Ru Zhang,M. Popov,V. M. Petrov,G. Srinivasan

DOI: https://doi.org/10.3390/ma11010018

2017-08-17

Abstract:Ferromagnetic-ferroelectric nanocomposites are of interest for realizing strong strain mediated coupling between electric and magnetic subsystems due to high surface area-to-volume ratio. This report is on the synthesis of nickel ferrite (NFO) -barium titanate (BTO) core-shell nano-fibers, magnetic field assisted assembly into superstructures, and studies on magneto-electric (ME) interactions. Electrospinning techniques were used to prepare coaxial fibers of 0.5-1.5 micron in diameter. The core-shell structure of annealed fibers was confirmed by electron microscopy and scanning probe microscopy. The fibers were assembled into discs and films in a uniform magnetic field or a field gradient. Studies on ME coupling in the assembled films and discs were done by magnetic field H induced polarization, magneto-dielectric effects at low frequencies and at 16-24 GHz, and low frequency ME voltage coefficients (MEVC). We measured 2~ 2-7% change in remnant polarization and in the permittivity for H = 7 kOe, and a MEVC of 0.4 mV/cm Oe at 30 Hz. A model has been developed for low-frequency ME effects in an assembly of fibers and takes into account dipole-dipole interactions between the fibers and fiber discontinuity. Theoretical estimates for the low-frequency MEVC have been compared with the data. These results indicate strong ME coupling in superstructures of the core-shell fibers.

Materials Science
Evaluating the SF-36 Health Survey (Version 2) in Older Vietnamese Americans

Q. Ngo-Metzger,Dara H. Sorkin,C. Mangione,B. Gandek,R. Hays

DOI: https://doi.org/10.1177/0898264308315855

2008-06-01

Journal of Aging and Health

Abstract:Objectives: The SF-36® Health Survey (Version 2; SF-36) was evaluated among older Vietnamese Americans to determine whether underlying dimensions of physical and mental health were similar to those of other groups in the United States. Method: Field testing of participants from senior centers. Results: The study provided support for the reliability and validity of the SF-36. Structural equation modeling provided confirmation of physical and mental health factors. However, the factor loadings for the SF-36 scales were more consistent with previous results from Asian countries than the typical pattern observed in the United States. Discussion: As the older populations in the United States become more diverse, it is important to have standardized health-related quality of life measures. However, the conceptualization of physical and mental health and associations among different scales may be different for Asian immigrants than for other groups. Thus, the interpretation of the SF-36 scores needs to account for cultural differences.
Three-Dimensional Self-Assembly of Core/Shell-Like Nanostructures for High-Performance Nanocomposite Permanent Magnets.

Hailing Li,Xiaohong Li,Xiangyi Zhang,Li Lou,Wei Li,D. Guo

DOI: https://doi.org/10.1021/acs.nanolett.6b02210

2016-08-31

Abstract:Core/shell nanostructures are fascinating for many advanced applications including strong permanent magnets, magnetic recording, and biotechnology. They are generally achieved via chemical approaches, but these techniques limit them to nanoparticles. Here, we describe a three-dimensional (3D) self-assembly of core/shell-like nanocomposite magnets, with hard-magnetic Nd2Fe14B core of ∼45 nm and soft-magnetic α-Fe shell of ∼13 nm, through a physical route. The resulting Nd2Fe14B/α-Fe core/shell-like nanostructure allows both large remanent magnetization and high coercivity, leading to a record-high energy product of 25 MGOe which reaches the theoretical limit for isotropic Nd2Fe14B/α-Fe nanocomposite magnets. Our approach is based on a sequential growth of the core and shell nanocrystals in an alloy melt. These results make an important step toward fabricating core/shell-like nanostructure in 3D materials.

Physics,Engineering,Medicine,Materials Science
From tunable DNA/polymer self-assembly to tailorable and morphologically pure core-shell nanofibers.

Weichong Wang,Kaka Zhang,Daoyong Chen

DOI: https://doi.org/10.1021/acs.langmuir.8b02992

IF: 3.9

2018-01-01

Langmuir

Abstract:In reported experimental studies, DNA/polymer self-assemblies are usually kinetically trapped, leading to the encapsulation and irregular collapse of DNA chains within the resultant assemblies. In striking contrast, eukaryotic cells use tetrasome-to-nucleosome pathways to escape possible kinetic trapping for the formation of well-defined 10 nm chromatin fibers. Here, we report a novel pathway for DNA and amphiphilic diblock copolymer self-assembly inspired by the tetrasome pathway with highly controllable kinetics. The polymer is an A-b-B diblock copolymer with a hydrophilic and noninteractive block A and a hydrophobic and interactive block B. Below the critical water content for the micellization, B blocks wrap the backbone of a DNA chain by weak electrostatic interactions to form a linear DNA/polymer complex. With a gradual increase in the water content, the diblock copolymer unimers in the bulk solution tend to aggregate on the linear DNA/polymer complex, which induces the originally wrapped DNA chain, to change its conformation to wrap around the polymer aggregate, guiding and tailoring the self-assembly. Highly controllable kinetics is achieved via the reduced DNA/polymer electrostatic interactions and the high dynamics of the polymer chains in the system. DNA/polymer self-assembly leads to tailorable and morphologically pure core-shell nanofibers. Compared to the DNA/micelle self-assembly pathway described in our previous study, the present self-assembly pathway exhibits advantages for the fabrication of flexible nanofibers with lengths in micrometers and the potential for unique applications in preparing not only 2D networks at extremely low percolation thresholds but also chemiresistors with large on/off current ratios.
Hard–Soft Core–Shell Architecture Formation from Cubic Cobalt Ferrite Nanoparticles

Marco Sanna Angotzi,Valentina Mameli,Dominika Zákutná,Fausto Secci,Huolin L. Xin,Carla Cannas

DOI: https://doi.org/10.3390/nano13101679

IF: 5.3

2023-05-19

Nanomaterials

Abstract:Cubic bi-magnetic hard–soft core–shell nanoarchitectures were prepared starting from cobalt ferrite nanoparticles, prevalently with cubic shape, as seeds to grow a manganese ferrite shell. The combined use of direct (nanoscale chemical mapping via STEM-EDX) and indirect (DC magnetometry) tools was adopted to verify the formation of the heterostructures at the nanoscale and bulk level, respectively. The results showed the obtainment of core–shell NPs (CoFe2O4@MnFe2O4) with a thin shell (heterogenous nucleation). In addition, manganese ferrite was found to homogeneously nucleate to form a secondary nanoparticle population (homogenous nucleation). This study shed light on the competitive formation mechanism of homogenous and heterogenous nucleation, suggesting the existence of a critical size, beyond which, phase separation occurs and seeds are no longer available in the reaction medium for heterogenous nucleation. These findings may allow one to tailor the synthesis process in order to achieve better control of the materials’ features affecting the magnetic behaviour, and consequently, the performances as heat mediators or components for data storage devices.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Engineering Multifunctional DNA Hybrid Nanospheres Through Coordination‐Driven Self‐Assembly

Mengyuan Li,Congli Wang,Zhenghan Di,Hui Li,Jingfang Zhang,Wenting Xue,Meiping Zhao,Ke Zhang,Yuliang Zhao,Lele Li

DOI: https://doi.org/10.1002/anie.201810735

2018-01-01

Angewandte Chemie

Abstract:AbstractDeveloping simple and general approaches for the synthesis of nanometer‐sized DNA materials with specific morphologies and functionalities is important for various applications. Herein, a novel approach for the synthesis of a new set of DNA‐based nanoarchitectures through coordination‐driven self‐assembly of FeII ions and DNA molecules is reported. By fine‐tuning the assembly, Fe–DNA nanospheres of precise sizes and controlled compositions can be produced. The hybrid nanoparticles can be tailored for delivery of functional DNA to cells in vitro and in vivo with enhanced biological function. This highlights the potential of metal ion coordination as a tool for directing the assembly of DNA architectures, which conceptualizes a new pathway to expand the repertoire of DNA‐based nanomaterials. This methodology will advance both the fields of DNA nanobiotechnology and metal–ligand coordination chemistry.
DNA Hierarchical Superstructures from Micellar Units: Stiff Hydrogels and Anisotropic Nanofibers

Michael D Dore,Quentin Laurent,Christophe Lachance-Brais,Trishalina Das,Xin Luo,Hanadi F Sleiman

DOI: https://doi.org/10.1002/chem.202401453

2024-09-19

Chemistry

Abstract:Supramolecular materials have been assembled using a wide range of interactions, including the hydrophobic effect, DNA base-pairing, and hydrogen bonding. Specifically, DNA amphiphiles with a hydrophobic building block self-assemble into diverse morphologies depending on the length and composition of both blocks. Herein, we take advantage of the orthogonality of different supramolecular interactions - the hydrophobic effect, Watson-Crick-Franklin base pairing and RNA kissing loops - to create hierarchical self-assemblies with controlled morphologies on both the nanometer and the micrometer scales. Assembly through base-pairing leads to the formation of hybrid, multi-phasic hydrogels with high stiffness and self-healing properties. Assembly via hydrophobic core interactions gives anisotropic, discrete assemblies, where DNA fibers with one sequence are terminated with DNA spheres bearing different sequences. This work opens new avenues for the bottom-up construction of DNA-based materials, with promising applications in drug delivery, tissue engineering, and the creation of complex DNA structures from a minimum array of components.
Lead-Free BNT–BT0.08/CoFe2O4 Core–Shell Nanostructures with Potential Multifunctional Applications

Marin Cernea,Roxana Radu,Harvey Amorín,Simona Gabriela Greculeasa,Bogdan Stefan Vasile,Vasile Adrian Surdu,Paul Ganea,Roxana Trusca,Marwa Hattab,Carmen Galassi

DOI: https://doi.org/10.3390/nano10040672

IF: 5.3

2020-04-03

Nanomaterials

Abstract:Herein we report on novel multiferroic core–shell nanostructures of cobalt ferrite (CoFe2O4)–bismuth, sodium titanate doped with barium titanate (BNT–BT0.08), prepared by a two–step wet chemical procedure, using the sol–gel technique. The fraction of CoFe2O4 was varied from 1:0.5 to 1:1.5 = BNT–BT0.08/CoFe2O4 (molar ratio). X–ray diffraction confirmed the presence of both the spinel CoFe2O4 and the perovskite Bi0.5Na0.5TiO3 phases. Scanning electron microscopy analysis indicated that the diameter of the core–shell nanoparticles was between 15 and 40 nm. Transmission electron microscopy data showed two–phase composite nanostructures consisting of a BNT–BT0.08 core surrounded by a CoFe2O4 shell with an average thickness of 4–7 nm. Cole-Cole plots reveal the presence of grains and grain boundary effects in the BNT–BT0.08/CoFe2O4 composite. Moreover, the values of the dc conductivity were found to increase with the amount of CoFe2O4 semiconductive phase. Both X-ray photoelectron spectroscopy (XPS) and Mössbauer measurements have shown no change in the valence of the Fe3+, Co2+, Bi3+ and Ti4+ cations. This study provides a detailed insight into the magnetoelectric coupling of the multiferroic BNT–BT0.08/CoFe2O4 core–shell composite potentially suitable for magnetoelectric applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Scanning probe microscopy study of cobalt ferrite-barium titanate coreshell magnetoelectric nanoparticles

Ping Wang,Dennis Toledo,Elric Zhang,Mackenson Telusma,Dwayne McDaniel,Ping Liang,Sakhrat Khizroev

DOI: https://doi.org/10.1016/j.jmmm.2020.167329

IF: 3.097

2020-12-01

Journal of Magnetism and Magnetic Materials

Abstract:Cobalt ferrite – barium titanate coreshell composite nanoparticles are an important part of the emerging field of magnetoelectric materials. Understanding the structure of these nanoparticles is vital towards controlling and adjusting their key properties for specific applications. Although transmission electron microscopy can reveal nanoparticle size, shape, and crystallinity, key information regarding the magnetic properties and the compositional makeup of the coreshell configuration remains elusive at nanoscale. This paper covers the use of scanning probe microscopy to directly measure these features using topography imaging, magnetic force imaging, and phase imaging. This technique provides significant insights into the intrinsic magnetoelectric coupling between the magnetostrictive cobalt ferrite core and the piezoelectric barium titanate shell. Particularly, this technique was applied to obtain phase images that directly exhibited the coreshell configuration, including an intermediate transition region between the core and the shell. The samples examined include 20 nm and 50 nm cobalt ferrite-barium titanate coreshell nanoparticles fabricated via co-precipitation and sol–gel synthesis. The results revealed a cuboid shape for the cobalt ferrite cores, and an oval shape for the cobalt ferrite-barium titanate coreshell nanoparticles. This result was confirmed by transmission electron microscopy. Additionally, the paper comprehensively analyzes the samples in their powder form via X-ray diffraction. The results indicate that the crystallinity of barium titanate is enhanced as the cobalt ferrite concentration is increased because of heterogeneous nucleation requiring a lower nucleation barrier compared to homogeneous nucleation.

materials science, multidisciplinary,physics, condensed matter
Colloidal crystal engineering with metal–organic framework nanoparticles and DNA

Shunzhi Wang,Sarah S. Park,Cassandra T. Buru,Haixin Lin,Peng-Cheng Chen,Eric W. Roth,Omar K. Farha,Chad A. Mirkin

DOI: https://doi.org/10.1038/s41467-020-16339-w

IF: 16.6

2020-05-19

Nature Communications

Abstract:Abstract Colloidal crystal engineering with nucleic acid-modified nanoparticles is a powerful way for preparing 3D superlattices, which may be useful in many areas, including catalysis, sensing, and photonics. To date, the building blocks studied have been primarily based upon metals, metal oxides, chalcogenide semiconductors, and proteins. Here, we show that metal–organic framework nanoparticles (MOF NPs) densely functionalized with oligonucleotides can be programmed to crystallize into a diverse set of superlattices with well-defined crystal symmetries and compositions. Electron microscopy and small-angle X-ray scattering characterization confirm the formation of single-component MOF superlattices, binary MOF–Au single crystals, and two-dimensional MOF nanorod assemblies. Importantly, DNA-modified porphyrinic MOF nanorods (PCN-222) were assembled into 2D superlattices and found to be catalytically active for the photooxidation of 2-chloroethyl ethyl sulfide (CEES, a chemical warfare simulant of mustard gas). Taken together, these new materials and methods provide access to colloidal crystals that incorporate particles with the well-established designer properties of MOFs and, therefore, increase the scope of possibilities for colloidal crystal engineering with DNA.

multidisciplinary sciences
High Frequency Soft Magnetic Nanoparticles with Core/Shell Structures

Zhong Wei,Tang Nujiang,Jin Changqing,Du Youwei

DOI: https://doi.org/10.3969/j.issn.1671-4776.2008.07.001

2008-01-01

Abstract:Magnetic nanoparticles with core/shell structures are an important class of functional materials,possessing unique magnetic properties due to their tailored dimensions and compositions.Mainly our recent advances in the preparation and characterizations of high frequency soft magnetic materials with core/shell structures are reviewed.In these magnetic systems we investigated,the magnetic core(Fe,Co,Ni and their alloys)was coated with a layer of i)insulator(such as SiO2,Al2O3,C-SiO2,etc),ii)semiconductor(ZnO2),and iii)helical carbon nanotubes.In the first part of our investigations,the experimental results indicate that the insulator-coated metal nanocomposites are very stable against oxidization in air.The complex permeability study of these materials shows that insulator shell could improve the soft magnetic property,especially in the high-frequency range.In second part,core/shell Fe/ZnO nanocomposite with average diameter of 200 nm has been synthesized successfully by means of a combined sol-gel/reduction method.The saturation magnetization of the Fe/ZnO samples is relatively high due to the core α-Fe particles.The photoluminescence spectrum recorded at room temperature display ultraviolet band at 390 nm as well as three broader bands at 522,635,and 700 nm in the region of green to infrared.Such phenomena differ from those reported in previous publications.In the last part,it's illustrated how the yield and magnetic properties of double helical carbon nanotubes(HCNTs)generated by the pyrolysis of acetylene over Fe nanoparticles can be manipulated.The HCNTs may be useful as lightweight materials for microwave absorption.
Erratum: Strain-mediated Magneto-Electric Interactions in Hexagonal Ferrite and Ferroelectric Coaxial Nanofibers–corrigendum

Xiong Y.

DOI: https://doi.org/10.1557/mrc.2020.47

2023-01-01

Ferroelectrics

Abstract:In regards to the list of authors on this article[1], the names should appear as follows: Y. Liu, P. Zhou, J. Fu, M. Iyengar, N. Liu, P. Du, Y. Xiong, V. Moiseienko, W. Zhang, J. Zhang, Z. Ma, Y. Qi, V. Novosad, T. Zhou, D. Filippov, T. Zhang, M. R. Page and G. Srinivasan
Shear disassembly of hierarchical superparamagnetic Fe3O4 hollow nanoparticle necklace chains

shouhu xuan,lingyun hao,ken chamfai leung

DOI: https://doi.org/10.1039/c4nj01005a

IF: 3.3

2014-01-01

New Journal of Chemistry

Abstract:Supramolecular amide hydrogen-bond interactions between bundles of necklace-like chains based on superparamagnetic hollow Fe3O4 nanoparticle beads could be indirectly quantified by shear stress and magnetorheological analyses. First, a facile magnetic field-induced method was developed for the preparation of the superparamagnetic Fe3O4 hierarchical chain structures. Primary Fe3O4 hollow nanospheres, hollow nanosphere-assembled chains, and partially hollow nanosphere-assembled chains were successfully prepared. These superparamagnetic nanoparticles and chains could be well dispersed in aqueous solutions. The magnetic hollow nanoparticle chains possess a strong magnetorheological effect in aqueous solutions. Bundle wire-like structures based on chains or nanospheres could be formed with different magnetic field alignments. The hollow nanostructure greatly strengthens the as-formed bundle wire-like structures such that the chains have a larger magnetorheological effect than that of the hollow nanospheres. It is envisaged that a specific cell transfection mechanism of chains and wires could involve a partial disassembly from bundles to individual chains/wires before endocytosis. The force that is exerted on this disassembly from bundles to individual chains/wires in a specific medium, which are quantified by shear stress and magnetorheological analyses, would shed light on cell magnetofection mechanisms.
Path-Dependent Anisotropic Colloidal Assembly of Magnetic Nanocomposite–Protein Complexes

Yanbai Pei,Shengming Wu,Peng Wang,Jingwen Qin,Lehua Xu,Yilong Wang

DOI: https://doi.org/10.1021/acs.langmuir.1c02923

IF: 3.9

2022-05-12

Langmuir

Abstract:Anisotropic self-assembly of nanoparticles (NPs) stems from the fine-tuning of their surface functionality and NP interaction. Strategies involving ligand interaction, protein interaction, and external stimulus have been developed. However, robust construction of monodispersed magnetic NPs to tens of microns of anisotropically aligned colloidal assembly triggered by adsorbed protein intermolecular interaction is yet to be elucidated. Here, we present the NP-protein interaction, magnetic force, and protein corona intermolecular interaction serially but independently induced path-dependent self-assembly of 100 nm Fe3O4@SiO2 nanocomposites. Dynamic formation of the micron-sized anisotropic magnetic assembly was reproducibly realized in a continuous medium in a controllable manner. Formation of the primary globular clusters upon the unique NP-protein complexes with the help of ions acts as the prerequisite for the anisotropic colloidal assembly, followed by the magnetic force-driven pre-organization and protein intermolecular electrostatic interaction-mediated elongation. The protein concentration rather than the protein original structure plays a more pivotal role in the NP-protein interaction and subsequent colloidal assembly process. Two typical serum proteins fibrinogen and bovine serum albumin enable formation of the anisotropic colloidal assembly but with a different subtle morphology. Furthermore, the obtained micron-sized magnetic colloidal assembly can be dissociated rapidly by adding a negative electrolyte in the medium due to the interference in the NP-protein interaction. However, the self-assembly process can be recycled based on the dissociated colloidal assembly.

chemistry, multidisciplinary, physical,materials science
Stepwise Interfacial Self-Assembly of Nanoparticles Via Specific DNA Pairing

Bo Wang,Miao Wang,Hao Zhang,Nelli S. Sobal,Weijun Tong,Changyou Gao,Yanguang Wang,Michael Giersig,Dayang Wang,Helmuth Moehwald

DOI: https://doi.org/10.1039/b705094a

IF: 3.3

2007-01-01

Physical Chemistry Chemical Physics

Abstract:In the present work, we succeeded in alternatively depositing inorganic nanoparticles and functionalized DNA bases onto the water/oil interface from the water and oil bulk phases. The ligands used were functional thymines and adenines. Their thiol and phosphate groups were used to cap inorganic nanoparticles and their thymine and adenine groups to alter the surface functionality of the nanoparticles, thus enabling a layer-by-layer growth fashion of nanoparticles at the interface. The multiple particle ligation rendered the resulting nanoparticle films rather mechanically robust. As results, the freestanding asymmetric bilayer and trilayer films, composed of negatively-charged Au, positively-charged CdTe, and/or organic Ag nanoparticles were constructed; their areas were as large as over several centimetres, depending on the sizes of the containers used. Our work should bring up a novel methodology to generate asymmetric multilayer films of nanoparticles with a defined control of electron or charge across the films.
Dipolar Chains and 2D Aligned Stripes of Polymer‐coated Magnetic Iron Colloid

Lifeng Yan,Sui Shen,Wan Li,Xiaoping Wang

DOI: https://doi.org/10.1002/app.24186

IF: 3

2006-01-01

Journal of Applied Polymer Science

Abstract:Studies on the self-assembly of core-shell magnetic nanospheres under or without an external magnetic field are the subject of intense research. It is believed that after being coated by organic molecules, the magnetic nanoparticles can still have chance to form chain-like structure driven by the dipole-dipole interactions while the coated shell minimizes the effect of Van der Waals attractions. However, still there are no direct experimental observations for polymer-modified magnetic colloids sized hundreds of nanometers. In this article, PEG- and PSt-coated Fe2O3 nanospheres were synthesized and their self-assembly behaviors were studied. MFM and TEM measurements reveal that the prepared spheres owning a core-shell structure. Under zero magnetic field, a direct observation of chain-like structure was achieved for the PEG-coated magnetic colloids. For the PSt-modified magnetic spheres, there formed a 2D aligned stripes pattern at the surface of mica when the suspending of sample was dried under an external magnetic field. (c) 2006 Wiley Periodicals, Inc.
Self-assembly of DNA Nanostructures via Bioinspired Metal Ion Coordination

Congli Wang,Zhenghan Di,Zetan Fan,Lele Li

DOI: https://doi.org/10.1007/s40242-019-0028-z

IF: 3.1

2019-12-21

Chemical Research in Chinese Universities

Abstract:Despite a growing interest in DNA nanomaterials, their simple synthesis remains a challenge. A simple and general strategy for constructing DNA-based nanomaterials by metal ion coordination is reported. The metal-DNA nanoparticles(NPs) could be synthesized with DNA molecules of diverse sequence and various metal ions of intrinsic property, resulting in multifunctional NPs with the combined advantages of both inorganic and DNA building blocks. It is demonstrated that the hybrid metal-DNA NPs could be engineered for magnetic resonance and luminescence imaging, encapsulation of multifarious nucleic acids with controlled ratio, and co-assembly with small drug molecules. Furthermore, because these metal-DNA NPs exhibited enhanced cellular uptake compared to free synthetic DNA, they hold potential for applications in diagnostics and therapeutics.

chemistry, multidisciplinary
Self-assembly of DNA-functionalized colloids

Panagiotis E. Theodorakis,Nikolaos G. Fytas,Gerhard Kahl,Christoph Dellago

DOI: https://doi.org/10.5488/CMP.18.22801

2015-06-16

Abstract:Colloidal particles grafted with single-stranded DNA (ssDNA) chains can self-assemble into a number of different crystalline structures, where hybridization of the ssDNA chains creates links between colloids stabilizing their structure. Depending on the geometry and the size of the particles, the grafting density of the ssDNA chains, and the length and choice of DNA sequences, a number of different crystalline structures can be fabricated. However, understanding how these factors contribute synergistically to the self-assembly process of DNA-functionalized nano- or micro-sized particles remains an intensive field of research. Moreover, the fabrication of long-range structures due to kinetic bottlenecks in the self-assembly are additional challenges. Here, we discuss the most recent advances from theory and experiment with particular focus put on recent simulation studies.

Soft Condensed Matter

Extended radical resection for bulky N2 small cell lung carcinoma.

Structural characterization of nanoparticles from thermoresponsive poly(N-isopropylacrylamide)-DNA conjugate.

Controlled self-assembly of multiferroic core-shell nanoparticles exhibiting strong magneto-electric effects

Multiferroic Core-Shell Nanofibers, Assembly in a Magnetic field and Studies on MagnetoElectric Interactions

Evaluating the SF-36 Health Survey (Version 2) in Older Vietnamese Americans

Three-Dimensional Self-Assembly of Core/Shell-Like Nanostructures for High-Performance Nanocomposite Permanent Magnets.

From tunable DNA/polymer self-assembly to tailorable and morphologically pure core-shell nanofibers.

Hard–Soft Core–Shell Architecture Formation from Cubic Cobalt Ferrite Nanoparticles

Engineering Multifunctional DNA Hybrid Nanospheres Through Coordination‐Driven Self‐Assembly

DNA Hierarchical Superstructures from Micellar Units: Stiff Hydrogels and Anisotropic Nanofibers

Lead-Free BNT–BT0.08/CoFe2O4 Core–Shell Nanostructures with Potential Multifunctional Applications

Scanning probe microscopy study of cobalt ferrite-barium titanate coreshell magnetoelectric nanoparticles

Colloidal crystal engineering with metal–organic framework nanoparticles and DNA

High Frequency Soft Magnetic Nanoparticles with Core/Shell Structures

Erratum: Strain-mediated Magneto-Electric Interactions in Hexagonal Ferrite and Ferroelectric Coaxial Nanofibers–corrigendum

Shear disassembly of hierarchical superparamagnetic Fe3O4 hollow nanoparticle necklace chains

Path-Dependent Anisotropic Colloidal Assembly of Magnetic Nanocomposite–Protein Complexes

Stepwise Interfacial Self-Assembly of Nanoparticles Via Specific DNA Pairing

Dipolar Chains and 2D Aligned Stripes of Polymer‐coated Magnetic Iron Colloid

Self-assembly of DNA Nanostructures via Bioinspired Metal Ion Coordination

Self-assembly of DNA-functionalized colloids