Abstract:Cracks are Janus-faced, which cause material failure on one hand and serve as a powerful approach for material processing on the other. To predict cracks and control them in a desired manner, foundational fracture mechanisms are continuously being pursued, based on simplified modes of planar cracks. In reality, cracks usually occur in a three-dimensional (3D) irregular manner. Prediction of 3D fractures is of particular significance for understanding the fundamental fracture mechanisms. However, controlling cracks in typical 3D modes is rare. Here we report that controllable 3D helical cracks on heterogeneous spindle knots are induced by biaxial thermal stresses. The thermal expansion mismatch between the tough core and brittle shell during the heating process generates biaxial stresses in the axial and circumferential directions. Surface cleavage and interface delamination driven by the release rate of elastic strain energy are harmonized due to the unique spindle geometry and cooperate to produce a 3D helical crack. This finding is helpful for understanding complex cracking mechanisms and provides a promising prospect for controlling or eliminating 3D cracks. Materials are prone to crack under stress — this can either cause materials failure or, when deliberately induced, offer a useful manufacturing step. In both situations, knowing how to control and predict how materials crack will help in their design and synthesis. Yet exerting control is difficult — for example, we have all seen pottery cracked along random directions. Yong Zhao and co-workers have now prepared core–shell fibres that undergo helical cracking at specific positions. A tough glass fibre was dip-coated with a brittle metal oxide film featuring regular spindle knots. On calcination, the thermal expansion undergone by the tough core does not match that of the brittle shell, creating longitudinal and circumferential stresses. The stress lines in turn cause the knots to crack into helical coils, whose shapes depend on the initial formation process. These findings represent a step forward along the way of controllable fracture. Regular microhelics on a heterogenous spindle knot are obtained by controlled biaxial stresses in three dimensions. The spindle knot has a tough core and a brittle shell, resulting in biaxial stresses that arise from a thermal expansion mismatch during a heating process. Surface cleavage and interface delamination are harmonized due to the special spindle geometry and cooperate to 3D helical crack. This study not only widens our understanding of the cracking phenomena, but also sheds light on the control and design of regular cracks in arbitrary dimensions. It holds promise for applications in eliminating or controlling cracks for manufacturing process, especially at micro/nanosales, which domains are difficult to be generated by routine methods.

Controlled Crack Propagation of Flexible Film/Substrate Assembly by Biaxial Stress

Study on the Crack Propagation of Stiff-Thin-Film-on-Soft-Substrate Structures under Biaxial Loading

Biaxial Stress Controlled Three-Dimensional Helical Cracks

Study on fracture behavior in stiff-thin-film-on-soft-substrate structures under biaxial stress state

Mechanism for Controlling Buckling Wrinkles by Curved Cracks on Hard-Nano-film/soft-matter-substrate

Peridynamic Fracture Analysis of Film–substrate Systems

Recent progress on crack pattern formation in thin films

Recent Progress on Crack Pattern Formation in Thin Films.

Controlling the Surface Buckling Wrinkles by Patterning the Material System of Hard-Nano-film/soft-matter-substrate

Active Control of Surface Integrity in Thin Film Scratching and Finishing

Crack-Free Controlled Wrinkling of A Bilayer Film with A Gradient Interface

Crack coalescence mechanism of flaw pairs under biaxial loading conditions using additively printed models and photoelastic experiments

Controlling and Prevention of Surface Wrinkling Via Size-Dependent Critical Wrinkling Strain.

The estimation of residual stresses by the brittle thin film’s initial cracks on a ductile substrate subjected to tensile stresses

Controlling and visualizing fracture of 2D crystals by wrinkling

Controlling and Monitoring Crack Propagation in Monolayer Graphene Single Crystals

Ordered Ring-Shaped Cracks Induced by Indentation in Metal Films on Soft Elastic Substrates

Wrinkling of Thin Films on a Microstructured Substrate

FORMATION OF CRACK-LIKE DIFFUSION WEDGES AND COMPRESSIVE STRESS EVOLUTION DURING THIN FILM GROWTH WITH INHOMOGENEOUS GRAIN BOUNDARY DIFFUSIVITY

Hierarchical Wrinkles and Oscillatory Cracks in Metal Films Deposited on Liquid Stripes.

Harnessing multimodal wrinkle patterns in flexible films by three-axial mechanical loading