[Burdened women: the differential diagnosis and treatment].

E. Vieta

Abstract:

What problem does this paper attempt to address?

Microclimate monitoring in commercial tomato (Solanum Lycopersicum L.) greenhouse production and its effect on plant growth, yield and fruit quality

Jakub Šalagovič,Dorien Vanhees,Pieter Verboven,Kristof Holsteens,Bert Verlinden,Marlies Huysmans,Bram Van de Poel,Bart Nicolaï

DOI: https://doi.org/10.3389/fhort.2024.1425285

2024-10-07

Abstract:Introduction High annual tomato yields are achieved using high-tech greenhouse production systems. Large greenhouses typically rely only on one central weather station per compartment to steer their internal climate, ignoring possible microclimate conditions within the greenhouse itself. Methods In this study, we analysed spatial variation in temperature and vapour pressure deficit in a commercial tomato greenhouse setting for three consecutive years. Multiple sensors were placed within the crop canopy, which revealed microclimate gradients. Results and discussion Different microclimates were present throughout the year, with seasonal (spring – summer – autumn) and diurnal (day – night) variations in temperature (up to 3 °C, daily average) and vapour pressure deficit (up to 0.6 kPa, daily average). The microclimate effects influenced in part the variation in plant and fruit growth rate and fruit yield – maximum recorded difference between two locations with different microclimates was 0.4 cm d -1 for stem growth rate, 0.6 g d -1 for fruit growth rate, 80 g for truss mass at harvest. The local microclimate effect on plant growth was always larger than the bulk climate variation measured by a central sensor, as commonly done in commercial greenhouses. Quality attributes of harvested tomato fruit did not show a significant difference between different microclimate conditions. In conclusion, we showed that even small, naturally occurring, differences in local environment conditions within a greenhouse may influence the rate of plant and fruit growth. These findings could encourage the sector to deploy larger sensor networks for optimal greenhouse climate control. A sensor grid covering the whole area of the greenhouse is a necessity for climate control strategies to mitigate suboptimal conditions.
Optimizing Greenhouse Design with Miniature Models and IoT (Internet of Things) Technology—A Real-Time Monitoring Approach

Ioana Udrea,Viorel Ionut Gheorghe,Angel Madalin Dogeanu

DOI: https://doi.org/10.3390/s24072261

IF: 3.9

2024-04-03

Sensors

Abstract:The market for smart greenhouses has been valued at USD 1.77 billion in 2022 and is expected to grow to 3.39 billion by 2030. In order to make this more efficient, with the help of Internet of Things (IoT) technology, it is desired to eliminate the problem of traditional agriculture, which has poor monitoring and accuracy control of the parameters of a culture. Climate control decisions in a greenhouse are made based on parameter monitoring systems, which can be remotely controlled. Instead of this adjustment of the measured parameters, it would be preferable from the point of view of energy consumption that they should be calculated at optimal values from the design phase of the greenhouse. For this reason, it would be better to perform an energy simulation of the greenhouse first. For the study carried out in this work, a small greenhouse (mini-greenhouse) was built. It was equipped with an IoT sensor system, which measured indoor climate parameters and could send data to the cloud for future recording and processing. A simplified mathematical model of the heat balance was established, and the measured internal parameters of the mini-greenhouse were compared with those obtained from the simulation. After validating the mathematical model of the mini-greenhouse, this paper aimed to find the optimal position for placing a normal-sized greenhouse. For this, several possible locations and orientations of the greenhouse were compared by running the mathematical model, with which the most unfavorable positions could be eliminated. Then, some considerably cheaper "mini-greenhouses" were made and placed in the locations with the desired orientations. Using sensor systems and technologies similar to those presented in this work, the parameters from all mini-greenhouses can be monitored in real time. This real-time monitoring allows for the simultaneous analysis of all greenhouses, without the disadvantages of data collection directly in the field, with all data being recorded in the cloud and other IoT-specific advantages being made use of. In the end, we can choose the optimal solution for the location of a real-size greenhouse.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Development of an IoT-Based Precision Irrigation System for Tomato Production from Indoor Seedling Germination to Outdoor Field Production

Mohammad Hussain Seyar,Tofael Ahamed

DOI: https://doi.org/10.3390/app13095556

2023-04-29

Applied Sciences

Abstract:Proper irrigation management, especially for tomatoes that are sensitive to water, is the key to ensuring sustainable tomato production. Using a low-cost sensor coupled with IoT technology could help to achieve precise control of the moisture content in the plant root-zone soil and apply water on demand with minimum human intervention. An IoT-based precision irrigation system was developed for growing Momotaro tomato seedlings inside a dark chamber. Four irrigation thresholds, 5%, 8%, 12%, and 15%, and two irrigation systems, surface and subsurface drip irrigation, were compared to assess which threshold and irrigation system referred the ideal tomato seedling growth. As a result, the 12% soil moisture threshold applied through the subsurface drip irrigation system significantly (p < 0.05) increased tomato seedling growth in soil composed of a main blend of peat moss, vermiculite, and perlite. Furthermore, in two repeated experiments, a subsurface drip irrigation system with 0.86 distribution uniformity used 10% less water than the surface drip irrigation system. The produced tomato seedlings were transplanted to open fields for further assessment. A low-power wide area networking Long Range Wide Area Network (LoRaWAN) protocol was developed with remote monitoring and controlling capability for irrigation management. Two irrigation systems, including surface and subsurface drip irrigations, were used to compare which system resulted in higher tomato yields. The results showed that the subsurface drip irrigation system with 0.74 distribution uniformity produced 1243 g/plant, while each plant produced 1061 g in the surface drip irrigation system treatment. The results also indicated that the LoRaWAN-based subsurface drip irrigation system was suitable under outdoor conditions with easy operation and robust controlling capability for tomato production.

materials science, multidisciplinary,engineering,chemistry,physics, applied
Review of optimum temperature, humidity, and vapour pressure deficit for microclimate evaluation and control in greenhouse cultivation of tomato: a review

Redmond Ramin Shamshiri,James W. Jones,Kelly R. Thorp,Desa Ahmad,Hasfalina Che Man,Sima Taheri

DOI: https://doi.org/10.1515/intag-2017-0005

2018-04-01

International Agrophysics

Abstract:Abstract Greenhouse technology is a flexible solution for sustainable year-round cultivation of Tomato (Lycopersicon esculentum Mill), particularly in regions with adverse climate conditions or limited land and resources. Accurate knowledge about plant requirements at different growth stages, and under various light conditions, can contribute to the design of adaptive control strategies for a more cost-effective and competitive production. In this context, different scientific publications have recommended different values of microclimate parameters at different tomato growth stages. This paper provides a detailed summary of optimal, marginal and failure air and root-zone temperatures, relative humidity and vapour pressure deficit for successful greenhouse cultivation of tomato. Graphical representations of the membership function model to define the optimality degrees of these three parameters are included with a view to determining how close the greenhouse microclimate is to the optimal condition. Several production constraints have also been discussed to highlight the short and long-term effects of adverse microclimate conditions on the quality and yield of tomato, which are associated with interactions between suboptimal parameters, greenhouse environment and growth responses.

agronomy
A Physics-Based Modelling and Control of Greenhouse System Air Temperature Aided by IoT Technology

Beatrice Faniyi,Zhenhua Luo

DOI: https://doi.org/10.3390/en16062708

IF: 3.2

2023-03-14

Energies

Abstract:The need to reduce energy consumption in greenhouse production has grown. Thermal heating demand alone accounts for 80% of conventional greenhouse energy consumption; this significantly reduces production profit. Since microclimate affects crop metabolic processes and output, it is essential to monitor and control it to achieve both quantity and quality production with minimum energy consumption for maximum profit. The Internet of Things (IoT) is an evolving technology for monitoring and controlling environments that have recently been adopted to boost greenhouse efficiency in many applications by integrating hardware and software solutions; therefore, its adoption is thus critical in enabling greenhouse energy consumption minimisation. The first objective of this study is to improve and validate a greenhouse dynamic air temperature model required to simulate or predict indoor temperature. To achieve the first objective, therefore, an existing model was enhanced and a closed loop test experimental data from the IoT cloud-based control system platform deployed in the prototype greenhouse built in Cranfield University was used to validate the model using an optimisation-based model fitting approach. The second goal is to control the greenhouse air temperature in simulation using relatively simple PI and on-off control strategies to maintain the grower’s desired setpoint irrespective of the inevitable disturbances and to verify the potential of the controllers in minimising the total energy input to the greenhouse. For the second objective, the simulation results showed that the two controllers maintained the desired setpoint; however, the on-off strategy retained a sustainable oscillation, and the tuned PI effectively maintained the desired temperature, although the average energy used by the controllers is the same.

energy & fuels
IoT-based Monitoring of Temperature and Humidity with Fuzzy Control in Cherry Tomato Greenhouses

Gerome A. Mandapat,A. Yumang,Lemuel Aldwin P. Garcia

DOI: https://doi.org/10.1109/ICCAE56788.2023.10111404

2023-03-03

Abstract:Temperature and Humidity are two environmental factors that heavily impact the growth of a plant. The unpredictability of external environmental conditions in traditional farming present difficulties in obtaining stable fruit yields. This can be avoided in enclosed environments through the implementation of an automated temperature and humidity controller. The study performed in this paper shows the effect of maintaining temperature and humidity levels within a greenhouse environment on cherry tomato fruit yield. Changes to internal temperature and humidity levels were done through sensors and controlling devices responsible for influencing internal readings to remain within a certain threshold. The implementation of fuzzy logic in the decision making automated the actions required to maintain optimal conditions within the greenhouse. To determine whether the controlled greenhouse temperature and humidity levels introduced a positive effect on cherry tomato yield, harvests from an outside plot and the greenhouse plot were recorded and compared using the two-sample t-test statistical treatment. Under the null hypothesis, the assumption that no increase in fruit yield was made, whereas the assumption that an increase in fruit yield was made under the alternate hypothesis. With a calculated value of t = 1.7271 and a critical value of 1.701 which was found using a degree of freedom of 28 and a confidence interval of 95%, the alternate hypothesis was been accepted. Thus, showing that the fuzzy logic controller has been effective in making the appropriate decisions to maintain optimal temperature and humidity levels for fruit production.

Agricultural and Food Sciences,Computer Science,Engineering,Environmental Science
Application of Internet of Things (IoT) for Optimized Greenhouse Environments

Chrysanthos Maraveas,Thomas Bartzanas

DOI: https://doi.org/10.3390/agriengineering3040060

2021-11-29

AgriEngineering

Abstract:This review presents the state-of-the-art research on IoT systems for optimized greenhouse environments. The data were analyzed using descriptive and statistical methods to infer relationships between the Internet of Things (IoT), emerging technologies, precision agriculture, agriculture 4.0, and improvements in commercial farming. The discussion is situated in the broader context of IoT in mitigating the adverse effects of climate change and global warming in agriculture through the optimization of critical parameters such as temperature and humidity, intelligent data acquisition, rule-based control, and resolving the barriers to the commercial adoption of IoT systems in agriculture. The recent unexpected and severe weather events have contributed to low agricultural yields and losses; this is a challenge that can be resolved through technology-mediated precision agriculture. Advances in technology have over time contributed to the development of sensors for frost prevention, remote crop monitoring, fire hazard prevention, precise control of nutrients in soilless greenhouse cultivation, power autonomy through the use of solar energy, and intelligent feeding, shading, and lighting control to improve yields and reduce operational costs. However, particular challenges abound, including the limited uptake of smart technologies in commercial agriculture, price, and accuracy of the sensors. The barriers and challenges should help guide future Research & Development projects and commercial applications.
Smart high-yield tomato cultivation: precision irrigation system using the Internet of Things

Debabrata Singh,Anil Kumar Biswal,Debabrata Samanta,Vijendra Singh,Seifedine Kadry,Awais Khan,Yunyoung Nam

DOI: https://doi.org/10.3389/fpls.2023.1239594

2023-08-22

Abstract:The Internet of Things (IOT)-based smart farming promises ultrafast speeds and near real-time response. Precision farming enabled by the Internet of Things has the potential to boost efficiency and output while reducing water use. Therefore, IoT devices can aid farmers in keeping track crop health and development while also automating a variety of tasks (such as moisture level prediction, irrigation system, crop development, and nutrient levels). The IoT-based autonomous irrigation technique makes exact use of farmers' time, money, and power. High crop yields can be achieved through consistent monitoring and sensing of crops utilizing a variety of IoT sensors to inform farmers of optimal harvest times. In this paper, a smart framework for growing tomatoes is developed, with influence from IoT devices or modules. With the help of IoT modules, we can forecast soil moisture levels and fine-tune the watering schedule. To further aid farmers, a smartphone app is currently in development that will provide them with crucial data on the health of their tomato crops. Large-scale experiments validate the proposed model's ability to intelligently monitor the irrigation system, which contributes to higher tomato yields.
Implementation of an In-Field IoT System for Precision Irrigation Management

Younsuk Dong,Benjamin Werling,Zhichao Cao,Gen Li

DOI: https://doi.org/10.3389/frwa.2024.1353597

2024-01-01

Frontiers in Water

Abstract:Due to the impact of climate change on agriculture and the emergence of water security issues, proper irrigation management has become increasingly important to overcome the challenges. The Internet of Things (IoT) technology is being utilized in agriculture for collecting field information and sharing it through websites in real time. This study discusses the efforts taken to develop an IoT-based sensor station, a user-friendly website, and a smartphone app for irrigation management. In addition, the demonstration of the IoT-based sensor station and its effectiveness are discussed. Before deploying the sensor station, soil moisture sensor calibration was conducted using a laboratory experiment. Overall, the calibrated soil moisture sensors met the statistical criteria for both sand [root mean squared error (RMSE) = 0.01 cm3/cm3, index of agreement (IA) = 0.97, and mean bias error (MBE) = 0.01] and loamy sand (RMSE = 0.023 cm3/cm3, IA = 0.98, and MBE = −0.02). This article focuses on case studies from corn, blueberry, and tomato fields in Michigan, USA. In the corn and blueberry fields, the evaluation of irrigation practices of farmer's using an IoT-based sensor technology was considered. In the tomato field, a demonstration of automation irrigation was conducted. Overirrigation was observed using the IoT-based sensor station in some fields that have sandy soil and use a drip irrigation system. In the blueberry demonstration field, the total yield per plant (p = 0.025) and 50-berry weights (p = 0.013) were found to be higher with the recommended irrigation management than the farmer's existing field. In the tomato demonstration field, there were no statistical differences in the number of marketable tomatoes (p = 0.382) and their weights (p = 0.756) between the farmer's existing method and the recommended irrigation strategy. However, 30% less water was applied to the recommended irrigation strategy plot. Thus, the result showed that the IoT-based sensor irrigation strategy can save up to 30% on irrigation while maintaining the same yields and quality of the product.
Evaluation of Smart Greenhouse Monitoring System using Raspberry-Pi Microcontroller for the Production of Tomato Crop

Bilal Ahmad,Raees Ahmed,Sohaib Masroor,Basharat Mahmood,Syed Zia Ul Hasan,Muhammad Jamil,Muhammad Tariq Khan,Muhammad Tahir Younas,Arshad Wahab,Bilal Haydar,Muzaffar Subhani,Muhammad Ammar Khan,Sohail Tariq

DOI: https://doi.org/10.38211/joarps.2023.04.01.54

2023-01-01

Journal of Applied Research in Plant Sciences

Abstract:To provide fresh and highly nutritive food, automated greenhouses and smart farming systems had proved to be helpful for growing world population. The smart greenhouse house monitoring system not only helpful in exploiting the production but also helpful to bridge up the quality of the produce. The current study was designed to explore the potential use of a smart greenhouse monitoring system using Raspberry-Pi microcontroller. The aim of the study was to create a smart automation system to control the microclimate of greenhouse. Two varieties of tomato (Roma and cherry tomato) were used both in smart greenhouse system as well as in conventional greenhouse system to compare the agronomic and quality parameters. Temperature and humidity were set according to the production technology of tomato using automation system. Proper fertilization and irrigation requirements were considered equal in all aspects in smart greenhouse and conventional greenhouse. The smart greenhouse monitoring system worked better in maintaining the microclimate inside the greenhouse with a difference of about 5-6 °C temperature and 20-30% humidity higher than the conventional greenhouse. The results predicted a progressive increase in agronomic parameter with a difference of 10-15% in plant height, number of leaves, number of fruits and weight of fruit as compared with growth parameters in conventional greenhouse. Similarly the quality parameters were effective with maximum size of fruit in Roma variety that was 75 mm as compared to fruit size 65 mm in conventional farming. The over average yield of tomato per plant (5.5 kg/plant) was also recorded in smart greenhouse that was significantly increased as compared with conventional greenhouse. The results predicted that the yield of tomato was positively affected using smart greenhouse monitoring system and consequently, the smart technologies could be used for the potential crop production and monitoring of cultivation activities.
A Cloud-Based IoT Platform for Precision Control of Soilless Greenhouse Cultivation

Alaa Sagheer,Maged Mohammed,Khaled Riad,Mohammed Alhajhoj

DOI: https://doi.org/10.3390/s21010223

2020-12-31

Abstract:Food security has become an increasingly important challenge for all countries globally, particularly as the world population continues to grow and arable lands are diminishing due to urbanization. Water scarcity and lack of labor add extra negative influence on traditional agriculture and food production. The problem is getting worse in countries with arid lands and harsh climate, which exacerbates the food gap in these countries. Therefore, smart and practical solutions to promote cultivation and combat food production challenges are highly needed. As a controllable environment, greenhouses are the perfect environment to improve crops' production and quality in harsh climate regions. Monitoring and controlling greenhouse microclimate is a real problem where growers have to deal with various parameters to ensure the optimal growth of crops. This paper shows our research in which we established a multi-tier cloud-based Internet of things (IoT) platform to enhance the greenhouse microclimate. As a case study, we applied the IoT platform on cucumber cultivation in a soilless medium inside a commercial-sized greenhouse. The established platform connected all sensors, controllers, and actuators placed in the greenhouse to provide long-distance communication to monitor, control, and manage the greenhouse. The implemented platform increased the cucumber yield and enhanced its quality. Moreover, the platform improved water use efficiency and decreased consumption of electrical energy. Based on the positive impact on water use efficiency and enhancement on cucumber fruit yield and quality, the established platform seems quite suitable for the soilless greenhouse cultivation in arid regions.
IoT-enabled Greenhouse Systems: Optimizing Plant Growth and Efficiency

Swathi Manoharan,Chong Peng Lean,Chen Li,Kong Feng Yuan,Ng Poh Kiat,Mohammed Reyasudin Basir Khan

DOI: https://doi.org/10.56532/mjsat.v4i2.294

2024-04-08

Abstract:Greenhouses have long been important in the advancement of agricultural operations because they provide regulated settings for optimal plant growth. With the introduction of real-time monitoring and automation capabilities, the Internet of Things (IoT) integration into greenhouse systems represents a revolutionary change. This abstract delves into the wider field of greenhouse technology, highlighting the role that IoT plays in improving agricultural in controlled environments. Conventional greenhouses provide plants with a protected environment, but they might not be as accurate or flexible. Intelligent control of environmental conditions is made possible by the introduction of IoT-enabled greenhouses, which utilize data exchange protocols, actuators, and sensors that are networked. The project aims to elevate traditional greenhouse models by integrating Node-RED and MQTT technologies. Transitioning from a Blynk-based prototype showcases the system's versatility. Other key components, including NodeMCU, sensors for real-time data, and LED lighting, collaborate to redefine controlled environment agriculture. The Raspberry Pi serves as a central hub, facilitating seamless communication through Node-RED and MQTT. This advanced greenhouse system harmonizes cutting-edge technologies, showcasing a commitment to sophistication and adaptability in agricultural practices.
Development and Implementation of an IoT-Enabled Optimal and Predictive Lighting Control Strategy in Greenhouses

Shirin Afzali,Sahand Mosharafian,Marc W van Iersel,Javad Mohammadpour Velni

DOI: https://doi.org/10.3390/plants10122652

2021-12-02

Abstract:Global population growth has increased food production challenges and pushed agricultural systems to deploy the Internet of Things (IoT) instead of using conventional approaches. Controlling the environmental parameters, including light, in greenhouses increases the crop yield; nonetheless, the electricity cost of supplemental lighting can be high, and hence, the importance of applying cost-effective lighting methods arises. In this research paper, a new optimal supplemental lighting approach was developed and implemented in a research greenhouse by adopting IoT technology. The proposed approach minimizes electricity cost by leveraging a Markov-based sunlight prediction, plant light needs, and a variable electricity price profile. Two experimental studies were conducted inside a greenhouse with "Green Towers" lettuce (Lactuca sativa) during winter and spring in Athens, GA, USA. The experimental results showed that compared to a heuristic method that provides light to reach a predetermined threshold at each time step, our strategy reduced the cost by 4.16% and 33.85% during the winter and spring study, respectively. A paired t-test was performed on the growth parameter measurements; it was determined that the two methods did not have different results in terms of growth. In conclusion, the proposed lighting approach reduced electricity cost while maintaining crop growth.
Nemesis - a molecular modeling package

J. Stepán,P. Kulhánek,Milan Lenco,Zora Strelcová,A. Křenek,J. Koča

DOI: https://doi.org/10.1186/1758-2946-5-S1-P12

2013-03-22

Journal of Cheminformatics

Abstract:
Estimation of tomato water status with photochemical reflectance index and machine learning: Assessment from proximal sensors and UAV imagery

Zhehan Tang,Yufang Jin,Patrick H. Brown,Meerae Park

DOI: https://doi.org/10.3389/fpls.2023.1057733

IF: 5.6

2023-04-07

Frontiers in Plant Science

Abstract:Tracking plant water status is a critical step towards the adaptive precision irrigation management of processing tomatoes, one of the most important specialty crops in California. The photochemical reflectance index (PRI) from proximal sensors and the high-resolution unmanned aerial vehicle (UAV) imagery provide an opportunity to monitor the crop water status efficiently. Based on data from an experimental tomato field with intensive aerial and plant-based measurements, we developed random forest machine learning regression models to estimate tomato stem water potential ( ψ stem ), (using observations from proximal sensors and 12-band UAV imagery, respectively, along with weather data. The proximal sensor-based model estimation agreed well with the plant ψ stem with R 2 of 0.74 and mean absolute error (MAE) of 0.63 bars. The model included PRI, normalized difference vegetation index, vapor pressure deficit, and air temperature and tracked well with the seasonal dynamics of ψ stem across different plots. A separate model, built with multiple vegetation indices (VIs) from UAV imagery and weather variables, had an R 2 of 0.81 and MAE of 0.67 bars. The plant-level ψ stem maps generated from UAV imagery closely represented the water status differences of plots under different irrigation treatments and also tracked well the temporal change among flights. PRI was found to be the most important VI in both the proximal sensor- and the UAV-based models, providing critical information on tomato plant water status. This study demonstrated that machine learning models can accurately estimate the water status by integrating PRI, other VIs, and weather data, and thus facilitate data-driven irrigation management for processing tomatoes.

plant sciences
IoT Based Complete Green House Monitoring And Controlling System

Radhika .,Jagan J,Mohammad ,,Thilak .,Bharath .,,,,,

DOI: https://doi.org/10.26562/ijirae.2023.v1006.03

2023-06-23

International Journal of Innovative Research in Advanced Engineering

Abstract:An overview of a greenhouse monitoring system that was constructed utilizing IoT devices and sensors is provided in this abstract. By offering real-time monitoring and management of environmental elements essential for plant development, the system attempts to optimize the cultivation process. Sensors with IoT capabilities gather information on temperature, humidity, light intensity, soil moisture, and CO2 levels, which is then sent to a central hub or cloud platform for analysis. The system has benefits including automation, data-driven decision-making, and remote monitoring. On their cell phones, farmers may get real-time data and warnings, allowing for flexible control of greenhouse operations. In order to find trends and recommend measures for enhancing agricultural output and resource utilisation, machine learning algorithms analyse the sensor data. Automation enables accurate environmental parameter management, lowering human error and increasing productivity. Farmers may increase crop output, maximise resource usage, and support sustainable agricultural practises by putting in place an IoT-based greenhouse monitoring system.
Simulation of Daily Transpiration of Tomatoes Grown in Venlo-Type Greenhouse Substrates

Ping Yi,Xiaoman Qiang,Shengxing Liu,Yang Han,Yunfeng Li,Hao Liu,Jinglei Wang

DOI: https://doi.org/10.3390/plants13030374

2024-01-28

Plants

Abstract:An appropriate water supply strategy is imperative for obtaining tomatoes of a high yield and quality; the lack of one has caused resource wastage and quality deterioration. To determine the suitable irrigation amount and simulate daily transpiration under these optimal irrigation conditions, a two-year greenhouse cultivation experiment was conducted over 2022–2023. Commencing at anthesis, three distinct irrigation gradients were triggered and designated as irrigation controls with the lower limits set at 80% (T1), 70% (T2), and 60% (T3) of the substrate water-holding capacity. We determined the optimal irrigation amount by ranking the treatments using the TOPSIS method, balancing the tomato yield and quality. A segmented daily transpiration model under optimal irrigation conditions driven by crop and environmental factors was established using the Marquardt method and data from 2022, and the model was validated using data from 2023. The results indicated that T2 was the optimal irrigation amount, with the water use efficiency increased by 18.0%, but with a 10.9% decrease in yield, while the quality indices improved significantly. The R2 values of the segmented model in the flowering and fruit-setting stage and the picking stage were 0.92 and 0.86, respectively, which could provide support for optimized water management for tomato planting in greenhouse substrate cultivation.

plant sciences
Nurturing Agribusiness: A Sustainable Farming System for Tomato Crop Management Leveraging Machine Learning

B. Leelaram Praksh,Mallikarjuna Rao Gundavarapu,S. Bhargavi Latha,S Ravi Kumar Raju,NVS Pavan Kumar

DOI: https://doi.org/10.17762/ijritcc.v11i10s.7696

2023-10-07

International Journal on Recent and Innovation Trends in Computing and Communication

Abstract:The agriculture industry is undergoing a transformative shift with the introduction of IoT technology, enabling global connectivity for farmers. This technology offers a plethora of advantages, ranging from precise seed selection based on soil analysis to efficient crop maintenance, water management, and enhanced marketing support for improved profitability. To further enhance tomato farming practices, we propose the implementation of a smart farmer marketing assistant that streamlines the process of segregating yield based on its growth stage, reducing labor and time requirements.Further, the frame work is capable of early-disease management system that can detect diseases like early blight,light blight, buck eye rot and anthranose and suggest remedy. By adopting this innovative approach, financial losses associated with traditional methods are minimized.The traditional practice of combining all categories of vegetables (ripened, unripened, and partially rotten) in a single container often results in reduced shelf life for the produce. In our framework, we employ color sorting to categorize the vegetables, ensuring proper packing into their respective bins. This valuable data is made accessible through a cloud environment, providing potential buyers with comprehensive information about the yield, its category, and pricing. This increased visibility empowers farmers to reach a global market and sell their produce at competitive prices. In this context, we present a case study focused on the tomato crop, where we have successfully developed a prototype utilizing ESP32, a color sensor, and Google Firebase. This comprehensive framework effectively harnesses the power of IoT, Machine Learning, and potential marketing strategies, transforming the way farmers manage their crops and connect with buyers on a global scale with highly accurate 87.9% experimental results.
IoT-Based Monitoring System Applied to Aeroponics Greenhouse

Hugo A. Méndez-Guzmán,José A. Padilla-Medina,Coral Martínez-Nolasco,Juan J. Martinez-Nolasco,Alejandro I. Barranco-Gutiérrez,Luis M. Contreras-Medina,Miguel Leon-Rodriguez

DOI: https://doi.org/10.3390/s22155646

IF: 3.9

2022-07-29

Sensors

Abstract:The inclusion of the Internet of Things (IoT) in greenhouses has become a fundamental tool for improving cultivation systems, offering information relevant to the greenhouse manager for decision making in search of optimum yield. This article presents a monitoring system applied to an aeroponic greenhouse based on an IoT architecture that provides user information on the status of the climatic variables and the appearance of the crop in addition to managing the irrigation timing and the frequency of visual inspection using an application developed for Android mobile devices called Aeroponics Monitor. The proposed IoT architecture consists of four layers: a device layer, fog layer, cloud layer and application layer. Once the information about the monitored variables is obtained by the sensors of the device layer, the fog layer processes it and transfers it to the Thingspeak and Firebase servers. In the cloud layer, Thingspeak analyzes the information from the variables monitored in the greenhouse through its IoT analytic tools to generate historical data and visualizations of their behavior, as well as an analysis of the system's operating status. Firebase, on the other hand, is used as a database to store the results of the processing of the images taken in the fog layer for the supervision of the leaves and roots. The results of the analysis of the information of the monitored variables and of the processing of the images are presented in the developed app, with the objective of visualizing the state of the crop and to know the function of the monitoring system in the event of a possible lack of electricity or a service line failure in the fog layer and to avoid the loss of information. With the information about the temperature of the plant leaf and the relative humidity inside the greenhouse, the vapor pressure deficit (VPD) in the cloud layer is calculated; the VPD values are available on the Thingspeak server and in the developed app. Additionally, an analysis of the VPD is presented that demonstrates a water deficiency from the transplanting of the seedling to the cultivation chamber. The IoT architecture presented in this paper represents a potential tool for the study of aeroponic farming systems through IoT-assisted monitoring.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
An Intelligent IoT-Based System Design for Controlling and Monitoring Greenhouse Temperature

Ahmad F. Subahi,K. Bouazza

DOI: https://doi.org/10.1109/ACCESS.2020.3007955

IF: 3.9

2020-07-08

IEEE Access

Abstract:The Kingdom of Saudi Arabia is known for its extreme climate where temperatures can exceed 50 °C, especially in summer. Improving agricultural production can only be achieved using innovative environmentally suitable solutions and modern agricultural technologies. Using Internet of Things (IoT) technologies in greenhouse farming allows reduction of the immediate impact of external climatic conditions. In this paper, a highly scalable intelligent system controlling, and monitoring greenhouse temperature using IoT technologies is introduced. The first objective of this system is to monitor the greenhouse environment and control the internal temperature to reduce consumed energy while maintaining good conditions that improve productivity. A Petri Nets (PN) model is used to achieve both monitoring of the greenhouse environment and generating the suitable reference temperature which is sent later to a temperature regulation block. The second objective is to provide an Energy-Efficient (EE) scalable system design that handles massive amounts of IoT big data captured from sensors using a dynamic graph data model to be used for future analysis and prediction of production, crop growth rate, energy consumption and other related issues. The design tries to organize various possible unstructured formats of raw data, collected from different kinds of IoT devices, unified and technology-independent fashion using the benefit of model transformations and model-driven architecture to transform data in structured form.

Computer Science,Engineering,Environmental Science,Agricultural and Food Sciences

[Burdened women: the differential diagnosis and treatment].

Microclimate monitoring in commercial tomato (Solanum Lycopersicum L.) greenhouse production and its effect on plant growth, yield and fruit quality

Optimizing Greenhouse Design with Miniature Models and IoT (Internet of Things) Technology—A Real-Time Monitoring Approach

Development of an IoT-Based Precision Irrigation System for Tomato Production from Indoor Seedling Germination to Outdoor Field Production

Review of optimum temperature, humidity, and vapour pressure deficit for microclimate evaluation and control in greenhouse cultivation of tomato: a review

A Physics-Based Modelling and Control of Greenhouse System Air Temperature Aided by IoT Technology

IoT-based Monitoring of Temperature and Humidity with Fuzzy Control in Cherry Tomato Greenhouses

Application of Internet of Things (IoT) for Optimized Greenhouse Environments

Smart high-yield tomato cultivation: precision irrigation system using the Internet of Things

Implementation of an In-Field IoT System for Precision Irrigation Management

Evaluation of Smart Greenhouse Monitoring System using Raspberry-Pi Microcontroller for the Production of Tomato Crop

A Cloud-Based IoT Platform for Precision Control of Soilless Greenhouse Cultivation

IoT-enabled Greenhouse Systems: Optimizing Plant Growth and Efficiency

Development and Implementation of an IoT-Enabled Optimal and Predictive Lighting Control Strategy in Greenhouses

Nemesis - a molecular modeling package

Estimation of tomato water status with photochemical reflectance index and machine learning: Assessment from proximal sensors and UAV imagery

IoT Based Complete Green House Monitoring And Controlling System

Simulation of Daily Transpiration of Tomatoes Grown in Venlo-Type Greenhouse Substrates

Nurturing Agribusiness: A Sustainable Farming System for Tomato Crop Management Leveraging Machine Learning

IoT-Based Monitoring System Applied to Aeroponics Greenhouse

An Intelligent IoT-Based System Design for Controlling and Monitoring Greenhouse Temperature