Immunization as therapy for recurrent spontaneous abortion: A review and meta‐analysis

E. Fraser,D. Grimes,K. Schulz

DOI: https://doi.org/10.1016/0020-7292(94)90346-8

1993-11-01

Obstetrics and Gynecology

Abstract:

What problem does this paper attempt to address?

All-Aqueous Soft Milli-swimmers

Chunmei Zhou,Xin Tang,Rui Shi,Caihong Liu,Pingan Zhu,Liqiu Wang

DOI: https://doi.org/10.1021/acsami.4c05914

2024-08-07

Abstract:Microscale swimmers are attractive for targeted drug delivery, noninvasive microsurgery and environmental remediation at different length scales, among which, Marangoni-based swimmers have garnered considerable attention due to their independence of external energy supply. However, applications of most existing chemical swimmers are limited by complex fabrication, high cost, utilization of organic (or even toxic) solvents, poor motility performance, and lack of controllability. To address these challenges, we propose an approach for all-aqueous soft milli-swimmers that utilizes biodegradable hydrogels and biocompatible fuels. This innovative method achieves swimmer body generation and fuel loading in one step by simply dripping one aqueous solution into another, saving fabrication time and minimizing fuel loss during transfer. These all-aqueous soft milli-swimmers have rove beetle-like self-propulsion, which stores low-surface-energy compounds within their body for propulsion on liquid surfaces. Isotropic and anisotropic all-aqueous soft milli-swimmers are formed with precise control over their dimension, morphology, and movement velocity. Through their motion within engineered channels, intricate labyrinths, dynamic air-liquid interfaces, and collective self-assemblies, their remarkable adaptability in complex aqueous environments is demonstrated. Furthermore, the integration of functional nanoparticles endows these all-aqueous milli-swimmers with multifunctionality, expanding their applications in cargo transportation, sensing, and environmental remediation.
3-D Printed Swimming Microtori for Cargo Transport and Flow Manipulation

Remmi Baker,Thomas Montenegro-Johnson,Anton D. Sediako,Murray J. Thomson,Ayusman Sen,Eric Lauga,Igor. S. Aranson

DOI: https://doi.org/10.1038/s41467-019-12904-0

2020-04-02

Abstract:Through billions of years of evolution, microorganisms mastered unique swimming behaviors to thrive in complex fluid environments. Limitations in nanofabrication have thus far hindered the ability to design and program synthetic swimmers with the same abilities. Here we encode multi-behavioral responses in artificial swimmers such as microscopic, self-propelled tori using nanoscale 3D printing. We show experimentally and theoretically that the tori continuously transition between two primary swimming modes in response to a magnetic field. The tori also manipulate and transport other artificial swimmers, bimetallic nanorods, as well as passive colloidal particles. In the first behavioral mode, the tori accumulate and transport nanorods; in the second mode, nanorods align along the tori's self-generated streamlines. Our results indicate that such shape-programmed microswimmers have the potential to manipulate biological active matter, e.g. bacteria or cells.

Fluid Dynamics,Soft Condensed Matter
Minimal numerical ingredients describe chemical microswimmers's 3D motion

Maximilian R. Bailey,C. Miguel Barriuso Gutiérrez,José Martín-Roca,Vincent Niggel,Virginia Carrasco-Fadanelli,Ivo Buttinoni,Ignacio Pagonabarraga,Lucio Isa,Chantal Valeriani

2023-07-30

Abstract:The underlying mechanisms and physics of catalytic Janus microswimmers is highly complex, requiring details of the associated phoretic fields and the physiochemical properties of catalyst, particle, boundaries, and the fuel used. Therefore, developing a minimal (and more general) model capable of capturing the overall dynamics of these autonomous particles is highly desirable. In the presented work, we demonstrate that a coarse-grained dissipative particle-hydrodynamics model is capable of describing the behaviour of various chemical microswimmer systems. Specifically, we show how a competing balance between hydrodynamic interactions experienced by a squirmer in the presence of a substrate, gravity, and mass and shape asymmetries can reproduce a range of dynamics seen in different experimental systems. We hope that our general model will inspire further synthetic work where various modes of swimmer motion can be encoded via shape and mass during fabrication, helping to realise the still outstanding goal of microswimmers capable of complex 3-D behaviour

Soft Condensed Matter
Colloidal Nanosurfactants for 3D Conformal Printing of 2D Van Der Waals Materials.

Minxiang Zeng,Wenzheng Kuang,Irfan Khan,Dali Huang,Yipu Du,Mortaza Saeidi-Javash,Lecheng Zhang,Zhengdong Cheng,Anthony J. Hoffman,Yanliang Zhang

DOI: https://doi.org/10.1002/adma.202003081

IF: 29.4

2020-01-01

Advanced Materials

Abstract:Printing techniques using nanomaterials have emerged as a versatile tool for fast prototyping and potentially large-scale manufacturing of functional devices. Surfactants play a significant role in many printing processes due to their ability to reduce interfacial tension between ink solvents and nanoparticles and thus improve ink colloidal stability. Here, a colloidal graphene quantum dot (GQD)-based nanosurfactant is reported to stabilize various types of 2D materials in aqueous inks. In particular, a graphene ink with superior colloidal stability is demonstrated by GQD nanosurfactants via the pi-pi stacking interaction, leading to the printing of multiple high-resolution patterns on various substrates using a single printing pass. It is found that nanosurfactants can significantly improve the mechanical stability of the printed graphene films compared with those of conventional molecular surfactant, as evidenced by 100 taping, 100 scratching, and 1000 bending cycles. Additionally, the printed composite film exhibits improved photoconductance using UV light with 400 nm wavelength, arising from excitation across the nanosurfactant bandgap. Taking advantage of the 3D conformal aerosol jet printing technique, a series of UV sensors of heterogeneous structures are directly printed on 2D flat and 3D spherical substrates, demonstrating the potential of manufacturing geometrically versatile devices based on nanosurfactant inks.
Rational design and fabrication of versatile active colloidal molecules

Songbo Ni,Emanuele Marini,Ivo Buttinoni,Heiko Wolf,Lucio Isa

DOI: https://doi.org/10.48550/arXiv.1701.08061

2017-01-27

Abstract:Active colloids, also known as artificial microswimmers, are self-propelled micro and nanoparticles that convert uniform sources of fuel (e.g. chemical) or uniform external driving fields (e.g. magnetic or electric) into directed motion by virtue of asymmetry in their shape or composition. These materials are currently attracting enormous scientific attention for two main end uses. First, active colloids are prototypical internally driven, out-of-equilibrium systems and their study has led to new emergent material properties, such as swarming and living crystallization. Secondly, they hold the promise to be used as micro- and nanoscale devices with tremendous potential from medical to environmental applications. However, the current fabrication of active colloids is limited in the programmability of materials, geometry, and modes of motion. Here, we use sequential capillarity- assisted particle assembly (sCAPA) to link microspheres of different materials into clusters of prescribed shapes ("colloidal molecules") that can actively translate, circulate and rotate powered by asymmetric electro-hydrodynamic flows. Further engineering of the geometry and composition provides active colloids that switch motion under external triggers or perform simple pick-up and transport tasks. Our fabrication strategy enables both physicists and engineers to design and create customized active colloids to explore novel fundamental phenomena in active matter and to investigate materials and propulsion schemes that are compatible with future applications.

Soft Condensed Matter
Quantitative measurements of non-equilibrium interactions of catalytic microswimmers with dual colloidal tracers

Celso Carrasco,Quentin Martinet,Zaiyi Shen,Juho S. Lintuvuori,Jérémie Palacci,Antoine Aubret

2024-09-02

Abstract:Catalytic microswimmers convert the chemical energy of a fuel into motion, sustaining spatial chemical gradients and fluid flows that drive their propulsion. This leads to unconventional individual behavior and the emergence of collective dynamics, absent in equilibrium. The characterization of the nonequilibrium interactions driven by those concentration gradients and flows around microswimmers is challenging owing to the importance of fluctuations at the microscale. Previous experiments have focused on large Janus microspheres attached to a surface, and did not investigate non-equilibrium interactions for freely moving microswimmers of various shapes. Here we show a massive dependence of the non-equilibrium interactions on the shape of small catalytic microswimmers. We perform tracking experiments at high troughput to map non-equilibrium interactions between swimmers and colloidal tracers in 2D, accurate down to tracer velocity of 100nm/s. In addition, we devise a novel experimental method combining two types of tracers with differing phoretic mobility to disentangle phoretic interactions in concentration gradients from hydrodynamic flows. We benchmark the method with experiments on a single chemically active site and on a catalytic microswimmer tethered to a surface. We further investigate the activity-driven interactions of freely moving catalytic dimers as microswimmers, for a wide range of aspect ratio between the active and passive part. We confront our results with standard theoretical models of microswimmers near surfaces and show poor agreement, ruling out phoresis as the main interaction for catalytic swimmers. Our findings provide robust quantitative measurements of the non-equilibrium interactions of catalytic microswimmers of various geometry with their environment. The work notably indicates the need for theoretical development, and lays the groundwork for the quantitative description of collective behavior in suspensions of phoretically-driven colloidal suspensions.

Soft Condensed Matter
3D‐Printed Light‐Driven Microswimmer with Built‐In Micromotors

Yin Chen,Huanhua Yang,Mingliang Li,Shilu Zhu,Shuo Chen,Liuyi Dong,Fuzhou Niu,Runhuai Yang

DOI: https://doi.org/10.1002/admt.202100687

IF: 6.8

2021-09-01

Advanced Materials Technologies

Abstract:Untethered biocompatible microswimmers driven by micromotors in fluids can enable innovative technologies in fields such as biology and chemical and biomedical engineering. However, efficiently driving and controlling the movement of microswimmers by light remains a challenge. Herein, a method for fabricating a light-driven microswimmer with built-in micromotors and 3D-printed multiscale features that exhibits high photocatalytic performance is proposed. TiO2-CaCO3 composite microparticles (TC) are fabricated as highly efficient micromotors that provide high photocatalytic efficiency in bubble generation, while 3D-printed hydrogels are fabricated as TiO2-CaCO3/PEGDA (TC/P) microswimmers that provide biocompatibility, large specific surface area, and controllable movement. The results show that TC micromotors produced by physical mixing at a specific concentration exhibit a large specific surface area, reduced agglomeration, increased photocatalytic active sites, and improved photocatalytic stability. TC micromotors are effectively loaded into the porous hydrogel by 3D printing for multiscale fabrication to improve the photocatalytic performance across scales and realize effective and directional driving under violet light excitation. The TC/P microswimmers exhibit stable catalysis and motion in 7 days, at which point the catalysis by TiO2 is already ineffective. With stability, biocompatibility, and biomedical functions, this multiscale fabricated microswimmer exhibits great potential in micromanipulation and targeted therapy.

materials science, multidisciplinary
Tuning the motility and directionality of self-propelled colloids

Juan Ruben Gomez-Solano,Sela Samin,Celia Lozano,Pablo Ruedas-Batuecas,René van Roij,Clemens Bechinger

DOI: https://doi.org/10.1038/s41598-017-14126-0

2017-11-06

Abstract:Microorganisms are able to overcome the thermal randomness of their surroundings by harvesting energy to navigate in viscous fluid environments. In a similar manner, synthetic colloidal microswimmers are capable of mimicking complex biolocomotion by means of simple self-propulsion mechanisms. Although experimentally the speed of active particles can be controlled by e.g. self-generated chemical and thermal gradients, an in-situ change of swimming direction remains a challenge. In this work, we study self-propulsion of half-coated spherical colloids in critical binary mixtures and show that the coupling of local body forces, induced by laser illumination, and the wetting properties of the colloid, can be used to finely tune both the colloid's swimming speed and its directionality. We experimentally and numerically demonstrate that the direction of motion can be reversibly switched by means of the size and shape of the droplet(s) nucleated around the colloid, depending on the particle radius and the fluid's ambient temperature. Moreover, the aforementioned features enable the possibility to realize both negative and positive phototaxis in light intensity gradients. Our results can be extended to other types of half-coated microswimmers, provided that both of their hemispheres are selectively made active but with distinct physical properties.

Soft Condensed Matter
Algae-like Artificial Organic Phototactic Micro-swimmers

Somnath Koley,Karuna Kar Nanda

2023-08-10

Abstract:Phototaxis is a light driven self-locomotion of mass and a common phenomenon in motile organisms with varieties of motility such as in bacteria, algae, etc. In naturally occurring organisms, mechanical force is generated utilising their metabolic energy to propel and swim in presence of light, performing important bio-chemical reactions. Herein, we report a new class of micro-swimmers that exhibit captivating and complicated micro-swimming mediated colony formation properties resembling green algae. A facile pyrolysis reaction is explored leading to homogeneous organic Nano-structures forming patterned self-assemblies among themselves. A delicate balance of colloid surface forms interesting architectures such as dynamic colonies, thallus like patterning and cilia like micro-arms. In presence of weak light both positive and negative phototaxis are seen moving the micro-swimmers propelling towards and away from the light respectively. During swimming helical motion and electrostatic interactions of colloidal micro-swimmers with neighbouring assemblies are observed. The nature of assembly formation is found to be fractal and can be disintegrated using strong light. Strong exposure stimulates predominately fast negative phototaxis leading to directional propulsion along the light path. All these algae life-like behaviour of the colloidal carbonaceous lyophilic colloids are stable in alcohol and can be reversibly discontinued with water due to super-hydrophilicity. We therefore introduce a class of life-like colloidal chemical architecture. Our discovery may entice studies for creation of a diverse programmable micro-swimmers for microscopic understanding and manipulating collective effect of the assemblies for bio-mimetic and catalytic applications.

Soft Condensed Matter,Mesoscale and Nanoscale Physics,Materials Science,Chemical Physics
Semiconductor-Based Microswimmers: Attention to Detail Matters

Martin Wittmann,Astrid Ali,Thomas Gemming,Fernando Stavale,Juliane Simmchen

DOI: https://doi.org/10.1021/acs.jpclett.1c02658

2021-10-07

Abstract:Colloidal active matter is known for its sensitivity to external conditions; for example, the swimming speeds depend strongly on substrates, fuel concentration, and in the case of light-driven colloids, the illumination. While these points are regularly considered, the nanoscopic material properties of the motor bodies are often barely mentioned, but they are highly influential in the case of photocatalysts. In order to demonstrate the influence of subtle differences in chemical composition and interfacing between the different material compounds, we designed a system based on colloidal titania spheres asymmetrized by different nanoscale cobalt oxide species. We examine how the material properties and combinations lead to highly specific catalytic activity and cross-relate the subtle differences to the typical active behaviors of these complex materials.
Reconfigurable Artificial Microswimmers with Internal Feedback

L. Alvarez,M. A. Fernandez-Rodriguez,A. Alegria,S. Arrese-Igor,K. Zhao,M. Kröger,Lucio Isa

DOI: https://doi.org/10.1038/s41467-021-25108-2

2020-09-17

Abstract:Micron-size self-propelling particles are often proposed as synthetic models for biological microswimmers, yet they lack internally regulated adaptation, which is central to the autonomy of their biological counterparts. Conversely, adaptation and autonomy can be encoded in larger-scale soft-robotic devices, but transferring these capabilities to the colloidal scale remains elusive. Here, we create a new class of responsive microswimmers, powered by induced-charge electrophoresis, which can adapt their motility to external stimuli via an internal feedback. Using sequential capillary assembly, we fabricate deterministic colloidal clusters comprising soft thermoresponsive microparticles, which, upon spontaneous reconfiguration, induce motility changes, such as adaptation of the clusters' propulsion velocity and reversal of its direction. We rationalize the response in terms of a coupling between self-propulsion and variations of particle shape and dielectric properties. Harnessing those allows for strategies to achieve local dynamical control with simple illumination patterns, revealing exciting opportunities for the development of new tactic active materials.

Soft Condensed Matter,Materials Science
Wafer-Scale Fabrication of Micro- to Nanoscale Bubble Swimmers and Their Fast Autonomous Propulsion by Ultrasound

Jeffrey M McNeill,Nitesh Nama,Jesse M Braxton,Thomas E Mallouk

DOI: https://doi.org/10.1021/acsnano.0c03311

IF: 17.1

2020-06-23

ACS Nano

Abstract:Fuel-free, biocompatible swimmers with dimensions smaller than one micrometer have the potential to revolutionize the way we study and manipulate microscopic systems. Sub-micrometer, metallic Janus particles can be propelled rapidly and autonomously by acoustically induced fluid streaming, but their operation at acoustic pressure nodes limits their utility. In contrast, bubble-based microswimmers have an "on board" resonant cavity that enables them to operate far from the source of acoustic power. So far, they have been fabricated by direct writing techniques that limit both their minimum dimensions and the number that can be produced. Consequently, the size scaling of the properties of bubble swimmers has not been explored experimentally. Additionally, 3D autonomous motion has not yet been demonstrated for this type of swimmer. We describe here a method for fabricating bubble swimmers in large numbers (>109) with sizes ranging from 5 μm to 500 nm without direct writing or photolithographic tools. These swimmers follow a previously proposed scaling theory and reveal useful phenomena that enable their propulsion in different modes in the same experiment: with magnetic steering, autonomously in 3D, and in frequency-specific autonomous modes. These interesting behaviors are relevant to possible applications of autonomously moving micro- and nanorobots.
Microswimmers in Patterned Environments

Giovanni Volpe,Ivo Buttinoni,Dominik Vogt,Hans-Juergen Kuemmerer,Clemens Bechinger

DOI: https://doi.org/10.1039/c1sm05960b

2011-05-24

Abstract:We demonstrate with experiments and simulations how microscopic self-propelled particles navigate through environments presenting complex spatial features, which mimic the conditions inside cells, living organisms and future lab-on-a-chip devices. In particular, we show that, in the presence of periodic obstacles, microswimmers can steer even perpendicularly to an applied force. Since such behaviour is very sensitive to the details of their specific swimming style, it can be employed to develop advanced sorting, classification and dialysis techniques.

Biological Physics,Soft Condensed Matter
Janus microswimmers are poor hydrodynamic mixers

Maximilian Bailey,Dmitry Fedosov,Federico Paratore,Fabio Grillo,Gerhard Gompper,Lucio Isa

2024-04-02

Abstract:The generation of fluid flows by autophoretic microswimmers has been proposed as a mechanism to enhance mass transport and mixing at the micro- and nanoscale. Here, we experimentally investigate the ability of model 2-D "active baths" of photocatalytic silica-titania Janus microspheres to enhance the diffusivity of tracer particles at different microswimmer densities below the onset of collective behaviour. Inspired by the similarities between our experimental findings and previous results for biological microorganisms, we then model our Janus microswimmers using a general squirmer framework, specifically treating them as neutral squirmers. The numerical simulations faithfully capture our observations, offer an insight into the microscopic mechanism underpinning tracer transport, and allow us to expand the parameter space beyond our experimental system. We find strong evidence that near-field interactions dominate enhancements in tracer diffusivity in active Janus baths, leading to the identification of an operating window for enhanced tracer transport by chemical microswimmers based on scaling arguments. Based on this argumentation, we suggest that for many chemically active colloidal systems, hydrodynamics alone is likely to be insufficient to induce appreciable mixing of passive components with large diffusion coefficients.

Soft Condensed Matter
Remote control of self-assembled microswimmers

Galien Grosjean,Guillaume Lagubeau,Alexis Darras,Maxime Hubert,Geoffroy Lumay,Nicolas Vandewalle

DOI: https://doi.org/10.1038/srep16035

2015-07-03

Abstract:Physics governing the locomotion of microorganisms and other microsystems is dominated by viscous damping. An effective swimming strategy involves the non-reciprocal and periodic deformations of the considered body. Here, we show that a magnetocapillary-driven self-assembly, composed of three soft ferromagnetic beads, is able to swim along a liquid-air interface when powered by an external magnetic field. More importantly, we demonstrate that trajectories can be fully controlled, opening ways to explore low Reynolds number swimming. This magnetocapillary system spontaneously forms by self-assembly, allowing miniaturization and other possible applications such as cargo transport or solvent flows.

Fluid Dynamics,Soft Condensed Matter
Activity-induced microswimmer interactions and cooperation in one-dimensional environments

Stefania Ketzetzi,Melissa Rinaldin,Pim Dröge,Joost de Graaf,Daniela J. Kraft

DOI: https://doi.org/10.48550/arXiv.2103.07335

2021-03-12

Soft Condensed Matter

Abstract:Cooperative motion in biological microswimmers is crucial for their survival as it facilitates adhesion to surfaces, formation of hierarchical colonies, efficient motion, and enhanced access to nutrients. Synthetic microswimmers currently lack truly cooperative behavior that originates from activity-induced interactions. Here, we demonstrate that catalytic microswimmers show a variety of cooperative behaviors along one-dimensional paths. We show that their speed increases with the number of swimmers, while the activity induces a preferred distance between swimmers. Using a minimal model, we ascribe this behavior to an effective activity-induced potential that stems from a competition between chemical and hydrodynamic coupling. These interactions further induce active self-assembly into trains as well as compact chains that can elongate, break-up, become immobilized and remobilized. We identify the crucial role that environment morphology and swimmer directionality play on these highly dynamic chain behaviors. These activity-induced interactions open the door towards exploiting cooperation for increasing the efficiency of, as well as provide temporal and spatial control over, microswimmer motion, thereby enabling them to perform intricate tasks inside complex environments.
3D-Printed Biodegradable Microswimmer for Theranostic Cargo Delivery and Release

Hakan Ceylan,Immihan Ceren Yasa,Oncay Yasa,Ahmet Fatih Tabak,Joshua Giltinan,Metin Sitti

DOI: https://doi.org/10.1021/acsnano.8b09233

IF: 17.1

2019-03-26

ACS Nano

Abstract:Untethered mobile microrobots have the potential to leverage minimally invasive theranostic functions precisely and efficiently in hard-to-reach, confined, and delicate inner body sites. However, such a complex task requires an integrated design and engineering, where powering, control, environmental sensing, medical functionality, and biodegradability need to be considered altogether. The present study reports a hydrogel-based, magnetically powered and controlled, enzymatically degradable microswimmer, which is responsive to the pathological markers in its microenvironment for theranostic cargo delivery and release tasks. We design a double-helical architecture enabling volumetric cargo loading and swimming capabilities under rotational magnetic fields and a 3D-printed optimized 3D microswimmer (length = 20 μm and diameter = 6 μm) using two-photon polymerization from a magnetic precursor suspension composed from gelatin methacryloyl and biofunctionalized superparamagnetic iron oxide nanoparticles. At normal physiological concentrations, we show that matrix metalloproteinase-2 (MMP-2) enzyme could entirely degrade the microswimmer in 118 h to solubilized nontoxic products. The microswimmer rapidly responds to the pathological concentrations of MMP-2 by swelling and thereby boosting the release of the embedded cargo molecules. In addition to delivery of the drug type of therapeutic cargo molecules completely to the given microenvironment after full degradation, microswimmers can also release other functional cargos. As an example demonstration, anti-ErbB 2 antibody-tagged magnetic nanoparticles are released from the fully degraded microswimmers for targeted labeling of SKBR3 breast cancer cells in vitro toward a potential future scenario of medical imaging of remaining cancer tissue sites after a microswimmer-based therapeutic delivery operation.
Stochastic dynamics of dissolving active particles

Alexander Chamolly,Eric Lauga

DOI: https://doi.org/10.1140/epje/i2019-11854-3

2019-07-16

Abstract:The design of artificial microswimmers has generated significant research interest in recent years, for promise in applications such as nanomotors and targeted drug-delivery. However, many current designs suffer from a common problem, namely the swimmers remain in the fluid indefinitely, posing risks of clogging and damage. Inspired by recently proposed experimental designs, we investigate mathematically the dynamics of degradable active particles. We develop and compare two distinct chemical models for the decay of a swimmer, taking into account the material composition and nature of the chemical or enzymatic reaction at its surface. These include a model for dissolution without a reaction, as well as models for a reacting swimmer studied in the limit of large and small Damköhler number. A new dimensionless parameter emerges that allows the classification of colloids into ballistic and diffusive type. Using this parameter, we perform an asymptotic analysis to derive expressions for colloid lifetimes and their total mean squared displacement from release and validate these by numerical Monte Carlo simulations of the associated Langevin dynamics. Supported by general scaling relationships, our theoretical results provide new insight into the experimental applicability of a wide range of designs for degradable active colloids.
Rechargeable self-assembled droplet microswimmers driven by surface phase transitions

Diana Cholakova,Maciej Lisicki,Stoyan K. Smoukov,Slavka Tcholakova,E. Emily Lin,Jianxin Chen,Gabriele De Canio,Eric Lauga,Nikolai Denkov

DOI: https://doi.org/10.48550/arXiv.2107.10165

2021-07-21

Soft Condensed Matter

Abstract:The design of artificial microswimmers is often inspired by the strategies of natural microorganisms. Many of these creatures exploit the fact that elasticity breaks the time-reversal symmetry of motion at low Reynolds numbers, but this principle has been notably absent from model systems of active, self-propelled microswimmers. Here we introduce a class of microswimmer that spontaneously self-assembles and swims without using external forces, driven instead by surface phase transitions induced by temperature variations. The swimmers are made from alkane droplets dispersed in aqueous surfactant solution, which start to self-propel upon cooling, pushed by rapidly growing thin elastic tails. When heated, the same droplets recharge by retracting their tails, swimming for up to tens of minutes in each cycle. Thermal oscillations of approximately 5 degrees Celsius induce the swimmers to harness heat from the environment and recharge multiple times. We develop a detailed elastohydrodynamic model of these processes and highlight the molecular mechanisms involved. The system offers a convenient platform for examining symmetry breaking in the motion of swimmers exploiting flagellar elasticity. The mild conditions and biocompatible media render these microswimmers potential probes for studying biological propulsion and interactions between artificial and biological swimmers.

Immunization as therapy for recurrent spontaneous abortion: A review and meta‐analysis

All-Aqueous Soft Milli-swimmers

3-D Printed Swimming Microtori for Cargo Transport and Flow Manipulation

Minimal numerical ingredients describe chemical microswimmers's 3D motion

Colloidal Nanosurfactants for 3D Conformal Printing of 2D Van Der Waals Materials.

Rational design and fabrication of versatile active colloidal molecules

Quantitative measurements of non-equilibrium interactions of catalytic microswimmers with dual colloidal tracers

3D‐Printed Light‐Driven Microswimmer with Built‐In Micromotors

Tuning the motility and directionality of self-propelled colloids

Algae-like Artificial Organic Phototactic Micro-swimmers

Semiconductor-Based Microswimmers: Attention to Detail Matters

Reconfigurable Artificial Microswimmers with Internal Feedback

Wafer-Scale Fabrication of Micro- to Nanoscale Bubble Swimmers and Their Fast Autonomous Propulsion by Ultrasound

Microswimmers in Patterned Environments

Janus microswimmers are poor hydrodynamic mixers

Remote control of self-assembled microswimmers

Activity-induced microswimmer interactions and cooperation in one-dimensional environments

3D-Printed Biodegradable Microswimmer for Theranostic Cargo Delivery and Release

Stochastic dynamics of dissolving active particles

Rechargeable self-assembled droplet microswimmers driven by surface phase transitions