Abstract:Purpose:Different from the theory of acoustic monopole spherical radiation, the acoustic dipole radiation based theory introduces the radiation pattern of Lorentz force induced dipole sources to describe the principle of magnetoacoustic tomography with magnetic induction (MAT‐MI). Although two‐dimensional (2D) simulations have been studied for cylindrical phantom models, layer effects of the dipole sources within the entire object along thez direction still need to be investigated to evaluate the performance of MAT‐MI for different geometric specifications. The purpose of this work is further verifying the validity and generality of acoustic dipole radiation based theory for MAT‐MI with two new models in different shapes, dimensions, and conductivities.Methods:Based on the theory of acoustic dipole radiation, the principles of MAT‐MI were analyzed with derived analytic formulae. 2D and 3D numerical studies for two new models of aluminum foil and cooked egg were conducted to simulate acoustic pressures and corresponding waveforms, and 2D images of the scanned layers were reconstructed with the simplified back projection algorithm for the waveforms collected around the models. The spatial resolution for conductivity boundary differentiation was also analyzed with different foil thickness. For comparison, two experimental measurements were conducted for a cylindrical aluminum foil phantom and a shell‐peeled cooked egg. The collected waveforms and the reconstructed images of the scanned layers were achieved to verify the validation of the acoustic dipole radiation based theory for MAT‐MI.Results:Despite the difference between the 2D and 3D simulated pressures, good consistence of the collected waveforms proves that wave clusters are generated by the abrupt pressure changes with bipolar vibration phases, representing the opposite polarities of the conductivity changes along the measurement direction. The configuration of the scanned layer can be reconstructed in terms of shape and size, and the conductivity boundaries are displayed in stripes with different contrast and bipolar intensities. Layer effects are demonstrated to have little influence on the collected waveforms and the reconstructed images of the scanned layers for the two new models. The experimental results have good agreements with numerical simulations, and the reconstructed 2D images provide conductivity configurations in the scanned layers of the aluminum foil and the egg models.Conclusions:It can be concluded that the acoustic pressure of MAT‐MI is produced by the divergence of the induced Lorentz force, and the collected waveforms comprise wave clusters with bipolar vibration phases and different amplitudes, providing the information of conductivity boundaries in the scanned layer. With the simplified back projection algorithm for diffraction sources, collected waveforms can be used to reconstruct 2D conductivity contrast image and the conductivity configuration in the scanned layer can be obtained in terms of shape and size in stripes with the spatial resolution of the acoustic wavelength. The favorable results further verify the validity and generality of the acoustic dipole radiation based theory and suggest the feasibility of MAT‐MI as an effective electrical impedance contrast imaging approach for medical imaging.

Implementation method for magneto-acoustic concentration tomography with magnetic induction (MACT-MI) based on the method of moments

New technique of magnetoacoustic tomography with magnetic induction

Simulation research on magneto-acoustic concentration tomography of magnetic nanoparticles with magnetic induction

Simulation research on the forward problem of magnetoacoustic concentration tomography for magnetic nanoparticles with magnetic induction in a saturation magnetization state

Simulation study on magneto-acoustic concentration tomography of magnetic nanoparticles based on vectorial acoustic source and BICGSTAB method

Simulation research on magneto-acoustic concentration tomography of magnetic nanoparticles based on truncated singular value decomposition (TSVD)

Simulation research on effect of magnetic nanoparticles on physical process of magneto–acoustic tomography with magnetic induction

A 3D reconstruction algorithm for magneto-acoustic tomography with magnetic induction based on ultrasound transducer characteristics

Transducer Influence on Magnetoacoustic Tomography with Magnetic Induction Based on 3D Equivalent Source Analysis for Tissues

Acoustic Dipole Radiation Based Conductivity Image Reconstruction for Magnetoacoustic Tomography with Magnetic Induction

Reception Pattern Influence on Magnetoacoustic Tomography with Magnetic Induction

Improved Magneto-Acousto-Electrical Computed Tomography (MAE-CT) With Multi-Angle Plane Wave Excitation

Acoustic Dipole Radiation Model for Magnetoacoustic Tomography with Magnetic Induction

Second Harmonic Magnetoacoustic Responses of Magnetic Nanoparticles in Magnetoacoustic Tomography with Magnetic Induction

Acoustic Source Analysis of Magnetoacoustic Tomography with Magnetic Induction for Conductivity Gradual-Varying Tissues

Analysis of the Magnetoacoustic Tomography with Magnetic Induction

Two-Dimensional Lorentz Force Image Reconstruction for Magnetoacoustic Tomography with Magnetic Induction

[Image reconstruction of conductivity on magnetoacoustic tomography with magnetic induction]

Acoustic Dipole Radiation Based Electrical Impedance Contrast Imaging Approach of Magnetoacoustic Tomography with Magnetic Induction

Conductivity Anisotropy Influence on Acoustic Sources for Magnetoacoustic Tomography with Magnetic Induction.