Abstract:Construction of nanoarchitectures requires techniques like joint formation and trimming. For ceramic materials, however, it is extremely difficult to form nanojoints by conventional methods like merging. In this work, we demonstrate that ceramic titanate nanowires (NWs) can be joined by spot melting under electron beam (e-beam) irradiation (EBI). The irradiation fuses the contacted spot of titanate NWs yielding an intact nanojoint. Nanojoints with different morphologies can be produced. The joint structures consist of titanium dioxide (TiO2) rutile, anatase, and titanate phases in the direction away from the e-beam melting spot. The titanate binds to anatase via a crystallographic matching coherent interface (the oxygen atoms at the interface are shared by the two phases) and the anatase solidly binds to the rutile joint. The resulting rutile joint is stable at high temperatures. Additionally, it is demonstrated that the heat production from EBI treated rutile can be utilized to break metal NWs (Ag, Cu, and Ni) apart by spot melting. The required e-beam intensity is considerably mild (75 pA/cm2) which allows visual access and control over the NW melting. Direct melting of Ag and Cu is not applicable under EBI due to their high thermal conductivity even with high current density (500 pA/cm2). Our findings reveal that ceramic nanojoint formation and spot melting at nanoscale are applicable if the properties of nanomaterials are understood and properly utilized.

Nanoscale cold welding of glass

Size-Dependent Brittle-To-Ductile Transition in Silica Glass Nanofibers

Nanojoint Formation Between Ceramic Titanate Nanowires and Spot Melting of Metal Nanowires with Electron Beam

The mechanism of the welding between silica glass and 304 stainless steel using nanosecond fibre laser

Molecular Dynamic Simulation on Collision Induced Cold Welding in Ceramic Nanoparticles

Cold Welding of Ag Nanowires by Large Plastic Deformation

Microwelding of Glass to Silicon by Green Ultrafast Laser Pulses

Laser Assisted Welding of Gold Nanowires

Ultrasonic-assisted rapid cold welding of bulk metallic glasses

High-Strength Welding of Silica Glass Using Double-Pulse Femtosecond Laser under Non-Optical Contact Conditions

Direct joining of quartz glass and copper by nanosecond laser

10.1063/1.5084134.2

Welding Fused Silica Glass By Picosecond Pulsed Laser with Low Numerical Aperture

Optically Controlled Local Nanosoldering of Metal Nanowires

Improved Femtosecond Laser Welding of Nonoptical Contact Glass by Pressure and a Water Intermediate Layer

Electron beam-induced athermal nanowelding of crossing SiO x amorphous nanowires

Cold joining to fabricate large size metallic glasses by the ultrasonic vibrations

Ultrafast Shape Change and Joining of Small-Volume Materials Using Nanoscale Electrical Discharge

Ceramic nanowelding

Electron-beam-assisted superplastic shaping of nanoscale amorphous silica

Investigation of the Reaction Mechanism and Optical Transparency in Nanosecond Laser Welding of Glasses Assisted with Titanium Film