Abstract:Several types of standardized laboratory leaching tests have been developed during the past few decades to evaluate the leaching behaviour of waste materials as a function of different parameters, such as the pH of the eluate and the liquid to solid ratio. However, the link between the results of these tests and leaching data collected from the field (e.g. in disposal or reuse scenarios) is not always straightforward. In this work, we compare data obtained from an on-going large scale field trial, in which municipal solid waste incineration bottom ash is being tested as road sub-base material, with the results obtained from percolation column and pH-dependence laboratory leaching tests carried out on the bottom ash at the beginning of the test. The comparisons reported in this paper show that for soluble substances (e.g. Cl, K and SO4), percolation column tests can provide a good indication of the release expected in the field with deviations usually within a factor of 3. For metals characterized by a solubility-controlled release, i.e. that depends more on eluate pH than the liquid to solid ratio applied, the results of pH-dependence tests describe more accurately the eluate concentration trends observed in the field with deviations that in most cases (around 80%) are within one order of magnitude (see e.g. Al and Cd). The differences between field and lab-scale data might be in part ascribed to the occurrence in the field of weathering reactions (e.g. carbonation) but also to microbial decomposition of organic matter that modifying leachate pH affect the solubility of several constituents (e.g. Ca, Ba and Cr). Besides, weathering reactions can result in enhanced adsorption of fulvic acids to iron/aluminum (hydr)oxides, leading to a decrease in the leaching of fulvic acids and hence of elements such as Cu, Ni and Pb that strongly depend on DOC leaching. Overall, this comparison shows that percolation column tests and pH-dependence tests can represent a reliable screening tool to derive data that could be employed in risk-based analysis or life cycle assessment (LCA) frameworks for evaluating potential environmental impacts deriving from specific disposal/reuse options for waste materials.

Demonstration of the use of test results from the Leaching Environmental Assessment Framework (LEAF) to develop screening-level leaching assessments

Identification of Heavy Metal Leaching Patterns in Municipal Solid Waste Incineration Fly Ash Based on an Explainable Machine Learning Approach.

From leaching data to release estimates: Screening and scenario assessments of electric arc furnace (EAF) slag under unencapsulated use

Leaching behaviour of incineration bottom ash in a reuse scenario: 12years-field data vs. lab test results

Field Test on Electro-Osmosis in a Heavy Metal Contaminated Soil: Electrokinetic Remediation and Reinforcement of the Soil

Health Risk Assessment of Ecological Cement in Feed Water Systems

Use of ecotoxicity test and ecoscores to improve the management of polluted soils: case of a secondary lead smelter plant

The leaching behavior of heavy metal from contaminated mining soil: The effect of rainfall conditions and the impact on surrounding agricultural lands

Insights Into Ferric Leaching Of Low Grade Metal Sulfide-Containing Ores In An Unsaturated Ore Bed Using X-Ray Computed Tomography

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Ecotoxicological assessment of waste foundry sands and the application of different classification systems

Study on the Remediation of Cadmium/Mercury Contaminated Soil by Leaching: Effectiveness, Conditions, and Ecological Risks

The use of a four-stage sequential leaching procedure and the corresponding one-phase extractions for risk assessment of potential harmful substances in waste rock utilized in railway ballast

The geochemical behaviors of potentially toxic elements in a typical lead/zinc (Pb/Zn) smelter contaminated soil with quantitative mineralogical assessments

Trace Metal Leachability of Land-Disposed Dredged Sediments

Soil stabilisation using AMD sludge, compost and lignite: TCLP leachability and continuous acid leaching

Demonstration of a landscape-scale approach for predicting acute copper toxicity to larval fathead minnows (Pimephales promelas) in surface waters

Leaching behavior of aluminum, copper, iron and zinc from cement activated fly ash and slag stabilized soils

Geochemical fractionation and potential release behaviour of heavy metals in lead‒zinc smelting soils

Preparation of lightweight aggregates using waste soil contaminated with heavy metals: Physical properties, microstructure and verification of heavy metal solidification through different leaching tests

Study on the remediation of uranium-contaminated soils by compound leaching: Screening of leaching agents and a pilot-scale application