Abstract:The formation of carbon nanofibers (CNF) and carbon nanotubes (CNT) can be attributed to the ability of NiO to decompose hydrocarbons, mainly methane (CH4). This process includes the activation and the CH4 decomposition in the crystallographic Ni (100) and Ni (110) planes, and the CNF germination in the Ni (111) plane [1]. According to experimental studies, the addition of Nb2O5 in these catalysts can increase the intensity of the active planes, favoring the CH4 decomposition [2]. In this context, the goal of this work is to investigate, through theoretical calculations, the properties of the material after doping with Nb. All calculations were performed using the ADFBAND package, with application of the DFT method at the GGA-PBE level and TZP basis set. The structures of the pure and niobium doped NiO catalysts were indexed in the (100), (110) and (111) planes. The addition of Nb conferred greater stability to the compound in all analyzed planes. This variation was of 186.15, 186.20 and 167.70 kcal/mol to lower energy values, in the (100), (110) and (111) planes, respectively. For the adsorption study, the methane molecule was optimized in contact with the (111) plane of the NiO and NiO/Nb catalysts at different distances. The methane adsorption begins to take place on the surfaces at a distance of approximately 4 Ǻ and reaches the minimum energy at 3 Ǻ. However, on the Nb doped catalyst, the equilibrium geometry occurs at an adsorption energy of 9.92 kcal/mol larger than on pure NiO. As for the proposed mechanism, the study suggests that the carbon deposition on the catalyst starts with adsorption, followed by a series of steps of methane dissociation on the metal surface, leading to the formation of several adsorbed species and, finally, carbon and hydrogen. From now on, it takes place the growth of the crystalline carbon. The potential energy surface of the dissociation catalyzed by NiO, in black, and by NiO/Nb, in red, is then obtained. 12 a 17/Nov, 2017, Águas de Lindóia/SP, Brasil It is found that the CH4 dissociation into carbon and hydrogen by the modified surface is favored thermodynamically with respect to the pure catalyst at all stages. This behavior may be related to the existence of a synergistic effect between Ni and Nb, which results in improved catalytic performance of the modified structure throughout the dissociation. Thus, the theoretical results indicate that the modification of the NiO structure caused by the presence of Nb can bring about improvements in the activity of this material in methane decomposition reactions and subsequent formation of CNF and CNT. Key-words: DFT, Nickel oxide, Methane decomposition, CNF, CNT. Support: This work has been supported by FAPEMIG and FAPESP. References: [1] K. P. De Jong; J. W. Geus Catal. Rev.-Sci Eng. 2000, 42, 481 [2] Li, J. Z.; Lu, G. X.; Li, K. Chemistry Latters 2004, 33, 652.

Non-oxidative Coupling of Methane: N-type Doping of Niobium Single Atoms in TiO2 -SiO2 Induces Electron Localization

Striking Doping Effects on Thermal Methane Activation Mediated by the Heteronuclear Metal Oxides [<i>X</i>AlO<sub>4</sub>]<sup>.+</sup>(<i>X</i>=V, Nb, and Ta)

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

High-performance Photocatalytic Nonoxidative Conversion of Methane to Ethane and Hydrogen by Heteroatoms-Engineered TiO2

Electron-Delocalization-Stabilized Photoelectrocatalytic Coupling of Methane by NiO-Polyoxometalate Sub-1 Nm Heterostructures.

Photocatalytic methane oxidation over a TiO2/SiNWs p-n junction catalyst at room temperature

Atomically Dispersed Nickel Anchored on a Nitrogen‐Doped Carbon/TiO2 Composite for Efficient and Selective Photocatalytic CH4 Oxidation to Oxygenates

High-performance photocatalytic nonoxidative conversion of methane to ethane and hydrogen by heteroatoms-engineered TiO 2

Cu and Si Co-Doping on TiO2 Nanosheets to Modulate Reactive Oxygen Species for Efficient Photocatalytic Methane Conversion.

Atomically Dispersed Nickel Anchored on a Nitrogen‐Doped Carbon/TiO2Composite for Efficient and Selective Photocatalytic CH4Oxidation to Oxygenates

NiO@Ni nanoparticles embedded in N-doped carbon for efficient photothermal CO2 methanation coupled with H2O splitting

High‐performance Mn2O3‐Na2WO4/SiO2‐TiO2 catalyst for the oxidative coupling of methane: TiO2‐modulated MnTiO3 formation for enhanced low‐temperature performance

Boosting photo-thermal co-catalysis CO2 methanation by tuning interface electron transfer via Mott-Schottky heterojunction effect

Theoretical study of the methane decomposition catalyzed by niobium doped nickel oxide : thermodynamic profile and reaction mechanism

High photocatalytic yield in the non-oxidative coupling of methane using a Pd-TiO2 nanomembrane gas flow-through reactor

Adjacent Reaction Sites of Atomic Mn2O3 and Oxygen Vacancies Facilitate CO2 Activation for Enhanced CH4 Production on TiO2-Supported Nickel-Hydroxide Nanoparticles

Oxidative coupling of methane—comparisons of MnTiO3–Na2WO4 and MnOx–TiO2–Na2WO4 catalysts on different silica supports

Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol

Effective CO2 photoreduction to methane over Bi2MoO6/ Ni, N co-doped TiO2 nano-photocatalyst

Enhanced performance of chemical looping methane oxidative coupling by the synergistic effect of TiO2 doped Na2WO4/Mn2O3/SiO2 oxygen carriers

Synchronous construction of Cu and Ni single-atom sites in ordered porous TiO2 for enhanced photo-conversion of CO2 and H2O to methane