The evidence of gene duplication for S-form NADP-linked isocitrate dehydrogenase in carp and goldfish

A. Quiroz-Gutiérrez,S. Ohno

DOI: https://doi.org/10.1007/BF00484021

1970-02-01

Biochemical Genetics

Abstract:

What problem does this paper attempt to address?

Effective Removal of Cesium by New Functionalized 1,3-Alternate Calixcrown Materials Immobilized on a Silica Carrier

Anyun Zhang,Rongrong Chen,Zheng Wang,Jiatian Su,Wenwen Zhang

DOI: https://doi.org/10.1080/07366299.2021.1961424

2022-01-01

Solvent Extraction and Ion Exchange

Abstract:Removal of Cs isotopes, one of the heat generators present in used fuel/reprocessing waste, is one of the most challenging obstacles in the disposal of these materials. For this purpose, a new silica-calix[4]crown material, CBisC6@SiO2, has been prepared. The material was created coupling a symmetric calixcrown derivative CBisC6 into the pores and channels of the SiO2-P particles through vacuum hybridization and immobilization. SEM, Si-29 solid-state CP/MAS NMR, N-2 adsorption-desorption isotherms, TGA-DSC and XPS were used to characterize the structure of the final material. The adsorption of Cs and some representative metals onto CBisC6@SiO2 has been investigated in the range of 0.4 to 6.0 M HNO3. CBisC6@SiO2 showed strong adsorption ability and selectivity for Cs over all of others except for Rb in 3.0 M HNO3. The adsorption mechanism of Cs was verified using XRD and FT-IR spectra. The separation of Cs from other waste materials by CBisC6@SiO2 was performed through six adsorption-desorption cycles. The removal efficiency of Cs was 99.5%, while other fission products were weakly absorbed except for Rb with the removal efficiency of 85.3%. A nearly quantitative removal of Cs by CBisC6@SiO2 was achieved.
Adsorption of Cesium and Some Typical Coexistent Elements Onto a Modified Macroporous Silica-Based Supramolecular Recognition Material.

Anyun Zhang,Qihui Hu

DOI: https://doi.org/10.1016/j.cej.2010.02.031

IF: 15.1

2010-01-01

Chemical Engineering Journal

Abstract:To find an effective method in separation of Cs(I), an advanced macroporous silica-based supramolecular recognition composite, (Calix[4]+MODB)/SiO2-P, was synthesized. It was done by impregnation and immobilization of 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene (Calix[4]arene-R14) and methyloctyl-2-di-methy-lbutanemide (MODB) into the pores of the SiO2-P particles. MODB was used to modify Calix[4]arene-R14. The adsorption of some typical fission products such as Mo(VI), Pd(II), La(III), Y(III), Ru(III), Rh(III), Cs(I), and Zr(IV) contained in highly active liquid waste (HLW) onto (Calix[4]+MODB)/SiO2-P was investigated. It was performed by examining the effects of contact time, the concentration of HNO3 in the range of 0.3–7.0M, and operation temperature on the adsorption of the tested metals. (Calix[4]+MODB)/SiO2-P showed strong adsorption ability and excellent selectivity for Cs(I) over all the tested metals. The separation of Cs(I) from a simulated HLW containing 5.0mM of the tested elements was performed by (Calix[4]+MODB)/SiO2-P packed column at 298K. Mo(VI), Pd(II), La(III), Y(III), Ru(III), Rh(III), and Zr(IV) showed no adsorption and were eluted into effluent along with 3.0M HNO3. Cs(I) adsorbed by (Calix[4]+MODB)/SiO2-P was effectively eluted with water and then separated from the others. The results demonstrated that in 3.0M HNO3, (Calix[4]+MODB)/SiO2-P is promising to apply in separation of Cs(I), one of the heat generators, from HLW in the SPEC (Strontium/Cesium Partitioning from HLW by Extraction Chromatography) process developed recently.
Preparation of A Novel Macroporous Silica-Based Diglycolamide Derivative-Impregnated Polymeric Composite and Its Adsorption Mechanism for Rare Earth Metal Ions

Anyun Zhang,Chenmei Mei,Yuezhou Wei,Mikio Kumagai

DOI: https://doi.org/10.1260/026361707783432579

2007-01-01

Adsorption Science & Technology

Abstract:Diethylenetriaminepentaacetic acid (DTPA), a multi-dentate acidic chelating agent containing five carboxyl and three amine groups all capable of protonation, is a pentabasic acid. To separate minor actinide [MA(III)] and rare earth [RE(III)] elements effectively from a HNO3 solution containing DTPA generated in the MAREC process, a functional polymeric composite impregnated with a novel macroporous silica-based diglycolamide compound, N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA), was prepared. Thus, the impregnated functional polymeric composite (TODGA/SiO2-P) was obtained by impregnating and immobilizing TODGA molecules in the pores of the SiO2-polymer (SiO2-P) particles (ca. 50 μm diameter) via a vacuum sucking technique. The effects of H+ ions within the concentration range 0.01–3.0 M and of NO3− ions within the range 0.1–3.115 M on the adsorption of RE(III) ions onto TODGA/SiO2-P were investigated at 298 K. It was found that in the presence of 0.05 M DTPA, the DTPA species strongly affected the adsorption of RE(III) ions. The adsorption capability of TODGA/SiO2-P depended on the competitive reactions of RE(III) ions with two species, viz. H4DTPA− and H2DTPA3−. The distribution coefficient (Kd) for RE(III) ions increased with increasing NO3− concentration, with one RE(III) ion reacting with two NO3− ions. The adsorption mechanism of RE(III) ions towards the TODGA/SiO2-P polymeric composite in HNO3 solution containing 0.05 M DTPA was suggested as: [Formula: see text] The formation of H4DTPA− and RE(H4DTPA)(NO3)2 which are both capable of adsorbing with TODGA/SiO2-P was the main reason why RE(III) ions exhibited such significant adsorption in the presence of 0.05 M DTPA.
Preparation of a Novel Macroporous Silica-Based 2,6-Bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine Impregnated Polymeric Composite and Its Application in the Adsorption for Trivalent Rare Earths

Anyun Zhang,E. Kuraoka,M. Kumagai

DOI: https://doi.org/10.1007/s10967-006-6923-z

2007-01-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:A novel macroporous silica-based 2,6-bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine (iso-Bu-BTP), a neutral chelating agent having several softatom nitrogen, polymeric composite (iso-Bu-BTP/SiO 2 -P) was synthesized. It was done through impregnation and immobilization of iso-Bu-BTP molecule into the pores of SiO 2 -P particles with 40–60 μm of bead diameter and 0.6 μm of mean pore size. The effective impregnation resulted from the intermolecular interaction of iso-Bu-BTP and co-polymer inside the SiO 2 -P particles by a vacuum sucking technique. To understand the possibility of applying iso-Bu-BTP in the MAREC process developed, the adsorption behavior of a few representative rare earths (REs) such as Ce(III), Nd(III), Gd(III), Dy(III), Er(III), Yb(III), and Y(III) towards iso-Bu-BTP/SiO 2 -P was investigated at 298 K. The influence of the HNO 3 concentration in a wide range of pH 5.52–3.0M and a few chelating agents such as formic acid, citric acid, and diethylenetriaminepentaacetic acid (DTPA) on the adsorption of RE(III) was examined. It was found that in the presence of chelating agent, the adsorption ability of the tested RE(III) towards iso-Bu-BTP/SiO 2 -P decreased due to two competition reactions of RE(III) with iso-Bu-BTP/SiO 2 -P and chelating agents. In a 0.01M HNO 3 solution containing 1M formic acid or 1M citric acid, light RE(III) showed lower adsorption towards iso-Bu-BTP/SiO 2 -P than that of the heavy one. This makes the separation of light RE(III) from the heavy one possible. Based on the similarity of minor actinides and heavy RE(III) in chemical properties and the results of column separation experiments, chromatographic partitioning of light RE(III) from a simulated high level liquid waste solution composed of the heavy RE(III) and minor actinides in MAREC process is promising.
Impregnation synthesis of a novel macroporous silica-based TODGA polymeric composite and its application in the adsorption of rare earths in nitric acid solution containing diethylenetriaminepentaacetic acid

Anyun Zhang,Etsushu Kuraoka,Mikio Kumagai

DOI: https://doi.org/10.1016/j.eurpolymj.2006.10.034

IF: 6

2007-01-01

European Polymer Journal

Abstract:A macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) polymeric composite (TODGA/SiO2-P) was synthesized. It was done through impregnation and immobilization of TODGA molecule into the pores of the SiO2-P particles utilizing a vacuum sucking technique. The macroporous SiO2-P particles were the silica-based organic/inorganic composite synthesized by immobilizing styrene–divinylbenzene copolymer inside SiO2 through the complicated polymerization reaction. The adsorption of rare earth (RE(III)) elements onto TODGA/SiO2-P was investigated in HNO3 solution containing diethylenetriaminepentaacetic acid (DTPA), an acidic multi-dentate chelating agent. It was found that in the presence of 0.05M DTPA, NO3- and H+ had significant effect on the TODGA/SiO2-P adsorption due to the competition reactions of RE(III) with different species, H4DTPA− and H2DTPA3−. With an increase in the concentration of NO3- from 0.115M to 3.015M, the adsorption of RE(III) onto TODGA/SiO2-P increased noticeably. On the other hand, RE(III) showed strong adsorption at 0.1M H+, weak adsorption at around pH 2, and no adsorption in excess of pH 2.3. In a 0.1M H+–0.115M NO3-–0.05M DTPA solution, a change of the distribution coefficient of RE(III) onto TODGA/SiO2-P with an increase in atomic number of RE(III) from La(III) to Lu(III) was investigated. The silica-based TODGA/SiO2-P polymeric composite showed strong adsorption for heavy RE(III) over the light one. In a 0.01M H+–1.0M NO3-–0.05M DTPA solution, the effect of the ratio of solid phase to liquid one on the relationship of the distribution coefficient of RE(III) with the change in atomic number of RE(III) was also studied. Based on the complicated disassociation equilibrium of DTPA, the influence of the concentrations of NO3- and H+ on the adsorption of TODGA/SiO2-P for RE(III) was demonstrated. This makes the partitioning of RE(III) and MA(III) together from high level liquid waste (HLLW) by the polymeric composite TODGA/SiO2-P promising.
Radiation Syntheses and Performance of Novel Hierarchically Macro-/Mesoporous Silica Adsorbents with Quaternary Phosphonium for the High Selective Removal of Perrhenate

Shouchao Zhong,Xingxiao Li,Yue Wang,Dong Han,Jing Peng,Yan Hao,Long Zhao,Jiuqiang Li,Maolin Zhai

DOI: https://doi.org/10.1021/acssuschemeng.1c02142

IF: 8.4

2021-01-01

ACS Sustainable Chemistry & Engineering

Abstract:A novel quaternary phosphonium-grafted hierarchically macro-/mesoporous silica, named as HPS-C-P, was synthesized by alkylating hierarchically porous silica with trimethylchlorosilane and a subsequent two-step radiation-induced grafting of quaternary phosphonium. Fourier transform infrared, X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller, and scanning electron microscopy analyses testified that alkyl and quaternary phosphonium groups were grafted uniformly in HPS-C-P. The adsorption of HPS-C-P for ReO4- was evaluated and it was found that the adsorption equilibrium could be achieved within 4 min, and the adsorption isotherm was fitted well by the modified Langmuir model. The maximum ReO4- uptake of this adsorbent could reach 140.5 mg.g(-1), which was higher than the quaternary phosphonium-grafted hierarchically porous silica synthesized by a chemical method. HPS-C-P has good radiation resistance and cyclic adsorption performance, and the adsorption selectivity of HPS-C-P toward ReO4- in the presence of competitive anions, including NO3-, SO42-, Cl-, CO32-, and PO43-, is extremely high, which is higher than most of the adsorbents reported in recent literature studies. Infrared and XPS analysis revealed that ReO4- was adsorbed onto HPS-C-P through the ion-exchange mechanism. This work provided a new method to produce highly efficient silica-based adsorbents to selectively remove Re from an aqueous solution even exposed to a radiation environment.
Impregnation synthesis of a novel macroporous silica-based crown ether polymeric material modified by 1-dodecanol and its adsorption for strontium and some coexistent metals

Anyun Zhang,Chunmei Chen,Etsushu Kuraoka,Mikio Kumagai

DOI: https://doi.org/10.1016/j.seppur.2008.02.016

IF: 8.6

2008-01-01

Separation and Purification Technology

Abstract:4,4′,(5′)-Di-(tert-butylcyclohexano)-18-crown-6(DtBuCH18C6) is a chelating agent having high selectivity mostly for Sr(II). To significantly reduce its leakage by molecular modification, a macroporous silica-based DtBuCH18C6 polymeric composite (DtDo/SiO2–P) was synthesized. It was performed by impregnating and immobilizing DtBuCH18C6 and 1-dodecanol molecules into the pores of the SiO2–P particles utilizing an advanced vacuum sucking technique. The adsorption of a few fission and non-fission products Sr(II), Ba(II), Cs(I), Ru(III), Mo(VI), Na(I), K(I), Pd(II), La(III), and Y(III) onto DtDo/SiO2–P was investigated. It was done by examining the effects of contact time and the HNO3 concentration in a range of 0.1–5.0M at 298K. At the optimum concentration of 2.0M HNO3, DtDo/SiO2–P exhibited strong adsorption ability and high selectivity for Sr(II) great over all of the tested elements, which showed very weak or almost no adsorption except Ba(II). Meanwhile, It was found that the quantity of total organic carbon (TOC) leaked from DtDo/SiO2–P in 2.0M HNO3, 187.5ppm, was lower than 658.4ppm that leaked from DtBuCH18C6/SiO2–P, which was not modified. This was ascribed to the effective association of DtBuCH18C6 and 1-dodecanol through intermolecular interaction. The reduction of DtBuCH18C6 leakage by molecular modification with 1-dodecanol was achieved. It was of great benefit to application of DtDo/SiO2–P in chromatographic partitioning of Sr(II), one of the main heat generators, from high level liquid waste (HLLW) in reprocessing of nuclear spent fuel in the MAREC (Minor Actinides Recovery from HLLW by Extraction Chromatography) process developed recently.
Dication-accelerated anion transport inside micropores for the rapid decontamination of pertechnetate

Peng Zhang,Yi-Zhi Chen,Han-Qin Weng,Zi-Fang Guo,Jia-Liang Chen,Xing Zhao,Guo-An Ye,Ming-Zhang Lin

DOI: https://doi.org/10.1007/s41365-022-01026-w

2022-04-01

Nuclear Science and Techniques

Abstract:Over 70% of the treated contaminated water at the Fukushima Daiichi Nuclear Power Station contains radionuclides beyond the regulatory standard for discharge that need to be re-purified. Technetium-99 (99Tc), mainly in the form of pertechnetate Tc(VII)O4−, is one of the main sources of long-term radiotoxicity that jeopardizes the environment and human health. Herein, we used a series of dicationic pyridinium (DCP) derivative groups (–Py+CnH2nN+Me3, n = 2, 3, and 5) to modify commercial Reillex 425 resins containing tertiary pyridyl groups to improve the adsorption performance of rhenium (Re, an analog of radioactive Tc) and Tc. As the quaternary pyridinium and ammonium sites in one DCP group can adsorb ReO4− simultaneously, DCP-modified Reillex 425 (Reillex-Cn) exhibited high maximum adsorption capacities for Re under neutral conditions. Adsorption capacities reached 344.8, 416.7, and 588.2 mg g−1 for Reillex 425-C2, Reillex 425-C3, and Reillex 425-C5, respectively. Intraparticle diffusion of ReO4−/TcO4− in Reillex 425-Cn was verified to be the rate-limiting step of adsorption. However, adsorption can be adjusted by the length of the alkyl spacers between the two positively charged N sites in DCP. –Py+C2H4N+Me3 significantly enhanced intraparticle diffusion compared to –Py+C5H10N+Me3. The two positive sites in –Py+C2H4N+Me3 would be laterally distributed, leading to a smaller steric hindrance for ReO4–/TcO4− transport inside the microporous channels. Meanwhile, the longer alkyl spacers in –Py+C5H10N+Me3 formed hydrophobic microphases, repulsing the hydrated ReO4–/TcO4− anions. Thus, the adsorptions of both ReO4− and TcO4− on Reillex 425-C2 were faster than those on Reillex 425-C5. Moreover, Reillex 425-Cn exhibited an exothermic nature, good selectivity, excellent reusability, and strong salinity tolerance. This study provides a simple strategy to enhance the Tc removal performance of adsorbents containing abundant micropores, which implies enormous environmental and economic benefits.

physics, nuclear,nuclear science & technology
Efficient removal of perrhenate/pertechnetate by a pyridinium-based porous polymer

Miaomiao He,Yuxuan Chen,Guangyuan Chen,Wenhao Li,Mingxing Zhang,Chao Zhang,Hao Zhang,Xingyi Long,Kui Tang,Tao Duan,Lin Zhu

DOI: https://doi.org/10.1016/j.envpol.2024.124442

2024-09-15

Abstract:The extraction of 99TcO4- from radioactive effluents is extremely crucial for the purposes of nuclear disposal and environmental remediation. Herein, utilizing a facile and low-cost synthesis method, we report a pyridinium-based cationic polymer network, CPP-Cl, with impressive adsorption performance and ultrafast adsorption kinetics towards ReO4-. The structure featuring highly density of charged pyridinium units was synthesized, making it an effective adsorbent for capturing ReO4-. The material showed fast ReO4- adsorption kinetics reaching adsorption equilibrium within 30 s, an excellent capture capability of 1069.7 mg/g, and exceptional separation efficiency of 94.3% for removing 1000 ppm ReO4-. Furthermore, it possessed excellent reusability in multiple sorption/desorption trials and good uptake capacity within a widely ranging pH values. It is noteworthy that the extraction efficiency of CPP-Cl for ReO4- from simulated nuclear waste can be up to 94.2%. The favorable performance of the material in multiple tests revealed that CPP-Cl has tremendous potential as a high-efficiency sorbent for capturing 99TcO4-/ReO4- in complex nuclear associated environmental systems.
Radiation-induced Surface Modification of Silanized Silica with N-Alkyl-imidazolium Ionic Liquids and Their Applications for the Removal of ReO4− As an Analogue for TcO4−

Kangjun Xie,Zhen Dong,Maolin Zhai,Weiqun Shi,Long Zhao

DOI: https://doi.org/10.1016/j.apsusc.2021.149406

IF: 6.7

2021-01-01

Applied Surface Science

Abstract:As a radioactive fission product, Tc-99 always existed in the combined extreme conditions of super acidity, high ionic strength, and strong radiation field, which made the efficient removal of Tc a challenge. Herein, for the first time, a series of n-alkyl-imidazolium ionic liquids were grafted onto silanized silica using radiation technique. The surface and structure properties of prepared adsorbents (SiO2-MPTS-[C(n)VIm]Br) were characterized by FT-IR, TGA, XPS, BET, and SEM-EDS. Subsequently, their adsorption properties for ReO4- (a nonradioactive surrogate of TcO4-) were studied in detail. These adsorbents exhibited an adsorption capacity of approximately 190 mg g(-1) for ReO4-. It was found that adsorbents with longer alkyl chains showed better selectivity against ReO4- under the conditions of strong acids and a large excess of competitive ions. Column experiments indicated that these adsorbents could be recycled 10 times with negligible capacity loss. In addition, their adsorption performance remained unchanged after 800 kGy radiation. The column experiments of treating simulated radioactive wastewater proved that SiO2-MPTS-[C(n)VIm]Br was promising for selective separation of TcO4-/ReO4- from a variety of fission products. Lastly, XPS and FT-IR analysis confirmed that the adsorption mechanism was based on ion-exchange.
Ultrafast removal of ReO4- /TcO4- by radiation-induced grafting of imidazole ionic liquid on alkylated nano-silica microspheres

Nan Wang,Manman Zhang,Zhen Dong,Lifang Peng,Maolin Zhai,Long Zhao

DOI: https://doi.org/10.1016/j.radphyschem.2023.110950

IF: 2.776

2023-01-01

Radiation Physics and Chemistry

Abstract:In this study, two different alkylated nano-silicas were synthesized from in-situ growth and post-modification method respectively, and the 1-vinyl-3-ethylimidazolium bromide ([C(2)VIm]Br) was grafted onto them by radiation-induced grafting technique to fabricate nano-silica based adsorbents for ReO4-/TcO4- removal. The charged imidazolium moieties were controllably immobilized onto the nano-size substates by adjusting the radiation dose and monomer concentration, and the resulting adsorbents (S(P)-Si-MPTS-IL) were characterized by FTIR, SEM, EA and TGA. Subsequently, their adsorption properties for ReO4- were systematically studied in batch adsorption experiments. Combining the advantages of both nano-silica and ionic liquid, the prepared adsorbents exhibited ultrafast uptake (within 1min), high selectivity, and good cyclic stability (5 cycles, 95% retention) against ReO4-. Besides, they showed excellent radiation resistance and the adsorption properties were basically unchanged after 1200 kGy. Finally, FTIR and XPS analysis confirmed that the mechanism of adsorption process was ion exchange. This study laid a foundation for the synthesis and application of novel nano-silica adsorbent for ReO4-/TcO4-.
Cascade adsorption of methyl iodine and pertechnetate through residual activation on Pyridine-Containing conjugated microporous polymers

Meiyun Xu,Fulong Chen,Qingling He,Zhe Zhao,Peng Liu,Lei Zhou,Ziyu Wang,Daoben Hua

DOI: https://doi.org/10.1016/j.seppur.2023.123889

IF: 8.6

2023-04-28

Separation and Purification Technology

Abstract:Radioiodine species and TcO 4 − are the main fission products in nuclear waste with superior environmental fluidity, which may cause large-scale environmental pollution and hazards. Herein, we propose a strategy of cascade adsorption for the independent and sequential separation of radioiodine species (I 2 and CH 3 I) and TcO 4 − through residual activation on a pyridine-containing conjugated microporous polymer (NCMP). NCMP can selectively capture I 2 (2.71 g/g) and CH 3 I (1.32 g/g) at 90 °C from the atmosphere with H 2 O or VOCs. After a simple activation, the spent NCMP can be reutilized for the efficient adsorption of ReO 4 − (TcO 4 − ) with a superior adsorption capacity up to 784.4 mg/g. It also exhibits excellent selectivity and good regeneration performance. Impressively, it can effectively separate ReO 4 − from strongly acidic solutions (3 M HNO 3 ). This work demonstrates that cascade adsorption is a new concept for adsorbent design in adsorption and separation fields.

engineering, chemical
Radiation synthesis of binary poly(ionic liquid) functionalized silica-based materials for selective adsorption of ReO4- as analogue of TcO4- from simulated radioactive wastewater

Zhen Dong,Na Zhang,Manman Zhang,Miao Yang,Qiburi Bao,Long Zhao

DOI: https://doi.org/10.1039/d3nj00293d

IF: 3.3

2023-04-07

New Journal of Chemistry

Abstract:Pertechnetate (TcO4-) would cause long-term potential radioactive hazard to ecological environment, so it is an urgent issue to selectively separate TcO4- from radioactive wastewater. In this work, we firstly developed a series of binary ionic liquids functionalized silica (SiO2-g-PC2-CnvimBr) by simultaneously radiation grafting of hydrophilic ionic liquid 1-vinyl-3-ethylimidazole bromide ([C2VIm]Br) and hydrophobic ionic liquid 1-vinyl-3-alkylimidazolium ([CnVIm]Br, n = 4, 6, 8, 12) onto silica for the removal of ReO4- as analogue of TcO4-, single ionic liquid functionalized silica (SiO2-g-PC2vimBr) was also synthesized for comparison. The effect of absorbed dose and RAFT content on grafting yield were investigated. The grafting yield (GY) increased with increasing of absorbed dose, and decreasing of RAFT content. SiO2-g-PC2-CnvimBr showed excellent acid and irradiation resistance, the adsorption efficiency was still more than 90% after soaking in acid solution for 3 months or after being irradiated at 1000 kGy. SiO2-g-PC2-CnvimBr presented superior selectivity for ReO4- over SiO2-g-PC2vimBr. Furthermore, the continuous uptake of ReO4- using SiO2-g-PC2-CnvimBr with varying alkyl chain length of hydrophobic imidazolium were investigated and compared in the simulation radioactive wastewater. It was found that their relative column adsorption capacity and selectivity increased with increasing alkyl chain length of hydrophobic imidazolium. In addition, SiO2-g-PC2-C8vimBr displayed excellent reusability, the adsorption capacity has not changed and the desorption efficiency could reach 97% in the flow-through column cycle experiment. On the basis of experiment results, SiO2-g-PC2-CnvimBr was promising for continuous separation of TcO4-/ReO4- in practical application of radioactive wastewater and TcO4- contaminated groundwater.

chemistry, multidisciplinary
A novel quaternary phosphonium modified hierarchically macro/mesoporous silica synthesized by radiation with high selectivity for adsorption of Perrhenate

ZHONG Shouchao,LI Xingxiao,WANG Yue,HAN Dong,PENG Jing,HAO Yan,ZHAO Long,LI Jiuqiang,ZHAI Maolin

DOI: https://doi.org/10.11889/j.1000-3436.2021.rrj.39.061001

2021-01-01

Journal of Radiation Research and Radiation Processing

Abstract:Hierarchically porous silica was alkylated with trimethylchlorosilane, and a novel quaternary phosphonium modified hierarchically porous silica (HPS-C-P) was prepared by radiation-induced grafting of quaternary phosphonium. Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and specific surface area (BET) analysis results indicated that alkyl and quaternary phosphonium groups were uniformly grafted on the surface of hierarchically porous silica. It was found that the adsorption of HPS-C-P for ReO4- could reach equilibrium within 4 min, and the adsorption capacity was 140.5 mg/g, which was higher than that of hierarchically porous silica modified with quaternary phosphonium by a chemical method (74.4 mg/g). The maximum separation factor (SF) of HPS-C-P relative to NO3-, SO42-, Cl-, CO32-- and PO43- toward ReO4- could reach 159, 827, 557, 681, 1 905, which was higher than those of most recently reported adsorbents. Moreover, HPS-C-P exhibited high radiation resistance and cyclic adsorption performance. FTIR spectroscopy and XPS analysis results showed that ReO4- was adsorbed by HPS-C-P through the ion exchange mechanism.
Radiation Grafting of 1-Vinyl-3-benzylimidazolium Chloride Onto Silanized Silica with Different Pore Structures for the Removal of ReO4− As an Analogue for TcO4−

Xie Kangjun,Hua Rong,Dong Zhen,Wang Nan,Zhang Manman,Qi Wei,Zhai Maolin,Yang Jun,Zhao Long

DOI: https://doi.org/10.1007/s10967-021-08135-7

2022-01-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:Selective adsorption of TcO4− from radioactive waste is important for the nuclear industry. In this work, three 1-vinyl-3 benzylimidazole chloride modified mesoporous silica bearing different pore volumes and specific surface areas were synthesized using radiation grafting. The effect of pore structure on the adsorption properties of the three adsorbents were studied. The adsorbents with bigger specific surface area and pore volume were conducive to ReO4− adsorption in terms of both adsorption rate and capacity. The prepared adsorbents displayed good radiation resistance under gamma rays in dry or wet conditions, and they could selectively remove ReO4− from simulated Hanford wastewater in column experiments.
Radiation synthesis of ionic liquid–functionalized silica-based adsorbents: a preliminary investigation on its application for removal of ReO4− as an analog for TcO4−

Kangjun Xie,Zhen Dong,Long Zhao

DOI: https://doi.org/10.1007/s11356-020-12078-z

IF: 5.8

2021-01-05

Environmental Science and Pollution Research

Abstract:The decontamination of radioactive TcO4− from nuclear wastes is becoming increasingly crucial for spent nuclear fuel reprocessing and environmental remediation. In this work, a series of ionic liquid–immobilized silica-based adsorbents (SVIL-Cn, n = 1, 4, 8) were newly synthesized using the radiation-induced grafting of 4-vinylbenzyl chloride onto silanized silica and subsequent functionalization with 1-methylimidazole, 1-butylimidazole, or 1-octylimidazole. The synthesis conditions such as the solvent, absorbed dose, and monomer concentration were investigated in detail, and the resulting adsorbents were characterized by elemental analysis, FT-IR, SEM, and TGA. In batch experiments, the adsorbents exhibited a high ReO4− (a nonradioactive surrogate of TcO4−) removal efficiency over a wide pH range (3 ~ 8), and SVIL-C1 showed a maximum adsorption capacity of 70.62 mg g−1 towards ReO4−. In addition, their adsorption performance barely changed after 800 kGy radiation. The column experiments for treating simulated radioactive wastewater showed that the SVIL-Cn adsorbents could selectively separate TcO4−/ReO4− from a variety of fission products, and they could be recycled four times with negligible capacity loss. Lastly, XPS and FT-IR analysis confirmed that the adsorption proceeded via an ion-exchange mechanism. The results showed that these adsorbents are suitable for the efficient removal of TcO4−/ReO4− from radioactive wastewater with complex compositions.Graphical abstract

environmental sciences
Separation of ReO 4 − /TcO 4 − from simulated radioactive waste liquid by a novel series of anion exchange resins

Yiwei Huang,Xinlong Chen,Yinglin Shen,Xiaomin Li,Xupeng Zhi,Peng Liu,Meiying Liu,Bin Liu

DOI: https://doi.org/10.1515/ract-2023-0261

2024-03-29

Radiochimica Acta

Abstract:Selective removal of 99 TcO4 − from radioactive wastewater is a challenging but significant task, which benefits spent fuel reprocessing and radioactive-waste leakage treatment. This work introduces the performance of adsorption ReO 4 − using a series of novel anion exchange resins, namely MAPE-1, MAPE-2, MAPE-3, and MAGD-1, impregnated with functionalized ionic liquids as active sites. They exhibit a high selectivity towards TcO4 − /ReO4 − , in a wide pH range of pH 5–11 for ReO4 − /TcO4 − adsorption. Among these resins, MAPE-1 has the best adsorption performance for ReO 4 − , with a maximum adsorption capacity of 202.4 mg/g and a high distribution ratio K d of 6.2 × 106 mL/g at pH 7. The adsorption mechanism involves anion exchange between functionalized ionic liquids and TcO4 − /ReO4 − , which is supported by X-ray energy dispersive spectroscopy (EDS) and Fourier Transform Infrared spectroscopy (FT-IR) analyses. In addition, X-ray photoelectron spectroscopy (XPS) further illustrates the interaction between the resin and perrhenate.

chemistry, inorganic & nuclear,nuclear science & technology
Efficient Removal of Anionic Radioactive Pollutant from Water Using Ordered Urea-Functionalized Mesoporous Polymeric Nanoparticle

Jian Shen,Wei Chai,Kaixuan Wang,Fang Zhang

DOI: https://doi.org/10.1021/acsami.7b04325

2017-07-12

Abstract:A urea-functionalized ordered mesoporous polymeric nanoparticle for removing the perrhenate anion ReO4- as the surrogate of the particularly intractable anion radioactive pollutant TcO4- was demonstrated in the present study. This nanomaterial (denoted as urea-MPN) was produced for the first time by a surfactant-directed urea-phenol-formaldehyde resol oligomers self-assembly protocol under hydrothermal condition. The obtained urea-MPN possessed the uniform nanosized spherical morphology with a 3D interconnected ordered cubic mesoporous structure. Also, the urea functional groups were succefully embedded in the polymer framework without the alteration of the molecular configuration. Meanwhile, it exhibited excellent β radiation resistance up to 200 kGy dose. We employed the perrhenate anion ReO4- to test its potential for the removal of anionic radioactive pollutant TcO4- from water. Interestingly, the optimized urea-MPN nanocomposite achieved the high removal efficiency at a low concentration of 0.25 mM within a short contact time of 30 min. The control experimental results revealed that the short nanoscale pore channels and the hydrophobic mesopore surface facilitated the hydrogen-bonding interaction between the charge-diffuse ReO4- tetrahedral oxoanion and the urea moieties in the framework of urea-MPN, accounting for the rapid and effective removal performance in pure water. Importantly, it can selectively capture ReO4- in the presence of different competitive anions including NO3-, CO32-, SO42-, and PO43-. This attractive capability of this unique nanosized mesoporous polymeric sorbent will pave the way for the diverse applications in the decontamination of nuclear wastes in a more economical and sustainable manner.
Machine-Learning-Assisted Material Discovery of Pyridine-Based Polymers for Efficient Removal of ReO4

Ling Yuan,Haolin Guo,Qinyang Li,Han Zhang,Mujian Xu,Weiming Zhang,Yanyang Zhang,Ming Hua,Lu Lv,Bingcai Pan

DOI: https://doi.org/10.1021/acs.est.4c03686

2024-08-12

Abstract:Efficient capture of 99TcO4- is the focus in nuclear waste management. For laboratory operation, ReO4- is used as a nonradioactive alternative to 99TcO4- to develop high-performance adsorbents for the treatment. However, the traditional design of new adsorbents is primarily driven by the chemical intuition of scientists and experimental methods, which are inefficient. Herein, a machine learning (ML)-assisted material genome approach (MGA) is proposed to precisely design high-efficiency adsorbents. ML models were developed to accurately predict adsorption capacity from adsorbent structures and solvent environment, thus predicting and screening the 2450 virtual pyridine polymers obtained by MGA, and it was found that halogen functionalization can enhance its adsorption efficiency. Two halogenated functional pyridine polymers (F-C-CTF and Cl-C-CTF) predicted by this approach were synthesized that exhibited excellent acid/alkali resistance and selectivity for ReO4-. The adsorption capacity reached 940.13 (F-C-CTF) and 732.74 mg g-1 (Cl-C-CTF), which were better than those of most reported adsorbents. The adsorption mechanism is comprehensively elucidated by experiment and density functional theory calculation, showing that halogen functionalization can form halogen-bonding interactions with 99TcO4-, which further justified the theoretical plausibility of the screening results. Our findings demonstrate that ML-assisted MGA represents a paradigm shift for next-generation adsorbent design.
Rationally designed pyridinium cationic polymeric network for effective TcO4−/ReO4− remediation

Run-Han Yan,Wei-Rong Cui,Wei Jiang,Juan Huang,Ru-Ping Liang,Jian-Ding Qiu

DOI: https://doi.org/10.1016/j.ces.2022.118403

IF: 4.7

2023-03-01

Chemical Engineering Science

Abstract:The development of highly efficient and reliable adsorbent towards radiactive 99TcO4 − is of great significance. Here, a covalent polymeric network (Py-CPN) based on pyridinium was rationally designed and synthesized through nucleophilic substitution reaction between 3D building unit tetrakis(4-(bromomethyl) phenyl) methane (TBPM) and 1,3,6,8-tetra(pyridin-4-yl) pyrene (TPyPy). Due to the rigidity and shape-persistence of tetrahedral unit of TBPM, which benefited rapid ion transportation across the polymeric network, Py-CPN provided high adsorption capacity and fast kinetics towards ReO4 − removal. Owing to the introduction of highly hydrophobic and largely conjugated monomer TPyPy, excellent selectivity towards various coexisting anions was achieved. Moreover, the sorption ability of Py-CPN remained stable over a wide range of pH values, including 3 M HNO3 solution and simulated Hanford LAW off-gas recycle wastes. Py-CPN also exhibited excellent recyclability for at least four cycles. Overall, this work provided a new strategy for constructing high-performance polymeric materials for sustainable development of environment protection.

engineering, chemical

The evidence of gene duplication for S-form NADP-linked isocitrate dehydrogenase in carp and goldfish

Effective Removal of Cesium by New Functionalized 1,3-Alternate Calixcrown Materials Immobilized on a Silica Carrier

Adsorption of Cesium and Some Typical Coexistent Elements Onto a Modified Macroporous Silica-Based Supramolecular Recognition Material.

Preparation of A Novel Macroporous Silica-Based Diglycolamide Derivative-Impregnated Polymeric Composite and Its Adsorption Mechanism for Rare Earth Metal Ions

Preparation of a Novel Macroporous Silica-Based 2,6-Bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine Impregnated Polymeric Composite and Its Application in the Adsorption for Trivalent Rare Earths

Impregnation synthesis of a novel macroporous silica-based TODGA polymeric composite and its application in the adsorption of rare earths in nitric acid solution containing diethylenetriaminepentaacetic acid

Radiation Syntheses and Performance of Novel Hierarchically Macro-/Mesoporous Silica Adsorbents with Quaternary Phosphonium for the High Selective Removal of Perrhenate

Impregnation synthesis of a novel macroporous silica-based crown ether polymeric material modified by 1-dodecanol and its adsorption for strontium and some coexistent metals

Dication-accelerated anion transport inside micropores for the rapid decontamination of pertechnetate

Efficient removal of perrhenate/pertechnetate by a pyridinium-based porous polymer

Radiation-induced Surface Modification of Silanized Silica with N-Alkyl-imidazolium Ionic Liquids and Their Applications for the Removal of ReO4− As an Analogue for TcO4−

Ultrafast removal of ReO4- /TcO4- by radiation-induced grafting of imidazole ionic liquid on alkylated nano-silica microspheres

Cascade adsorption of methyl iodine and pertechnetate through residual activation on Pyridine-Containing conjugated microporous polymers

Radiation synthesis of binary poly(ionic liquid) functionalized silica-based materials for selective adsorption of ReO4- as analogue of TcO4- from simulated radioactive wastewater

A novel quaternary phosphonium modified hierarchically macro/mesoporous silica synthesized by radiation with high selectivity for adsorption of Perrhenate

Radiation Grafting of 1-Vinyl-3-benzylimidazolium Chloride Onto Silanized Silica with Different Pore Structures for the Removal of ReO4− As an Analogue for TcO4−

Radiation synthesis of ionic liquid–functionalized silica-based adsorbents: a preliminary investigation on its application for removal of ReO4− as an analog for TcO4−

Separation of ReO 4 − /TcO 4 − from simulated radioactive waste liquid by a novel series of anion exchange resins

Efficient Removal of Anionic Radioactive Pollutant from Water Using Ordered Urea-Functionalized Mesoporous Polymeric Nanoparticle

Machine-Learning-Assisted Material Discovery of Pyridine-Based Polymers for Efficient Removal of ReO4

Rationally designed pyridinium cationic polymeric network for effective TcO4−/ReO4− remediation