Abstract:Background: Conventional light sheet fluorescence microscopy (LSFM), or selective plane illumination microscopy (SPIM), enables high-resolution 3D imaging over a large volume by using two orthogonally aligned objective lenses to decouple excitation and emission. The recent development of oblique plane microscopy (OPM) simplifies LSFM design with only one single objective lens, by using off-axis excitation and remote focusing. However, most reports on OPM have a limited microscopic field of view (FOV), typically within 1×1 mm2. Our goal is to overcome the limitation with a new variant of OPM to achieve a mesoscopic FOV. Methods: We implemented an optical design of mesoscopic scanning OPM to allow the use of low numerical aperture (NA) objective lenses. The angle of the intermediate image before the remote focusing system was increased by a demagnification under Scheimpflug condition such that the light collecting efficiency in the remote focusing system was significantly improved. A telescope composed of cylindrical lenses was used to correct the distorted image caused by the demagnification design. We characterized the 3D resolutions and imaging volume by imaging fluorescent microspheres, and demonstrated the volumetric imaging on intact whole zebrafish larvae, mouse cortex, and multiple Caenorhabditis elegans (C. elegans). Results: We demonstrate a mesoscopic FOV up to ~6×5×0.6 mm3 volumetric imaging, the largest reported FOV by OPM so far. The angle of the intermediate image plane is independent of the magnification as long as the size of the pupil aperture of the objectives is the same. As a result, the system is highly versatile, allowing simple switching between different objective lenses with low (10×, NA 0.3) and median NA (20×, NA 0.5). Detailed microvasculature in zebrafish larvae, mouse cortex, and neurons in C. elegans are clearly visualized in 3D. Conclusions: The proposed mesoscopic scanning OPM allows using low NA objectives such that centimeter-level FOV volumetric imaging can be achieved. With the extended FOV, simple sample mounting protocol, and the versatility of changeable FOVs/resolutions, our system will be ready for the varieties of applications requiring in vivo volumetric imaging over large length scales.

Wide field-of-view volumetric imaging by a mesoscopic scanning oblique plane microscopy with switchable objective lenses

Nonlinear Focal Modulation Microscopy Based on Interleaved Reconstruction

Chip-compatible wide-field 3D nanoscopy through tunable spatial frequency shift effect

An oblique plane microscope for mesoscopic imaging of freely moving organisms with cellular resolution

Full-aperture extended-depth oblique plane microscopy through dynamic remote focusing

Optical Volumetric Projection with Large NA Objectives for Fast High-Resolution 3D Imaging of Neural Signals

Adaptive Optics in an Oblique Plane Microscope

Multi-plane, wide-field fluorescent microscopy for biodynamic imaging in vivo .

Nonlinear Focal Modulation Microscopy

Multi-focus Light-Field Microscopy for High-Speed Large-Volume Imaging

Single-Shot 3D Widefield Fluorescence Imaging with a Computational Miniature Mesoscope

Integrated one- and two-photon scanned oblique plane illumination (SOPi) microscopy for rapid volumetric imaging

Multiscale Light Field Microscopy Platform for Multi-purpose Dynamic Volumetric Bioimaging

High‐Speed Multi‐Modal Extended Depth‐of‐Field Microscopy with an Electrically Tunable Lens

Compact, Hybrid Light-Sheet and Fourier Light-Field Microscopy with a Single Objective for High-Speed Volumetric Imaging in Vivo

Large Field of View and Isotropic Light Sheet Microscopy with Aberration-Free Tunable Foci

Continuous Optical Zoom Microscope with Extended Depth of Field and 3D Reconstruction

Wide-field axial plane optical microscopy

High axial resolution imaging system for large volume tissues using combination of inclined selective plane illumination and mechanical sectioning.

Confocal imaging capacity on a widefield microscope using a spatial light modulator