Abstract:This study tried to use electroflocculating precipitated waste to prepare a Si@Al adsorbent by simply mixing sodium silicate at a mass ratio of 4:1 and calcining at 200 °C for 2 h. The adsorbent was low cost, high efficiency, and could remove a variety of contaminants (organic pollutants, antibiotics, and metal ions) from water. In this study, adsorbent characterization and pollutant adsorption experiments were carried out. The results showed that: Si@Al adsorbent had uniform particles, distinct layers, a loose porous appearance, and the internal structure was scattered without a crystal structure. The optimal adsorption conditions for tetracycline were as follows: dosage of adsorbent 2.0 g/L, reaction time 10 min, pH = 4.5, and tetracycline removal rate of 97.13%. The optimal adsorption conditions for MB (MB stands for methylene blue) were an adsorption dosage of 4.0 g/L, a reaction time of 15 min, pH = 4.5–8.5, and a removal rate of 96.39%. The optimal adsorption conditions for Cu were a 2.0 g/L dosage of adsorbent, a reaction time of 30 min, a pH of 8.5, and a highest removal rate of 97.47%. It was worth noting that the effect of temperature on TC, MB and Cu was not significant. At the same time, the kinetic fitting results showed that the adsorption of MB was more consistent with the quasi-second-order kinetic model, with R2 ranging from 0.9788 to 1.0000. The adsorption of TC and Cu was more consistent with the quasi-first-order kinetic model, with R2 ranging from 0.9598 to 0.9999 and 0.9844 to 0.9988, respectively. According to the results of thermodynamics, kinetics and zero potential point, the adsorption of tetracycline and methylene blue was mainly a physical adsorption, multilayer heterogeneous or single-layer homogeneous adsorption process. The adsorption of Cu was categorized as multi-layer heterogeneous chemical adsorption. The co-existing substances had little effect on the properties of the adsorbent, and the adsorbent could be recycled 5 times. Compared with other adsorbents, the results showed that the adsorbents had obvious advantages in terms of the raw material source, preparation method, time cost and removal effect. This study provided a “waste into treasure, green and efficient” multi-pollutant adsorption method.

Preparation of 3D flower-like double oxide hydrotalcite composite using pollen as a biotemplate and their effective adsorption for quinolone antibiotics

Ce-UiO-66-F4-based Composites Decorated with Green Carbon Dots for Universal Adsorption of Organic Pollutants Containing Hydrogen Bond Donors and Its Application Exploration

Carbon quantum dots/UiO-66@polysulfone porous microspheres fabricated via pickering emulsion template for pollutant removal

Sulfonate-Bonded Conjugated Microporous Polymer Hollowed-Out Spheres to Capture Fluoroquinolone Antibiotics and Cationic Dyes from Wastewater

Preparation of Activated Carbon-Reinforced Composite Beads Based on MnO2/MCM-41@Fe3O4 and Calcium Alginate for Efficient Removal of Tetracycline in Aqueous Solutions

S-Cu Doubly Doped NiFe LDH@Diatomite with Adjustable Surface Characteristics for the Efficient Removal of Tetracycline

Preparation of Amino-Fe(iii) Functionalized Mesoporous Silica for Synergistic Adsorption of Tetracycline and Copper.

Preparation and Application of Si@Al Adsorbents for Different Pollutants Removal from Aqueous Solution

In-situ uniform growth of ZIF-8 on 3D flower-like NiCoLDH microspheres to enhance tetracycline and doxycycline removal from wastewater: Anti-interference and stability tests

Cu+-Ti Bimetallic Modified SiO2 Nanospheres Synthesized by "One-Pot" In Situ Reduction Method for Efficiently Removing Tetracycline from Aqueous Solution

Precursor-oriented design of nano-alumina for efficient removal of antibiotics

Efficient removal of fluoroquinolones antibiotics by using kaolin-tannic acid-Fe(III) composite adsorbents from water

Preparation of 3-dimensional flower-like NiFe2O4 with enhanced adsorptive performance for water contaminants

Co-adsorption of tetracycline and copper by the thiourea-modified porous sodium alginate microspheres

Heterogeneous nucleation and synthesis of carbon dots hybrid Zr-based MOFs for simultaneous recognition and effective removal of tetracycline

In-situ growth of Fe-MOF on magnetic materials by self-template method to enhance practicality and removal of tetracycline antibiotics from aqueous solution

Fabricating Materials of Institute Lavoisier-53(Fe)/zeolite imidazolate framework-8 hybrid materials as high-efficiency and reproducible adsorbents for removing organic pollutants

Efficient Removal of Pb(II), Cr(VI), and Tetracycline Hydrochloride from Aqueous Solutions Using UiO-66-AMP@PAN: Thermodynamics, Kinetics, and Isothermal Adsorption

Construction of a novel Ag/AgBr/AgI@SiO2 composite aerogel with controlled pore structure: Efficient removal of tetracycline by adsorption/photocatalysis synergism under visible light irradiation

Improved performance of 3D hierarchical NiAl-LDHs micro-flowers via a surface anchored ZIF-8 for rapid multiple-pollutants simultaneous removal and residues monitoring

Iron‑calcium dual crosslinked graphene oxide/alginate aerogel microspheres for extraordinary elimination of tetracycline in complex wastewater: Performance, mechanism, and applications