[Lipid metabolism disorder of the rat liver from parenterally administered deoxycholate].

H. Schriewer,D. von Bassewitz,H. Rauen

DOI: https://doi.org/10.1007/BF01484142

Klinische Wochenschrift

Abstract:

What problem does this paper attempt to address?

Guided bone regeneration for peri‐implant augmentation: A retrospective study comparing two surgical techniques with a mean follow‐up of 26 months

Yeyu Liu,Dongping Lan,Jiayu Gao,Chen Deng,Yi Man

DOI: https://doi.org/10.1111/clr.14254

2024-03-12

Clinical Oral Implants Research

Abstract:Objectives To introduce a modified guided bone regeneration (GBR) technique using intact periosteum and deproteinized bovine bone mineral (DBBM) for peri‐implant augmentation and compare the clinical outcomes with those of conventional GBR. Materials and Methods Patients who received peri‐implant augmentation in posterior sites between 2015 and 2021 were reviewed in this study. Group A was treated with a modified GBR technique, and Group B was treated with conventional GBR. For group comparison, propensity score matching was performed with a sensitivity analysis. The implant survival rate, dimensional changes in hard tissue, marginal bone loss (MBL), and peri‐implant parameters were evaluated. Results In total, 114 implants from 98 patients were included. The implant survival rates were 95.74% in Group A and 95.00% in Group B during the follow‐up period. At 6 months, the median horizontal thickness was recorded at 0.87 mm (IQ1–IQ3 = 0.00–1.75 mm) in Group A, exhibiting a relatively lower value compared to the corresponding measurement of 0.98 mm (IQ1–IQ3 = 0.00–1.89 mm) in Group B (p = .937). Vertical height displayed no statistically significant intergroup difference between the two groups (p = .758). The mean follow‐up period was 25.83 ± 12.93 months after loading in Group A and 27.47 ± 21.29 months in Group B (p = .761). MBL and peri‐implant parameters were comparable between the two groups. Conclusions Within the limitations of this study, the modified GBR technique using intact periosteum and DBBM grafting might be a viable alternative to correct bone defects around implants in molar and premolar sites.

engineering, biomedical,dentistry, oral surgery & medicine
Evaluation of Hard Tissue 3-Dimensional Stability Around Single Implants Placed with Guided Bone Regeneration in the Anterior Maxilla: A 3-Year Retrospective Study.

Haida Chen,Tianyi Gu,Haiyan Lai,Xinhua Gu

DOI: https://doi.org/10.1016/j.prosdent.2021.02.015

IF: 4.148

2021-01-01

Journal of Prosthetic Dentistry

Abstract:Statement of problem. Guided bone regeneration (GBR) is widely used to reconstruct peri-implant bone defects in the esthetic zone. However, the dimensional stability of this bone-biomaterial composite is not fully understood.Purpose. The primary aim was to evaluate the hard tissue 3-dimensional (3D) stability around single implants placed with simultaneous GBR by using deproteinized bovine bone mineral (DBBM) in the anterior maxilla and explore possible influencing factors.Material and methods. The records of patients who had received implants in the anterior maxilla from January 2015 to March 2016 were reviewed retrospectively. The change in volume and thickness of the facial hard tissue were analyzed. To explore possible influencing factors, the thickness and surface area of facial graft were measured, and the time point at which implants were placed and the healing protocol were recorded. Secondary outcome measures were peri-implant marginal bone loss, bleeding on probing (BOP), and pink esthetic score (PES). Statistical analysis was conducted by using the Student t test, Mann-Whitney U test, Kruskal-Wallis test, or generalized estimating equation analysis (a=.05).Results. Fifty-five participants were included in this study, and no implants had been lost after 3 years. BOP was present in 10 (18.2%) participants. The mean +/- standard deviation PES of all implants for this study was 11.0 +/- 2.1. The mean +/- standard deviation percentage of residual hard tissue volume was 36.9 +/- 23.5%, with a significant difference found between time points before 9 months (P<.05). Type 3 implant placement (OR=1.449, P=.031) was found to have a higher percentage of residual hard tissue volume. A greater reduction of the facial hard tissue thickness was observed in participants with thicker postoperative facial grafting (OR=1.463, P=.001). No statistically significant difference was found between the facial, palatal, mesial, and distal peri-implant sites in terms of marginal bone loss (P>.05). Conclusions. Although single-tooth implant placement combined with GBR using DBBM in the anterior maxilla offered satisfactory esthetic and functional outcomes after a 3-year follow-up, significant hard tissue volume and thickness reduction in grafted sites was detected, especially during the initial 9-month postoperative period. This phenomenon may be correlated with the timing of implant placement and the thickness of the facial graft. (J Prosthet Dent 2022;128:919-27)
Multiple transitions and HIV risk among orphaned Kenyan schoolgirls.

S. Mojola

DOI: https://doi.org/10.1111/J.1728-4465.2011.00262.X

2011-03-01

Studies in Family Planning

Abstract:Why are orphaned girls at particular risk of acquiring HIV infection? Using a transition-to-adulthood framework, this study employs qualitative data from Nyanza Province, Kenya, to explore pathways to HIV risk among orphaned and nonorphaned high-school girls. It shows how simultaneous processes such as leaving their parental home, negotiating financial access, and relationship transitions interact to produce disproportionate risk for orphaned girls. The role of financial provision and parental love in modifying girls' trajectories to risk are also explored. A testable theoretical model is proposed based on the qualitative findings, and policy implications are suggested.
Guided bone regeneration in implant dentistry: Basic principle, progress over 35 years, and recent research activities

Daniel Buser,Istvan Urban,Alberto Monje,Marcel F. Kunrath,Christer Dahlin

DOI: https://doi.org/10.1111/prd.12539

2024-01-10

Periodontology 2000

Abstract:Bone augmentation procedures are frequent today in implant patients, since an implant should be circumferentially anchored in bone at completion of bone healing to have a good long‐term stability. The best documented surgical technique to achieve this goal is guided bone regeneration (GBR) utilizing barrier membranes in combination with bone fillers. This clinical review paper reflects 35 years of development and progress with GBR. In the 1990s, GBR was developed by defining the indications for GBR, examining various barrier membranes, bone grafts, and bone substitutes. Complications were identified and reduced by modifications of the surgical technique. Today, the selection criteria for various surgical approaches are much better understood, in particular, in post‐extraction implant placement. In the majority of patients, biodegradable collagen membranes are used, mainly for horizontal bone augmentation, whereas bioinert PTFE membranes are preferred for vertical ridge augmentation. The leading surgeons are using a composite graft with autogenous bone chips to accelerate bone formation, in combination with a low‐substitution bone filer to better maintain the augmented bone volume over time. In addition, major efforts have been made since the millenium change to reduce surgical trauma and patient morbidity as much as possible. At the end, some open questions related to GBR are discussed.

dentistry, oral surgery & medicine
Retrospective success and survival rates of dental implants placed with simultaneous bone augmentation in partially edentulous patients

Nima Bazrafshan,Ivan Darby

DOI: https://doi.org/10.1111/clr.12185

Abstract:Aim: The aim of this study was to assess the success and survival rate of dental implants placed with simultaneous hard tissue grafting. Material and methods: All patients treated in Royal Dental Hospital of Melbourne who had implant placement with and without guided bone regeneration (GBR) procedures were identified. Seventy-three attended a follow-up appointment. These patients were examined recording probing depth, bleeding on probing, plaque accumulation and radiographic bone loss by one examiner. Clinical and radiographic findings were compared in grafted and non-grafted groups and also analysed for years in function. Results: Approximately 50% of implants were placed simultaneous guided bone regeneration technique. In the majority of cases, defects were filled by deproteinized bovine bone mineral and covered with collagen membrane. The range of time in function was 20-88 months with a mean 34.8 (±1.7). Seventy-nine per cent of the implants placed in anterior maxilla were placed with GBR, while only 18% in posterior mandible needed grafting procedure. The cumulative implant survival rates at the time of examination was 97.95% for both GBR and non-GBR group. The mean PPD, BOP, and Plaque index were not statistically significantly different in GBR vs. non-GBR groups two to seven years in function. However, bone loss is significantly less in GBR group 2-7 years after function. The overall success rate was around 90% after 2-7 years in function with the GBR group slightly less than the non-GBR group, but not statistically significant. Conclusions: For the subjects included in this retrospective study, the data demonstrate that GBR is a predictable procedure. The survival and success rates of the implants inserted with simultaneous GBR were similar, if slightly lower, to the non-grafted implants.
Diagnostic efficacy of single-pass abdominal multidetector-row CT: prospective evaluation of a low dose protocol.

L. Camera,Immacolata Liccardo,Federica Romano,R. Liuzzi,A. Rispo,M. Imbriaco,A. Testa,G. Luglio,S. De Fronzo,F. Castiglione,L. Bucci,A. Brunetti

DOI: https://doi.org/10.1259/bjr.20160612

2017-01-16

British Journal of Radiology

Abstract:OBJECTIVE To evaluate the diagnostic efficacy of single-pass contrast-enhanced multidetector CT (CE-MDCT) performed with a low-radiation high-contrast (LR-HC) dose protocol in selected patients with non-traumatic acute bowel disease. METHODS 65 (32 males, 33 females; aged 20-67 years) consecutive patients with non-traumatic acute bowel disease underwent single-pass CE-MDCT performed 70-100 s after i.v. bolus injection of a non-ionic iodinated contrast medium (CM) (370 mgI ml-1). In 46 (70%) patients with a clinical and/or ultrasonographic suspicion of inflammatory bowel disease, up to 1.2-1.4 l of a 7% polyethylene-glycol solution was orally administered 45-60 mins prior to the CT examination. Patients were then divided into two groups according to age: Group A (20-44 years; n = 34) and Group B (45-70 years; n = 31). Noise index (NI) and CM dose were selected as follows: Group A (NI = 15; 2.5 ml kg-1) and Group B (NI = 12.5; 2 ml kg-1). All patients of Group A underwent thyroid functional tests at 4-6 weeks. Final diagnoses were obtained by open (n = 12) or laparoscopic surgery (n = 4), endoscopy w/without biopsy (n = 24) and clinical (n = 19) and/or instrumental (ultrasonography) (n = 6) follow-up at 11 ± 4 months (range 6-18 mo.). Statistical analysis was performed by χ2 and Student's t-test for categorical and continuous variables, respectively. RESULTS Sensitivity and specificity were 91.3 vs 95.4% (p = 0.905) and 90.9 vs 88.8% (p = 0.998) with an overall diagnostic accuracy of 91.1 vs 93.5% (p = 0.756), whereas the radiation (in millisievert) and CM dose (in millilitre) were 7.5 ± 2.8 mSv and 155 ± 30 ml for Group A and 14.1 ± 5.3 mSv and 130 ± 24 ml for Group B (p < 0.001), respectively. No patients of Group A showed laboratory signs of thyrotoxicosis at follow-up. CONCLUSION The LR-HC has proved to be a safe and a dose-effective protocol in the evaluation of selected young patients with non-traumatic acute bowel disease. Advances in knowledge: (1) As reaching the highest diagnostic benefit to risk ratio (AHARA) appears to be the current principle of MDCT imaging, an increased amount of iodinated CM (0.7-0.9 gI ml-1) can be safely administered to young patients (<40 years) with normal thyroid and renal function to compensate for the lower image quality resulting from low-dose CT protocols performed with the standard filter back-projection algorithm. Such an approach will result in a significant reduction of the radiation dose, which could be otherwise achieved only using iterative reconstruction algorithms combined with either low tube voltage and/or low tube current protocols. (2) An optimal scan delay (Tdelay) for a venous phase caudocranial acquisition can be calculated by the following formula: Tdelay = CI + 25 - TSD, where CI is the duration of the contrast injection, 25 is the average of the sum of abdominal aortic and peak hepatic arrival times and TSD is the scan duration. With such an approach, the radiation exposure resulting from bolus tracking, albeit performed with low-dose scans, can be spared in patients with normal transit times.
Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery

John E. Davies,Rano Matta,Vanessa C. Mendes,Paulo S. Perri de Carvalho

DOI: https://doi.org/10.4161/org.6.3.12392

2010-07-01

Organogenesis

Abstract:We have developed a biodegradable composite scaffold for bone tissue engineering applications with a pore size and interconnecting macroporosity similar to those of human trabecular bone. The scaffold is fabricated by a process of particle leaching and phase inversion from poly(lactideco-glycolide) (PLGA) and two calcium phosphate (CaP) phases both of which are resorbable by osteoclasts; the first a particulate within the polymer structure and the second a thin ubiquitous coating. The 3-5 μm thick osteoconductive surface CaP abrogates the putative foreign body giant cell response to the underlying polymer, while the internal CaP phase provides dimensional stability in an otherwise highly compliant structure. The scaffold may be used as a biomaterial alone, as a carrier for cells or a three-phase drug delivery device. Due to the highly interconnected macroporosity ranging from 81% to 91%, with macropores of 0.8∼1.8 mm, and an ability to wick up blood, the scaffold acts as both a clot-retention device and an osteoconductive support for host bone growth. As a cell delivery vehicle, the scaffold can be first seeded with human mesenchymal cells which can then contribute to bone formation in orthotopic implantation sites, as we show in immune-compromised animal hosts. We have also employed this scaffold in both lithomorph and particulate forms in human patients to maintain alveolar bone height following tooth extraction, and augment alveolar bone height through standard sinus lift approaches. We provide a clinical case report of both of these applications; and we show that the scaffold served to regenerate sufficient bone tissue in the wound site to provide a sound foundation for dental implant placement. At the time of writing, such implants have been in occlusal function for periods of up to 3 years in sites regenerated through the use of the scaffold.
Stage-specifically expressed genes of Angiostrongylus cantonensis: identification by differential display.

G. Joshua,C. Hsieh

DOI: https://doi.org/10.1016/0166-6851(95)00068-C

1995-05-01

Abstract:
A synthetic bioactive resorbable graft for predictable implant reconstruction: part one

Maurice Valen,Scott D Ganz

DOI: https://doi.org/10.1563/1548-1336(2002)028<0167:ASBRGF>2.3.CO;2

Abstract:Animal studies were conducted to evaluate the cell response and chemical potentiality of a synthetic bioactive resorbable graft (SBRG) made of nonceramic cluster particulate of low-temperature HA material. The study evaluated bone-bridging of the SBRG particulates in 1-mm wide implant channels of 5 x 8 mm long roughened titanium interface in 6 dogs and compared results to the same implant channels left empty as controls at 6- and 12-week intervals. Resorption rate capacity and cell response were evaluated with an assessment of the chemical characterization of the synthetic nonceramic material next to the titanium implant interfaces. Results of the animal studies were compared with human histologic biopsies of the SBRG for bone quality, density, and bone growth into defect sites concurrent with resorption time of the graft. One human biopsy consisted of a graft mixture of the SBRG and dense bovine-derived HA, compared under the electron microscope, including histology by H and E staining. Part 1 of this paper presents evidence of the predictability and efficacy of the SBRG osteoconductive, particulate chemical potentiality to aid in the regeneration of lost bone anatomy next to titanium implant interfaces. Recent technological innovations in computer hardware and software have given clinicians the tools to determine 3-dimensional quality and density of bone, including anatomical discrepancies, which can aid in the diagnosis and treatment planning for grafting procedures. When teeth are extracted, the surrounding bone and soft tissue are challenged as a result of the natural resorptive process. The diminished structural foundation for prosthetic reconstruction, with or without implants, can be compromised. A synthetic bioactive resorbable graft material having osteoconductive biochemical and biomechanical qualities similar to the host bone provides the means to improve compromised bone topography for ridge preservation, ridge augmentation, or to enhance the bony site for implant placement and subsequent prosthetic rehabilitation. Part two of this paper will demonstrate clinical applications of the SBRG material for purposes of implant placement and prosthetic reconstruction.
Prevalence of genotypic resistance in untreated HIV-infected patients.

Eiros Jm,Raquel Blanco,C. Labayru,B. Hernández,Germán Bou,M. Domínguez-Gil,R. OrtizdeLejarazu

2004-09-01

Abstract:The aims of this retrospective study are to assess the prevalence of primary resistances to antiretroviral drugs, both reverse transcriptase and protease inhibitors in untreated patients from Spain, and to determine their possible association with several epidemiological variables. A total of 148 samples belonging to 145 patients were processed using the genotypic technique VERSANT HIV 1 (LiPA) in order to study the presence of mutations at codons 41, 69, 70, 74, 75, 103, 106, 151, 181, 184 and 215 of the reverse transcriptase gene (VERSANT HIV 1 RT) and at codons 30, 46, 48, 50, 54, 82, 84 and 90 of the protease gene (VERSANT HIV 1 Protease). The patients' epidemiological variables which could be relevant to HIV infection were also analyzed. The successful amplification rate was 77.70% for LiPA RT and 91.21% for LiPA P. In the case of LiPA RT, statistical significance (p < 0.05) was observed when successful amplification was related to viral load level (p < 0.001). Global prevalence of resistance was 20.27%. Mutations in the reverse transcriptase gene were found in eight samples (5.40%). Using LiPA P, mutations were detected in 16.21% of cases, with V82A being the most frequently detected mutation (15/24, 62.50%) in nine samples. The V82A mutation was found alone (66.6%) and it was found together with the I84V mutation in five samples (20.83%). I84V was the second most frequently detected mutation (13/24, 54.16%). No statistical significance was found for any of the epidemiological variables. Due to the problems encountered in a high percentage of samples, the authors concluded that the amplification technique should be improved. The prevalence of resistance detected was around the mean of that found by other authors.
Horizontal Guided Bone Regeneration of the Posterior Mandible to Allow Implant Placement: 1‐Year Prospective Study Results

Jonas Lorenz,Shahram Ghanaati,Zoran Aleksic,Iva Milinkovic,Zoran Lazic,Marko Magić,Bastian Wessing,Ramona Schleich Grotenclos,Mauro Merli,Giorgia Mariotti,Eriberto Bressan,Luca De Stavola,Robert Sader

DOI: https://doi.org/10.1111/clr.14363

2024-10-03

Clinical Oral Implants Research

Abstract:Objective Assess whether horizontal ridge augmentation with guided bone regeneration (GBR) using deproteinized bovine bone mineral (DBBM), autologous bone, and a resorbable collagen membrane supports successful implant placement. Materials and Methods This open, prospective, single‐cohort, multicenter clinical study included patients with ridge defects that required GBR prior to implant insertion. The primary endpoint was radiologically assessed bone gain after 8 months post‐GBR, measured at the center of planned implant sites. Secondary endpoints included implant survival and success, marginal bone levels (MBLs), MBL changes, and soft tissue health. Results Of 45 patients evaluated 8 months post‐GBR, nine experienced dehiscence in the first 3 weeks of the healing period. GBR led to radiologically determined mean bone width gain of 4.0 ± 1.5 mm and 4.8 ± 1.7 mm, measured 1 and 3 mm from the top of the crest, respectively, allowing successful implant placement in 44 patients (97.8%). The cumulative implant survival and success rates were 98.9% and 95.5%, respectively. MBLs were stable: −1.18 ± 0.64 mm at definitive prosthesis placement (DPP) and − 1.07 ± 0.74 mm at 1 year. Soft tissue health and esthetics (plaque and bleeding indices, papilla, keratinized mucosa, and pink esthetic score) improved from DPP to 1 year. Patients were highly satisfied with implant function and esthetics, and their oral health‐related quality of life improved. Conclusions GBR using DBBM and a collagen membrane offered a safe and effective treatment option for horizontal ridge augmentation sufficient to support implant‐based tooth rehabilitation. Trial Registration Registered at ClinicalTrials.gov NCT03028922 (registrations sites, as above listed affiliations, first posted January 23, 2017)

engineering, biomedical,dentistry, oral surgery & medicine
Fish oil increases antioxidant enzyme activities in macrophages and reduces atherosclerotic lesions in apoE-knockout mice.

Hsueh-Hsiao Wang,Tzu-Ming Hung,Jeng Wei,A. Chiang

DOI: https://doi.org/10.1016/J.CARDIORES.2003.11.002

IF: 13.081

Cardiovascular Research

Abstract:
Immediate single-tooth replacement with acellular dermal matrix allogeneic bone on sloped platform-switching implants: A case series

David Barack,Sergio Rubinstein,Kenneth Milin,Yu Wang,Rodrigo Neiva

2021-05-12

Abstract:Achieving predictable success with implants in the aesthetic zone is essential for clinicians. Promoting marginal bone and stability of the gingival environment is key to obtaining a predictable aesthetic outcome. The present study aimed to describe a technique that combines a flapless approach to immediate extraction and placement of sloped implants, using an acellular dermal matrix to contain the coronal aspect of a deproteinised bovine bone mineral graft. This minimally invasive technique results in stable augmentation of soft tissue thickness to ensure predictable aesthetic results. A collection of case reports with a follow-up period of up to 45 months is presented to demonstrate the surgical technique. Clinical presentation showed relative stability of the soft tissue margins during the evaluation period.
Clinical and Micro-CT analyses of Vertical Guided Bone Regeneration of Mandible using a d-PTFE Membrane, Autogenous Bone, and High-Temperature Processed Xenograft- A Case Series Study

Ran Herzberg,Gil Slutzkey,Perry Raz,Fatma Rayyan,Illan Beitlitum

DOI: https://doi.org/10.11607/jomi.11062

2024-08-09

Abstract:Purpose: To evaluate the efficacy of vertical guided bone regeneration (GBR) in the mandible utilizing a non-resorbable membrane and a bone graft combination of autogenous bone chips, and high-temperature processed (HTP) xenograft, through CT scans and microCT analysis. Materials and Methods: Patients underwent vertical ridge augmentation procedures prior to implant placement. The surgical procedure included flap elevation and placement of a bone graft comprising a 1:1 combination of autogenous posterior mandible-derived bone chips, and HTP xenograft graft particles covered with a d-PTFE membrane trimmed to suit the 3D shape of the bone defect. This was fastened securely with titanium screws and pins, and a layer of native collagen membrane. Post-operative complications and ridge measurements were assessed. Pre bone augmentation and pre implant placement bone parameters were obtained from CT scans. Biopsy specimens collected during implantation were examined by microCT. Results: All 13 study procedures were successful without any complications. The results revealed average vertical and horizontal bone gains of 3.35 mm and 5.15 mm respectively. A total of 33 implants were successfully placed in the augmented areas, without the need for further bone augmentation. MicroCT analysis revealed 48% bone, 15% filler material, and 37% non-calcified tissue in the augmented region compared to 65% bone, 3% filler material, and 32% non-calcified tissue in the pristine bone. Conclusions: A mixture of autogenous bone and HTP xenograft, covered with a d-PTFE membrane and a layer of native collagen membrane is effective for vertical GBR.
Microcomputed tomographic and histologic analysis of anorganic bone matrix coupled with cell-binding peptide suspended in sodium hyaluronate carrier after sinus augmentation: a clinical study

Hany Emam,Galal Beheiri,Mohammed Elsalanty,Mohamed Sharawy

Abstract:Purpose: Anorganic bovine hydroxyapatite matrix (ABM), when coupled with synthetic cell-binding peptide (P15), mimics the cell-binding region of type 1 collagen and is commercially available suspended in a sodium hyaluronate carrier. The aim of the present study, therefore, was to test the efficacy of ABM/P-15 Putty (DENTSPLY Friadent CeraMed) as a sole graft material for sinus augmentation in patients with severely resorbed posterior maxillae. Materials and methods: Sinus augmentation was performed in 10 patients using ABM/P-15 Putty and two provisional dental implants (3.0 mm in diameter). The graft and implants were placed simultaneously with the aid of a surgical stent. After 8 or 16 weeks, the implants were removed using a 4.25-mm trephine bur; this was followed by immediate placement of wider-diameter (5.5-mm) implants. All 20 implants were scanned by microcomputed tomography to determine bone mineral density (BMD), percent bone volume (PBV), and percent bone contact (PBC). Results: There was a significant increase in the BMD of bone around the implants at 8 weeks and 16 weeks compared to native residual (control) bone. There was no significant difference in PBV or PBC between 8 weeks and 16 weeks. The average increase in bone height at 16 weeks was 9.63 ± 1 mm. Microcomputed tomographic images and histologic sections showed dense graft particles surrounded by vital trabecular bone. Conclusion: BMD increases as early as 8 weeks and does not show an additional increase after 16 weeks. PepGen P-15 Putty was found to be a promising osteoconductive graft for sinus augmentation, supporting immediate placement of implants.
Polylactide/polyglycolide copolymer in bone defect healing in humans

Carlo Bertoldi,Davide Zaffe,Ugo Consolo

DOI: https://doi.org/10.1016/j.biomaterials.2007.12.034

IF: 14

2008-04-01

Biomaterials

Abstract:This pilot study aims to evaluate the healing of a large defects in the human jawbone filled with a Poly-Lactide-co-Glycolide (PLG) polymer (Fisiograft) by means of clinical, radiological and histological methods and to compare the results with those of platelet-rich plasma (PRP) clot or autologous bone (AB) fillings. Bone cysts, where previous non-surgical treatments failed to promote healing, underwent surgery. Nineteen consenting male patients were randomly split into three groups, packed with PRP, AB or PLG. A core biopsy was performed 4 and 6 months after surgery. All treated defects showed clinical, radiological and histological progresses over time. AB provided the best clinical and histological performance and PLG had overlapping outcomes; PRP filling was statistically different. Six months after surgery, bone activities were enhanced in sites treated with PLG and fairly good with PRP. Additionally, PLG showed some new lamellar formations. In conclusion, outcomes were best with AB graft, but suitable results were achieved using PLG to promote healing of severe bone defects. PLG shows only a delayed regenerative capability but does not require a secondary donor site.

engineering, biomedical,materials science, biomaterials
One-stage horizontal guided bone regeneration with autologous bone, anorganic bovine bone and collagen membranes: Follow-up of a prospective study 30 months after loading

Silvio Mario Meloni,Sascha Alexander Jovanovic,Milena Pisano,Giacomo De Riu,Edoardo Baldoni,Marco Tallarico

Abstract:Purpose: To present the medium-term results of one-stage guided bone regeneration (GBR) using autologous bone and anorganic bovine bone, placed in layers, in association with resorbable collagen membranes, for the reconstruction of horizontal bony defects. Materials and methods: This study was designed as an uncontrolled prospective study. Partially edentulous patients, having less than 6.0 mm and more than 4.0 mm of residual horizontal bone width were selected and consecutively treated with simultaneously implant installation and bone regeneration by using 2.0 mm of autologous bone and 2.0 mm of anorganic bovine bone that was placed in layers and then covered with a resorbable collagen membrane. Outcome measures were: implant and prosthesis failures, any complications, peri-implant marginal bone level changes, probing pocket depth (PPD) and bleeding on probing (BOP). Results: In total, 45 consecutive patients (20 male, 25 female) with a mean age of 52.1 years each received at least one GBR procedure, with contemporary placement of 63 implants. At the 3-year follow-up examination, no patient had dropped out and no deviation from the original protocol had occurred. No implant or prosthesis failed. In six patients (13.3%) the collagen membrane was slightly exposed 1 to 2 weeks after bone reconstruction. Four of these patients were moderate smokers. Post-hoc analysis using Fisher's exact test found significant association (P = 0.0139) between a smoking habit and early membrane exposure. Mean marginal bone loss experienced between initial loading and 30 months afterwards was 0.60 ± 0.20 mm (95% CI 0.54 - 0.66). The mean BOP values measured at the definitive restoration delivery were 1.23 ± 0.93, while 2 years later they were 1.17 ± 0.78. The difference was not statistically significant (-0.06 ± 0.76; P = 0.569). The mean PPD values measured at the definitive restoration delivery were 2.62 ± 0.59 mm, while 2 years later they were 2.60 ± 0.54 mm. The difference was not statistically significant (-0.03 ± 0.62; P = 0.765). Conclusions: Within the limitations of the present study, the use of a 2.0 mm layer of particulated autologous bone on the implant threads, and a 2.0 mm layer of anorganic bovine to cover the resorbed ridge, in combination with the resorbable collagen membrane, seems to be a viable treatment option for the reconstruction of horizontal bony defects.
Auto-dentin platelet-rich fibrin matrix is an alternative biomaterial for different augmentation procedures: A retrospective case series report

Abdusalam Alrmali,Muhammad H A Saleh,John Mazzocco,Jacob M Zimmer,Tiziano Testori,Hom-Lay Wang

DOI: https://doi.org/10.1002/cre2.808

Abstract:Objectives: Autologous dentin grafts derived from extracted teeth have shown promise as bone graft materials for promoting bone regeneration. This retrospective case series aimed to evaluate clinical, radiographic, and histologic outcomes of using autologous dentin matrices in various bone regeneration procedures. Materials and methods: This case series included 26 eligible patients and encompassed 4 socket preservation cases, 5 cases of guided tissue regeneration, 5 cases of guided bone regeneration (GBR), 10 cases of sinus augmentation procedures, 2 immediate placement implants, and 2 socket shields. Dentin grafts were prepared from extracted teeth, cleaned, and processed. These grafts were combined with platelet-rich fibrin (PRF) to create adhesive dentin matrices, then covered with collagen membranes for simultaneous guided bone augmentation cases. Cone beam computed tomography (CBCT) scans were conducted before surgery and 4 months postoperatively to assess ridge dimensions. Histologic evaluation was performed through bone core biopsies for socket preservation cases at the 4-month mark. Results: A total of 42 implants were placed in 26 patients, with an average follow-up of 32 months. Notably, two implant failures occurred following lateral maxillary sinus augmentation. CBCT scans at the 4-month interval revealed bone coverage over implant platforms in the majority of cases. Histologic analysis from two cases of socket preservation demonstrated dentin granules enveloped by newly formed bone undergoing continuous remodeling. The quantitative histomorphometric assessment revealed a bone area of 42.8 ± 3.56%, a remaining graft area of 19.05 ± 4.58%, and a viable bone of 38.15 ± 7.84%. Conclusions: The utilization of autologous dentin particles mixed with PRF proved effective as an alternative to conventional bone graft materials in GBR and maxillary sinus augmentation procedures. Larger controlled clinical trials are recommended to further substantiate these findings.
Horizontal ridge augmentation with a resorbable membrane and particulated autogenous bone with or without anorganic bovine bone-derived mineral: a prospective case series in 22 patients

Istvan A Urban,Heiner Nagursky,Jaime L Lozada

Abstract:Purpose: This prospective case series evaluated the use of a new synthetic resorbable membrane with autogenous bone, either alone or in combination with anorganic bovine bone-derived mineral, for horizontal ridge augmentation and subsequent implant placement. Materials and methods: Particulated autogenous bone, either alone or in combination with anorganic bovine bone-derived mineral, was used for lateral ridge augmentation and covered with a new synthetic resorbable membrane (glycolide and trimethylene carbonate) to treat knife-edged ridges and prepare them for implant placement. Ridge measurements were obtained before and after augmentation, complications were recorded, and biopsy specimens were examined histologically. Results: Fifty-eight implants were placed in 22 patients with 25 surgical sites in knife-edged ridges. No complications were associated with this treatment. Clinical measurements revealed an average of 5.56 mm (± 1.45 mm) of lateral ridge augmentation after an average of 8.12 months (± 2.32 months) of graft healing. Clinically, all treated ridges were sufficient in width for subsequent implant placement. All implants have survived, with an average follow-up period of 45.88 months (± 12.43 months). Histologic analysis of the selected augmentation sites showed new bone formation and good incorporation of the bovine bone mineral particles. Conclusion: The high implant survival rate and the low complication rate show the potential of this technique for the treatment of horizontal augmentation of lateral ridges and the efficacy of the new resorbable synthetic membrane.
The use of light/chemically hardened polymethylmethacrylate, polyhydroxyethylmethacrylate, and calcium hydroxide graft material in combination with polyanhydride around implants in minipigs: part I: immediate stability and function

Hatice Hasturk,Alpdogan Kantarci,Mazen Ghattas,Marcella Schmidt,Russell A Giordano,Arthur Ashman,Thomas G Diekwisch,Thomas Van Dyke

DOI: https://doi.org/10.1902/jop.2011.100617

Abstract:Background: The present study is designed as a proof-of-concept study to evaluate light/chemical hardening technology and a newly formulated polymethylmethacrylate, polyhydroxyethylmethacrylate, and calcium hydroxide (PPCH) plus polyanhydride (PA) (PPCH-PA) composite graft material as a bone substitute compared to positive and negative controls in a minipig model. Methods: PPCH-PA (composite graft); PPCH alone (positive control), PA alone (positive control), and no graft (negative control) were compared. Four mandibular premolar teeth per quadrant were extracted; a total of 48 implants were placed into sockets in three minipigs. Abutments were placed protruding into the oral cavity 4 mm in height for immediate loading. Crestal areas and intrabony spaces were filled with PPCH-PA, PPCH, or PA using a three-phase delivery system in which all graft materials were hardened by a light cure. In the negative control group, implant sites were left untreated. At 12 weeks, block sections containing implants were obtained. Evaluations included periodontal probing, pullout-force load, and stability measurements to determine implant stability, radiographs to examine bone levels, and scanning electron microscopy (SEM)-energy-dispersed spectroscopy to determine bone-to-implant contact. Results: Probing measurements did not reveal any pathologic pocket formation or bone loss. Radiographs revealed that immediate implant placement and loading resulted in bone at or slightly apical to the first thread of the implant in all groups at 12 weeks. Stability test values showed a relative clinical stability for all implants (range: -7 to +1); however, implants augmented with PPCH-PA exhibited a statistically significantly greater stability compared to all other groups (P <0.05). The newly formed bone in PPCH-PA-treated sites was well organized with less marrow spaces and well-distributed osteocytes. SEM revealed a tighter implant-socket interface in the PPCH-PA group compared to other groups with reduced microfissures and implant-bone interface fractures during pullout testing, whereas implants treated with PA or no graft showed ≈ 10-μm microfissures between the implant and bone with fractures of the intrathread bone. Conclusions: The newly formulated chemically hardened graft material PPCH-PA was useful in immediate implant placement after tooth extraction and resulted in greater stability and a well-organized implant-bone interface with immediate loading, especially in those areas where cancellous bone was present. The results of this proof-of-concept study warranted further research investigating different healing times and longer durations.

[Lipid metabolism disorder of the rat liver from parenterally administered deoxycholate].

Guided bone regeneration for peri‐implant augmentation: A retrospective study comparing two surgical techniques with a mean follow‐up of 26 months

Evaluation of Hard Tissue 3-Dimensional Stability Around Single Implants Placed with Guided Bone Regeneration in the Anterior Maxilla: A 3-Year Retrospective Study.

Multiple transitions and HIV risk among orphaned Kenyan schoolgirls.

Guided bone regeneration in implant dentistry: Basic principle, progress over 35 years, and recent research activities

Retrospective success and survival rates of dental implants placed with simultaneous bone augmentation in partially edentulous patients

Diagnostic efficacy of single-pass abdominal multidetector-row CT: prospective evaluation of a low dose protocol.

Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery

Stage-specifically expressed genes of Angiostrongylus cantonensis: identification by differential display.

A synthetic bioactive resorbable graft for predictable implant reconstruction: part one

Prevalence of genotypic resistance in untreated HIV-infected patients.

Horizontal Guided Bone Regeneration of the Posterior Mandible to Allow Implant Placement: 1‐Year Prospective Study Results

Fish oil increases antioxidant enzyme activities in macrophages and reduces atherosclerotic lesions in apoE-knockout mice.

Immediate single-tooth replacement with acellular dermal matrix allogeneic bone on sloped platform-switching implants: A case series

Clinical and Micro-CT analyses of Vertical Guided Bone Regeneration of Mandible using a d-PTFE Membrane, Autogenous Bone, and High-Temperature Processed Xenograft- A Case Series Study

Microcomputed tomographic and histologic analysis of anorganic bone matrix coupled with cell-binding peptide suspended in sodium hyaluronate carrier after sinus augmentation: a clinical study

Polylactide/polyglycolide copolymer in bone defect healing in humans

One-stage horizontal guided bone regeneration with autologous bone, anorganic bovine bone and collagen membranes: Follow-up of a prospective study 30 months after loading

Auto-dentin platelet-rich fibrin matrix is an alternative biomaterial for different augmentation procedures: A retrospective case series report

Horizontal ridge augmentation with a resorbable membrane and particulated autogenous bone with or without anorganic bovine bone-derived mineral: a prospective case series in 22 patients

The use of light/chemically hardened polymethylmethacrylate, polyhydroxyethylmethacrylate, and calcium hydroxide graft material in combination with polyanhydride around implants in minipigs: part I: immediate stability and function