Abstract:Electrochemical impedance spectroscopy (EIS) is a widely used electroanalytical technique. A consequence of small amplitude modulation of the electrochemical interface is the linearization of inherently nonlinear processes, easing analysis, but giving up some mechanistic discriminating power. An example of this diminished discriminating power is degeneracy among linearized physics-based models [1] and even equivalent circuits [2]. The discriminating power of EIS is further degraded in situations where a two-electrode cell configuration is required, in which case, the total cell impedance is the sum of two half-cell impedances, plus an ohmic drop of the electrolyte. The summative nature of two-electrode EIS (a positive parity signal) makes the assignment of physicochemical processes to one electrode or the other extremely challenging without additional information. We have shown that second harmonic nonlinear electrochemical impedance spectroscopy (NLEIS), a natural extension of EIS achieved with somewhat larger modulations, can break model degeneracy and provide more information than EIS alone. [3,4] An added feature of second harmonic NLEIS acquired in a two-electrode cell is that the signal arises from the difference between each half-cell response (a negative parity signal). The complementary parity between EIS and second harmonic NLEIS, when analyzed with a common physics-based model, makes discriminating half-cell processes from two-electrode measurements feasible. To pave the foundation of NLEIS analysis, the first (EIS) and second harmonic (NLEIS) impedance responses of a simple electrochemical interface are considered, building from well-known Helmholtz double layer, Butler–Volmer kinetics, and solid state Fickian diffusion (to align with experimental lithium insertion chemistry). The linearized portion of this model produces a classic Randles circuit with Warburg impedance, whereas the second harmonic reveals a dependence on charge transfer symmetry and the second derivative of the open circuit voltage with insertion charge. We then adopted and extended Paasch’s macro-homogeneous porous electrode theory [5] to describe the linear and nonlinear impedance responses of a porous electrode. Half-cell models are then combined into whole-cell models to describe lithium-ion battery (LIB) systems. Experimentally, EIS and second harmonic NLEIS obtained with 1.5 Ah Samsung 18650 NMC|C cells are analyzed. Figure 1 demonstrates that our more sophisticated extended Paasch model can accurately fit the positive parity EIS and negative parity NLEIS data with a total of 15 meaningful physicochemical parameters (11 for the linear response and 4 additional for the nonlinear response). A data analysis pipeline is built based on these models to analyze a dataset that composed of 48 commercial LIBs cycled under four different aging conditions, and evaluated at 10%, 30%, and 50% state of charge (SOC). The co-evolution of EIS and NLEIS parameters from our analysis provides several insights, with perhaps the most interesting being the simultaneous increase in charge transfer resistance on the positive electrode and the breaking of charge transfer symmetry at the same time (for low SOC). These results demonstrate that the coupling of EIS and NLEIS can advance electrochemical impedance analysis with small changes from traditional EIS. Open-source software is described that leverages impedance.py to enable the easy implementation of EIS and NLEIS data analysis. References [1] J.R. Wilson, D.T. Schwartz, S.B. Adler, Nonlinear electrochemical impedance spectroscopy for solid oxide fuel cell cathode materials, Electrochimica Acta . 51 (2006) 1389–1402. https://doi.org/10.1016/j.electacta.2005.02.109. [2] S. Fletcher, Tables of degenerate electrical networks for use in the equivalent‐circuit analysis of electrochemical systems, J. Electrochem. Soc . 141 (1994) 1823–1826. https://doi.org/10.1149/1.2055011. [3] M.D. Murbach, D.T. Schwartz, Extending newman’s pseudo-two-dimensional lithium-ion battery impedance simulation approach to include the nonlinear harmonic response, J. Electrochem. Soc. 164 (2017) E3311–E3320. https://doi.org/10.1149/2.0301711jes. [4] M.D. Murbach, V.W. Hu, D.T. Schwartz, Nonlinear electrochemical impedance spectroscopy of lithium-ion batteries: Experimental approach, analysis, and initial findings, J. Electrochem. Soc . 165 (2018) A2758–A2765. https://doi.org/10.1149/2.0711811jes. [5] G. Paasch, K. Micka, P. Gersdorf, Theory of the electrochemical impedance of macrohomogeneous porous electrodes, Electrochimica Acta . 38 (1993) 2653–2662. https://doi.org/10.1016/0013-4686(93)85083-B. Figure 1

Second-Harmonic Nonlinear Electrochemical Impedance Spectroscopy: II. Model-Based Analysis of Lithium-Ion Battery Experiments

Coupling Linear and Second-Harmonic Electrochemical Impedance Spectroscopy to Determine Half-Cell Physicochemical Processes from Measurements in Two-Electrode Cells

Modeling and applications of Electrochemical Impedance Spectroscopy (EIS) for Zinc-ion batteries

Nonlinear electrochemical impedance spectroscopy for lithium-ion battery model parameterization

Extracting and Interpreting Electrochemical Impedance Spectra (EIS) from Physics-Based Models of Lithium-Ion Batteries

Operando Electrochemical Impedance Spectroscopy and Its Application to Commercial Li-Ion Batteries

Analysis of Lithium-ion Batteries through Electrochemical Impedance Spectroscopy Modeling

Impedance analysis of a lithium-ion battery using the electrochemical impedance spectroscopy

Health Indicators Identification of Lithium-Ion Battery From Electrochemical Impedance Spectroscopy Using Geometric Analysis

Electrochemical impedance characteristics at various conditions for commercial solid–liquid electrolyte lithium-ion batteries: Part 1. experiment investigation and regression analysis

Theory of Impedance Spectroscopy for Lithium Batteries

Robust Approach to Battery Equivalent-Circuit-Model Parameter Extraction Using Electrochemical Impedance Spectroscopy

An electrochemical impedance model of lithium-ion battery for electric vehicle application

Electrochemical impedance characteristics at various conditions for commercial solid–liquid electrolyte lithium-ion batteries: Part. 2. Modeling and prediction

A mathematical approach to survey electrochemical impedance spectroscopy for aging in lithium-ion batteries

Physics Based Temperature Dependent EIS Simulation on 18650 NMC/Graphite Cell

Non-invasive diagnosis of solid electrolyte interphase and charge transfers resistances for degraded lithium-ion batteries

On-Board Diagnostics for Li-Ion Batteries Using Electrochemical Impedance Spectroscopy (EIS)-Based Health Estimation Models

Lithium-Ion Battery Diagnostics Using Electrochemical Impedance Via Machine-Learning

An Electrochemistry-Based Impedance Model for Lithium-Ion Batteries

Insights into Charge Transfer Dynamics of Li Batteries through Temperature-Dependent Electrochemical Impedance Spectroscopy (EIS) Utilizing Symmetric Cell Configuration