Abstract:As the growth of society and the continuous upgrading of people's living standards increase, people's requirements for indoor environment are also increasing. To optimize the ventilation methods inside buildings, a numerical simulation method was used to construct numerical simulations of airflow organization and aerosol diffusion, and based on this model, better ventilation methods were determined. To optimize the determined better ventilation method, a multi-constraint optimization model was constructed using infection probability, thermal comfort, energy utilization coefficient, and velocity non-uniformity coefficient. The ventilation method was optimized through multi-objective constraints. To solve the optimization model, an optimized particle swarm algorithm was studied and designed. The results showed that under the "air rain" flow field, the maximum values of aerosol particles at the human body, bed surface, and outlet were 171, 769, and 19,973, respectively, while the minimum values were 4, 169, and 2197, respectively. The "air rain" flow field is a better ventilation method. The maximum and minimum values of the original non-uniformity coefficient were 0.44 and 0.08, respectively. After optimization by the particle swarm optimization algorithm, the maximum and minimum predicted non-uniformity coefficients were 0.457 and 0.08, respectively. The original value and predicted value are very close. The numerical model and algorithm constructed by the research institute are effective. The algorithm designed by the research institute can provide technical support for multi-objective optimization of indoor ventilation methods.

What problem does this paper attempt to address?

### What problem does this paper attempt to solve? This paper aims to optimize indoor ventilation methods to improve indoor air quality, reduce the spread of indoor pollutants and viruses, and lower the probability of infection. Specifically, the paper addresses the problem through the following aspects: 1. **Building a Numerical Simulation Model**: - Computational Fluid Dynamics (CFD) is used to construct numerical models of indoor airflow organization and aerosol diffusion. - Four indoor ventilation methods are selected for study: mixed ventilation, "air rain" flow field, floor supply air, and displacement ventilation. 2. **Determining the Optimal Ventilation Method**: - Based on the above numerical models, a more optimal ventilation method, the "air rain" flow field, is determined. - This method can effectively suppress the diffusion of indoor pollutants but also has some drawbacks, such as the need to install suspended floors and ceilings. 3. **Multi-objective Optimization Model**: - A multi-constraint optimization mathematical model is constructed, considering four indicators: infection probability, thermal comfort, energy utilization coefficient, and velocity non-uniformity coefficient. - An improved Particle Swarm Optimization (PSO) algorithm is designed, introducing Support Vector Regression (SVR) to optimize the particle swarm algorithm and solve the multi-objective optimization problem. ### Main Innovations: 1. **Comprehensive Evaluation Indicators**: When determining the optimal ventilation method, comprehensive consideration is given to infection probability, thermal comfort, energy utilization coefficient, and velocity non-uniformity coefficient. 2. **Introduction of Support Vector Regression (SVR)**: SVR is used to optimize the particle swarm algorithm, improving algorithm performance. ### Objectives and Significance: - By optimizing indoor ventilation technology, provide better indoor air quality for dormitory buildings. - Reduce the spread of indoor pollutants and viruses, lowering the probability of infection. - Improve the health level and work efficiency of residents.

Optimization Design of Indoor Environmental Ventilation in Buildings Based on Improved SVR-PSO Model

Optimization of Ventilation System Operation in Office Environment Using Pod Model Reduction and Genetic Algorithm

Ventilation Optimization for Reduction of Indoor Semi-Volatile Organic Compound Concentration Based on the Variational Principle

Multi-objective Optimization Design of Residential Area Based on Microenvironment Simulation

Enhancing IAQ, thermal comfort, and energy efficiency through an adaptive multi-objective particle swarm optimizer-grey wolf optimization algorithm for smart environmental control

A Combinatorial Optimization Strategy for Performance Improvement of Stratum Ventilation Considering Outdoor Weather Changes and Metabolic Rate Differences: Energy Consumption and Sensitivity Analysis

A coupled computational fluid dynamics and back-propagation neural network-based particle swarm optimizer algorithm for predicting and optimizing indoor air quality

Multi-objective ventilation optimization for indoor air quality, thermal comfort, and energy conservation in the post-pandemic era: A case study for a moving elevator

Balancing ventilation performance and energy conservation: An integrated multi-objective optimization and preference-based decision-making model for optimizing impinging jet ventilation

Predictive modelling and optimization of HVAC systems using neural network and particle swarm optimization algorithm

Examination and Optimization of Classroom Indoor Environments in China’s Hot Summer and Cold Winter Regions

Optimization Analysis of Natural Ventilation in University Laboratories Based on CFD Simulation

Optimising The Supply Parameters Oriented To Multiple Individual Requirements In One Common Space

Modeling and optimization of a passive building HVAC system based on improved PSO and H-J Algorithm

Optimal design of building environment with hybrid genetic algorithm, artificial neural network, multivariate regression analysis and fuzzy logic controller

Air supply parameter optimization of a custom nonuniform temperature field based on the POD method

A New Optimization Design Method of Multi-Objective Indoor Air Supply Using the Kriging Model and NSGA-II

Study of multi-objective optimization of overall ventilation performance for an impinging jet ventilation system using Taguchi-based grey relational analysis

Research on Optimization of Climate Responsive Indoor Space Design in Residential Buildings

Optimization of ventilation design for indoor air quality by using a new conception-spatial flow influence factor