Abstract:Bioethanol, is a potential alternate source of energy, renewable and safe. Ethanol production from value added food and feedstock has also not shown growth as estimated. Of late, the second generation processes of production of ethanol, such as from lignocellulosic biomass out of agricultural/domestic waste has been gaining considerable momentum. Here, we explored a new approach for optimizing the conditions of physiochemical pretreatment as well as fermentation process using peels of Ananas cosmosus as substrate and immobilized yeast Pachysolen tannophilus MTCC.1077 and Pichia stipitis NCIM 3498. We have also studied the influence of process variables such as incubation temperature, inoculum concentration and different nutrients on ethanol production. Pulverized peels of A. cosmosus recorded 25 ± 0.31% cellulose, 28 ± 0.18% hemicellulose and 8 ± 0.07% of lignin on dry solid (DS) basis. Peels of A. cosmosus delignified with 1% H2SO4 yielded 18.89% glucose, 38.81% xylose and 29.31% fructose under thermochemical pretreatment using autoclave (121 degrees C, 20 min.), with a hydrolytic efficiency of 75.52 ± 0.45%. FTIR spectroscopy results not only indicated the penetration of H2SO4 in the amorphous region of the biomass and degradation of hemicelluloses but also showed the structural differences before and after pretreatment. The enzymes required for hydrolysis were prepared from culture supernatants of Trichoderma reesei NCIM 1052 using wheat bran as carbon source under submerged fermentation conditions on rotatory shaker incubator (at 28 degrees C for 10 days). Enzyme activity (U/ml) of crude cellulase produced by T. reesei NCIM 1052 was 311.1 μmole/ml/min. Delignified A. cosmosus peel yielded 51.71 ± 0.44 g/l glucose when enzymatically hydrolysed by crude cellulase at the substrate enzyme ratio of 1:5. Simultaneous saccharification and fermentation (SSF) of peels of A. cosmosus by crude cellulase and separately entrapped Pichia stipitis NCIM 3498 (now known as Scheffersomyces stipitis) and Pachysolen tannophilus MTCC 1077 cells in calcium alginate beads were also investigated in the present study. The fermentation experiments were carried out at flask level. The processing parameters setup for reaching a maximum response for ethanol production was obtained when applying the optimum values for temperature (32 degrees C), inoculum level (6%) and fermentation medium (ammonium sulphate, KH2PO4, peptone and yeast extract) for P. tannophilus MTCC 1077 and temperature (30 degrees C), inoculum level (2%) and fermentation medium (ammonium sulphate, KH2PO4, peptone and yeast extract) for S. stipitis NCIM 3498. Maximum ethanol concentration 10.5 g/l and 10.9 g/l was obtained from P. tannophilus MTCC 1077 and S. stipitis NCIM 3498, respectively at the optimized process conditions in anaerobic batch fermentation.

Simulation of ethanol recovery and economic analysis of pectin production on an industrial scale

PASSION FRUIT BY-PRODUCT: PROCESS DESIGN OF PECTIN PRODUCTION

Extraction of Pectin from Passion Fruit Peel

Sequential extraction of flavonoids and pectin from yellow passion fruit rind using pressurized solvent or ultrasound

Extraction of pectin from agroindustrial residue with an ecofriendly solvent: use of FTIR and chemometrics to differentiate pectins according to degree of methyl esterification

Use of Mixed Fruit Waste Aimed at Producing Bioethanol and Extracting D-Limonene

Eco-friendly simultaneous extraction of pectins and phenolics from passion fruit ( Passiflora edulis Sims) peel: Process optimization, physicochemical properties, and antioxidant activity

Economic evaluation of pressurized liquid extraction system scale-up: a potential new business opportunity for yerba mate (Ilex paraguariensis St.-Hil.) waste reuse

Development and application of green and sustainable analytical methods for flavonoid extraction from Passiflora waste

Biorefinery approach for an integrated valorisation of grape pomace in distilleries

Drying of Albedo and Whole Peel of Yellow Passion Fruit

An eco-friendly extraction method to obtain pectin from passion fruit rinds (Passiflora edulis sp.) using subcritical water and pressurized natural deep eutectic solvents

Optimization of extraction of high-ester pectin from passion fruit peel (Passiflora edulis flavicarpa) with citric acid by using response surface methodology

High value-added products from the orange juice industry waste

Economic value and environmental impact analysis of lignocellulosic ethanol production: assessment of different pretreatment processes

Biovalorization potential of peels of Ananas cosmosus (L.) Merr. for ethanol production by Pichia stipitis NCIM 3498 & Pachysolen tannophilus MTCC 1077

Bioactive, technological-functional potential and morphological structures of passion fruit albedo (Passiflora edulis)

Process development and techno‐economic analysis of bio‐based succinic acid derived from pentoses integrated to a sugarcane biorefinery

Dual-objective optimization of ultrasound-assisted organic acid extraction of pectin from umbu (Spondias tuberosa L.): a promising Brazilian native fruit from Caatinga biome