Abstract:Non-enzymatic Screen-Printed Chemiresistive Interdigitated Electrodes (SPCIE) were designed and fabricated using a low-cost screen-printing method for detection of the glucose. The Interdigitated Electrodes (IDE) pattern was printed using conductive graphene ink on the glossy surface of the photo paper. The proposed glossy photo paper-based SPCIE are functionalized with Multi-walled Carbon Nanotubes-Zinc Oxide (MWCNTs-ZnO) nanofibers to create the chemiresistive matrix. Further, to bind these nanofibers with the graphene electrode surface, we have used the green synthesized silver nanoparticles (AgNPs) with Banana Flower Stem Fluid (BFSF) as a binder solution. AgNPs with BFSF form the Conductive Porous Natural Binder Layer (CPNBL). It does not allow to increase the resistivity of the deposited material on graphene electrodes and also keeps the nanofibers intact with paper-based SPCIE. The synthesized material of MWCNT-ZnO nanofibers and green synthesized AgNPs with BFSF as a binder were characterized by Ultraviolet-visible spectroscopy (UV-Vis), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), and Fourier-Transform Infrared Spectroscopy (FTIR). The amperometric measurements were performed on the proposed SPCIE sensor to detect the glucose sample directly. The innovative paper-based SPCIE glucose sensor exhibits a linear corelation between current measurements and glucose concentration in the range between 45.22 μM – 20 mM, with a regression coefficient (R2) of 0.9902 and a lower Limit of Detection (LoD) of 45.22 μM (n=5). The sensitivity of the developed SPCIE sensor was 2178.57 μAmM-1cm-2, and the sensor's response time determined was approximately equal to 18 seconds. The proposed sensor was also tested for real blood serum sample, and Relative Standard Deviation (RSD) was found equal to 2.95%.

Developing an integrated microfluidic and miniaturized electrochemical biosensor for point of care determination of glucose in human plasma samples

Glucose biosensor based on open-source wireless microfluidic potentiostat

In-Channel Modification of Biosensor Electrodes Integrated on A Polycarbonate Microfluidic Chip for Micro Flow-Injection Amperometric Determination of Glucose

A Conductive Hydrogel Microneedle-Based Assay Integrating PEDOT:PSS and Ag-Pt Nanoparticles for Real-Time, Enzyme-Less, and Electrochemical Sensing of Glucose

A novel electrochemical microneedle sensor for highly sensitive real time monitoring of glucose

Using a Glucose Meter to Quantitatively Detect Disease Biomarkers Through a Universal Nanozyme Integrated Lateral Fluidic Sensing Platform.

Facile and Low-Cost Sensor System for Exploration of Non-Invasive Glucose Measurement

An efficient biosensor using a functionalized microneedle of Cu2O-based CoCu-LDH for glucose detection

Development of an Effective and Economic Biosensor for Diabetic Blood Monitoring Based on MWCNTs, Artificial Redox Mediator Ferrocene, Nafion Polymer and a Local Extracted and Purified Glucose Oxidase Enzyme from Penicillium Notatum F-158 Fungus

Design and Fabrication of Capillary-Driven Flow Device for Point-Of-Care Diagnostics

Non-enzymatic glucose detection with Screen-Printed Chemiresistive sensor using green synthesised silver nanoparticle and multi-walled carbon nanotubes-zinc oxide nanofibers

Mobile-assisted diagnostic biosensor for point-of-care glucose detection in real human samples with rapid response and long-live stability

A Low-Cost Amperometric Glucose Sensor Based on PCB Technology

Self-assembled perylene-tetracarboxylic acid/multi-walled carbon nanotube adducts based modification of screen-printed interface for efficient enzyme immobilization towards glucose biosensing

Wireless Non-Enzymatic Glucose Sensing System with Pt-Ni Nanocomposite and Silica Nanoporous Membrane Modified Electrodes for Different Disease Monitoring

Chronoampermetric detection of enzymatic glucose sensor based on doped polyindole/MWCNT composites modified onto screen-printed carbon electrode as portable sensing device for diabetes

On-chip Highly Sensitive Saliva Glucose Sensing Using Multilayer Films Composed of Single-Walled Carbon Nanotubes, Gold Nanoparticles, and Glucose Oxidase

NFC-Enabled Photothermal-Based Microfluidic Paper Analytical Device for Glucose Detection

Liquid Metal Ink Enabled Rapid Prototyping of Electrochemical Sensor for Wireless Glucose Detection on the Platform of Mobile Phone

Glucose Oxidase/Nano-ZnO/Thin Film Deposit FTO as an Innovative Clinical Transducer: A Sensitive Glucose Biosensor

Portable impedance measurement device for sweat based glucose detection