Removal of N-methyldiethanolamine in wastewater by using electro-activated persulfate: mechanisms and applicability

Yong-Tao Li,Wan-Ying Du,Jing-Lin Chen,Jiu-Jiang Zhang,Xin-Yue Liu,Hao Liu,Yi-Lan Zhang,Yuan-Yuan Hu
DOI: https://doi.org/10.1016/j.jece.2022.108008
IF: 7.7
2022-06-03
Journal of Environmental Chemical Engineering
Abstract:In this study, the feasibility of N-methyldiethanolamine (MDEA) degradation by electrochemical activation of persulfate (PS) was evaluated. Effects of PS dosing, voltage and initial pH on the removal rate of MDEA were investigated. The removal rate of COD and TOC were more than 80% and 60% respectively when PS dosage was 0.84 mM, pH = 7 and voltage (U) was 50 V. Due to the synergistic effect between SO 4 - · and three-dimensional (3D) electrochemical system, the removal rate was increased by 23~61% compared to the system acting alone. Kinetic analysis showed that the degradation process followed a pseudo-first-order model reaction and that the apparent reaction rate constant (k obs ) increased with increasing voltage over a range of values, but was greater at PS dosing levels of 0.84 mM and at neutral pH. Two possible pathways for the degradation of MDEA were proposed by Gas Chromatography-Mass Spectrometry (GC-MS) detection of the degradation products. The theoretical sulfate radical content of 1.653 × 10 -5 mol/L was also calculated by dynamic model when the dosage of PS was 0.84 mM and the initial pH was 5.
engineering, chemical, environmental
What problem does this paper attempt to address?