Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Summary</h3> <div class="article-section__content en main"> <p>A core design of small modular liquid‐metal fast reactor (SMLFR) cooled by lead‐bismuth eutectic (LBE) was developed for power reactors. The main design constraint on this reactor is a size constraint: The core needs to be small enough so that (1) it can be transported in a spent nuclear fuel (SNF) cask to meet the electricity demands in remote areas and off‐grid locations or so that (2) it can be used as a power source on board of nuclear icebreaker ships. To satisfy this design requirement, the active core of the reactor is 1 m in height and 1.45 m in diameter. The reactor is fueled with natural and 13.86% low‐enriched uranium nitride (UN), as determined through an optimization study. The reactor was designed to achieve a thermal power of 37.5 MW with an assumption of 40% thermal efficiency by employing an advanced energy conversion system based on supercritical carbon dioxide (S‐CO<sub>2</sub>) as working fluid, in which the Brayton cycle can achieve higher conversion efficiencies and lower costs compared to the Rankine cycle. The outer region of the core with low‐enriched uranium (LEU) performs the function of core ignition. The center region plays the role of a breeding blanket to increase the core lifetime for long cycle operation. The core working fluid inlet and outlet temperatures are 300°C and 422°C, respectively. The primary coolant circulation is driven by an electromagnetic pump. Core performance characteristics were analyzed for isotopic inventory, criticality, radial and axial power profiles, shutdown margins (SDM), reactivity feedback coefficients, and integral reactivity parameters of the quasi‐static reactivity balance. It is confirmed through depletion calculations with the fast reactor analysis code system Argonne Reactor Computation (ARC) that the designed reactor can be operated for 30 years without refueling. Preliminary thermal‐hydraulic analysis at normal operation is also performed and confirms that the fuel and cladding temperatures are within normal operation range. The safety analysis performed with the ARC code system and the UNIST Monte Carlo code MCS shows that the conceptual core is favorable in terms of self‐controllability, which is the first step towards inherent safety. </p>

Core reduction for increasing neutron flux and radioisotope production in the IEA-R1 research reactor

WWR-K reactor LEU core design optimization for improving the experimental characteristics

An Optimization Design Study of Producing Transuranic Nuclides in High Flux Reactor

Reactivity Coefficients in BN-600 Core with Minor Actinides

Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor

Investigation on Radioisotopes Evolution in the Fuel of Lead-Bismuth Eutectic (LBE) Cooled SPARK-NC Core

Improved design of LBE cooled solid reactor using 3D neutronics thermal-hydraulics coupling method

Core design of long‐cycle small modular lead‐cooled fast reactor

Scoping Studies of Reactor Core Parameters in Support of the Abilene Christian University Molten Salt Research Reactor

Neutron analysis for homogeneous nuclear reactor core with a U–Th fuel matrix

Iris Reactor Core with Thorium Fuel

Axial Power Distribution Using Improved Axial Reflector Constants Calculation

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

A 3D Transport-Based Core Analysis Code for Research Reactors with Unstructured Geometry

Stochastic modeling of a neutron imaging center at the Brazilian Multipurpose Reactor

Characteristics of Irradiation Production of Radioisotope in an Ultra-High Flux Research Reactor

The Impact of Isotopic Composition of Lead on the Neutron-Physical Characteristics of Fast Reactor with Liquid Metal Coolant

Analysis of the experimental tests performed at NACIE-UP facility through a novel CFX-RELAP5 codes coupling

Enhancing fuel breed-burn performance in a sodium-cooled fast reactor using a novel reactivity control method

Transition Core Modeling for Extended-Enrichment Accident-Tolerant Fuels in Light Water Reactors Using PARCS/Polaris