Abstract:Waste composition range from simple sugars to complex polysaccharides such as starch, cellulose, and hemicellulose, including more complex sources such as lignin, lipids, and proteins. This composition suggests its use as raw materials that can potentially be valued by different techniques and used as resources for new food additives, leading to economic and environmental benefits. In this work, the extraction and production of microfibrillated cellulose (MFC) as the way forward to valorise agroindustrial residues. The high surface area and aspect ratio, rheological behaviour, water absorption and absence of cytotoxic and genotoxic properties of MFC studied in the present study facilitate its use in food applications as stabilizing and texturizer agent. This work has two main goals: The first goal is the production of MFC using a method based on the combination of green chemical and mechanical pre-treatment of the feedstock followed by a disintegration process of the cellulose obtained from agroindustrial residues. The results revealed that the different MFC obtained have a quality comparable with commercial MFC, which is reported by the determination of the Quality Index (QI). QI values between 50 and 63 are obtained with the agroindustrial subproducts tested. The MFC was also characterized using several techniques such as FTIR, SEM and TGA. The second goal is the MFC validation as thickener agent in food (mayonnaise, peach nectar, strawberry syrup and puree apple). First, a rheological study was carried out to observe the MFC thixotropic behaviour. Second, to evaluate techno-functional properties in-vivo, MFC was compared in terms of functionality with the seven additives commonly used in the industry: tare gum, xanthan gum, guar gum, carrageenan, pectin, agar and gelatine. The results revealed that the sample with 0.1% MFC exhibited a reduced thixotropic behavior compared to the other samples (1, 1.5 and 2%). Compared with commercial gums, MFC exhibits the highest water activity (0.87 ± 0.00) and the most alkaline pH value (10.10 ± 0.01). In the in vivo dietary models, thermal stabilization values after 15 min at 85 °C indicate that gums perform better than MFC and carrageenan in mayonnaise stabilization. This study also reveals that gums are more effective in stabilizing the cloud, while gelatine or MFC-containing samples exhibit a higher cloud volume after 30 min of stabilization. Notably, the cloud suspension of peach nectar with MFC-containing samples compares favorably to the control without gums (20 to 40%). This comprehensive study underscores the potential of MFC as a versatile and eco-friendly alternative in food applications, aligning with the broader goals of sustainable waste management and environmentally conscious practices in the agroindustrial sector.

From unavoidable food waste to advanced biomaterials: microfibrilated lignocellulose production by microwave-assisted hydrothermal treatment of cassava peel and almond hull

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Mild Alkaline Pretreatment for Isolation of Native-Like Lignin and Lignin-Containing Cellulose Nanofibers (LCNF) from Crop Waste

A low-cost environmentally friendly approach to isolate lignin containing micro and nanofibrillated cellulose from Eucalyptus globulus bark by steam explosion

High Added Value Products from Agroindustrial Residues: Study on Microfibrillated Cellulose for Food Applications

High-Lignin-Containing Cellulose Nanofibrils from Date Palm Waste Produced by Hydrothermal Treatment in the Presence of Maleic Acid

Isolation and characterization of microfibrillated cellulose and nanofibrillated cellulose with "biomechanical hotspots"

Changes of hydrogen bonding and aggregation structure of cellulose fiber due to microwave-assisted alkali treatment and its impacts on the application as fluff pulp

Holocellulosic Fibers and Nanofibrils Using Peracetic Acid Pulping and Sulfamic Acid Esterification

The effect of chemical composition on microfibrillar cellulose films from wood pulps: water interactions and physical properties for packaging applications

Mechanical Strength, Thermal Stability, and Hydrophobicity of Fiber Materials after Removal of Residual Lignin

Isolation of Cellulose Nanofibers From Sunflower Seed Husks via Formic Acid Hydrolysis

Highly efficient and green micro/nano cellulose preparation with micro-nano bubbles from mild alkali pretreated bagasse

Defibrillation and functionalization of cellulose fibers from different sources in one-step via a mechanochemical method

High-Consistency Mechano-Enzymatic Fibrillation of Bamboo Pulp Fibers to Produce Precursors for Highly Fibrillated Cellulose and Dense Films with Multifunctionalities

Producing Cellulose Microfibrils at a High Solid Content with and without Mechanical or Enzymatic Pretreatment

Microwave-Assisted Production of Defibrillated Lignocelluloses from Blackcurrant Pomace via Citric Acid and Acid-Free Conditions

The Hy-MASS Concept: Hydrothermal Microwave Assisted Selective Scissoring of Cellulose for in Situ Production of (meso)porous Nanocellulose Fibrils and Crystals

The comparison of hydrothermal, ultrasonication and microwave assisted alkalization of cellulose from Borassus flabellifer fruit husk

A one-step process to produce high-crystallinity cellulose microfibrils from microwave irradiation of natural fiber waste