Abstract:Geophysical methods can be used to remotely characterize contaminated sites and monitor in situ enhanced remediation processes. We have conducted one sandbox experiment and one contaminated field investigation to show the robustness of electrical resistivity tomography and self-potential (SP) tomography for these applications. In the sandbox experiment, we injected permanganate in a trichloroethylene (TCE)-contaminated environment under a constant hydraulic gradient. Inverted resistivity tomograms are able to track the evolution of the permanganate plume in agreement with visual observations made on the side of the tank. Self-potential measurements were also performed at the surface of the sandbox using non-polarizing Ag-AgCl electrodes. These data were inverted to obtain the source density distribution with and without the resistivity information. A compact horizontal dipole source located at the front of the plume was obtained from the inversion of these self-potential data. This current dipole may be related to the redox reaction occurring between TCE and permanganate and the strong concentration gradient at the front of the plume. We demonstrate that time-lapse self-potential signals can be used to track the kinetics of an advecting oxidizer plume with acceptable accuracy and, if needed, in real time, but are unable to completely resolve the shape of the plume. In the field investigation, a 3D resistivity tomography is used to characterize an organic contaminant plume (resistive domain) and an overlying zone of solid waste materials (conductive domain). After removing the influence of the streaming potential, the identified source current density had a magnitude of 0.5 A m(-2). The strong source current density may be attributed to charge movement between the neighboring zones that encourage abiotic and microbially enhanced reduction and oxidation reactions. In both cases, the self-potential source current density is located in the area of strong resistivity gradient (C) 2015 Elsevier B.V. All rights reserved.

Environmental characterization of an industrially contaminated area by tetrachloroethylene using the resistive-capacitive method

Electrokinetic remediation of petroleum hydrocarbon contaminated soil (I)

Application of induced polarization and resistivity to the environmental investigation of an old waste disposal area

Investigation of the contamination behavior in water and soil of an inactive dump from chemical analysis and geophysical method

Assessment of an urban waste disposal contamination using chemical analysis and DC resistivity

Characterization of Contaminated Site Using Electrical Resistivity and Induced Polarization Methods

Electrochemical transformation of an aged tetrachloroethylene contamination in realistic aquifer settings

Sustainable approaches for brownfield revitalization and rehabilitation: a case in São Paulo

Dynamic Monitoring of In-situ Chemical Oxidation for Remediation of Hydrocarbon Contamination with Electrical Resistivity Tomography

Magnetic signatures of a creosote oil contaminated site: case study in São Paulo, Brazil

Multi-method assessment of the intrinsic biodegradation potential of an aquifer contaminated with chlorinated ethenes at an industrial area in Barcelona (Spain)

Resistivity and Self-Potential Tomography Applied to Groundwater Remediation and Contaminant Plumes: Sandbox and Field Experiments

Site Investigation Of A Pesticide Contaminated Factory Based On In-Situ Resistivity Piezocone Tests In Southeastern China

Remediation and Stimulation of Selected Chlorinated Organic Solvents in Unsaturated Soil by a Specific Enhanced Electrokinetics

Probabilistic Identification of Contaminated Soils Using Resistivity Piezocone Penetration Tests

Monitoring of In-Situ Chemical Oxidation for Remediation of Diesel-Contaminated Soil with Electrical Resistivity Tomography

Post-remediation geophysical assessment: Investigating long-term electrical geophysical signatures resulting from bioremediation at a chlorinated solvent contaminated site

Multi-tracer analysis to estimate the historical evolution of pollution in riverbed sediment of subtropical watershed, the lower course of the Piracicaba River, São Paulo, Brazil

Laboratory Study Of The Detection Of Metal Contaminated Clay Layer Using Four-Electrode Resistivity Cone

3D electrical resistivity tomography geophysical monitoring of the effectiveness of an environmental remediation system by pure oxygen injection

APPLICATION OF RESISTIVITY CPTU IN EVALUATION OF CONTAMINATION SITE FOR PESTICIDE FACTORY