Abstract:Plasmonic photocatalysts represented by gold nanoparticle (NP)-loaded titanium( IV ) oxide (Au/TiO 2 ) can be promising solar-to-fuel converters by virtue of their response to visible-to-near infrared light. Hitherto, Au/rutile (R)-TiO 2 has been recognized as exhibiting photocatalytic activity higher than that of Au/anatase (A)-TiO 2 . Herein, we demonstrate that the high potential of A-TiO 2 as the Au NP support can be brought out through atomic level interface control. Faceting of Au NPs is induced by a heteroepitaxial junction on an A-TiO 2 (001) nanoplate array (Au/A-TiO 2 NPLA). Photoexcitation towards the Au/A-TiO 2 NPLA electrode generates current for the water oxidation reaction at λ < 900 nm with a maximum efficiency of 0.39% at λ = 600 nm, which is much larger than the values reported so far for the usual electrodes. The striking activity of the Au/A-TiO 2 NPLA electrode was rationalized using a potential-dependent Fowler model. This study presented a novel approach for developing solar-driven electrodes for green and sustainable fuel production.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the performance of gold - nanoparticle - loaded titanium dioxide (Au/TiO₂) photo - electrodes in the process of photocatalytic water splitting for hydrogen production. Specifically, researchers improve the photocatalytic activity of photo - electrodes in the visible - to - near - infrared light region by forming gold nanoparticles with specific shapes on titanium dioxide nanoplate arrays of specific crystal planes, thereby achieving more efficient conversion of solar energy into fuel. ### Background and Problem Traditional gold - nanoparticle - loaded titanium dioxide (Au/TiO₂) photo - electrodes show certain photocatalytic activity in the photocatalytic water splitting reaction, but their efficiency is usually low. Especially in the visible - to - near - infrared light region, the incident photon - to - current conversion efficiency (IPCE) of these photo - electrodes is usually less than 0.03%. This low efficiency is mainly attributed to the following factors: 1. **Shape and Size of Gold Nanoparticles**: The shape and size of gold nanoparticles have a significant impact on photocatalytic activity. Smaller - sized gold nanoparticles (<10 nm) can enhance the local surface plasmon resonance (LSPR) effect, thereby increasing the light absorption efficiency. 2. **Interface Coupling**: The strength of electron coupling between gold nanoparticles and titanium dioxide will affect the charge separation and transfer processes. Strong interface coupling can accelerate the photo - induced interface electron transfer and extend the responsive light wavelength. 3. **Charge Transfer**: The hole transfer speed in n - type semiconductor photo - anodes is slow, which limits the photocatalytic activity. By optimizing the material structure, the charge transfer performance can be improved. ### Research Methods To improve the performance of Au/TiO₂ photo - electrodes, researchers adopted the following methods: 1. **Heteroepitaxial Growth**: By forming gold nanoparticles with specific crystal planes on titanium dioxide nanoplate arrays (A - TiO₂ NPLA) and using the heteroepitaxial growth (HEPI) technique, the gold nanoparticles are made to have specific shapes (such as truncated octahedral shape). 2. **Material Synthesis**: Titanium dioxide nanoplate arrays with dominant (001) crystal planes were synthesized by the hydrothermal method, and gold nanoparticles were loaded by the deposition - precipitation method and the chemical reduction method. 3. **Characterization and Testing**: Materials were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X - ray diffraction (XRD), Raman spectroscopy, etc., and their photocatalytic activities were evaluated by photoelectrochemical tests. ### Main Findings 1. **Shape of Gold Nanoparticles**: Truncated octahedral (t - Oh) gold nanoparticles were formed on A - TiO₂ nanoplate arrays, and the size of these particles is less than 10 nm. 2. **Photocatalytic Activity**: The photocatalytic activity of t - Oh Au/A - TiO₂ NPLA electrodes in the visible - to - near - infrared light region is much higher than that of hemispherical (HS) Au/A - TiO₂ NPLA and t - Oh Au/R - TiO₂ nanowire array (NWA) electrodes. At a wavelength of 600 nm, the maximum IPCE of t - Oh Au/A - TiO₂ NPLA electrodes reaches 0.39%, while the IPCE of other electrodes is 0.18% and 0.06% respectively. 3. **Mechanism Explanation**: Through finite - difference time - domain (FDTD) simulation and photoelectrochemical impedance spectroscopy (PECIS) analysis, researchers found that the high activity of t - Oh Au/A - TiO₂ NPLA electrodes is mainly attributed to: - **Enhanced Local Surface Plasmon Resonance (LSPR)**: t - Oh Au NPs generate a strong local electric field at the interface, enhancing light absorption. - **Interface Coupling**: The strong interface coupling between gold nanoparticles and titanium dioxide promotes charge separation and transfer. - **Charge Transfer**: The electron mobility of A - TiO₂ is high, which is beneficial for charge transfer to the collection electrode. ### Conclusion By forming gold nanoparticles with specific shapes on A - TiO₂ nanoplate arrays, researchers have successfully improved the photocatalytic activity of Au/TiO₂ photo - electrodes, significantly increasing their incident photon - to - current conversion efficiency in the visible - to - near - infrared light region. This research provides new ideas for the development of efficient and green solar energy conversion systems.

Efficient plasmonic water splitting by heteroepitaxial junction-induced faceting of gold nanoparticles on an anatase titanium(IV) oxide nanoplate array electrode

Multilayered Plasmonic Heterostructure of Gold and Titania Nanoparticles for Solar Fuel Production

Synergistic Effect of Plasmonic Gold Nanoparticles Decorated Carbon Nanotubes in Quantum Dots/TiO2 for Optoelectronic Devices

Enhanced Full-Spectrum Water Splitting by Confining Plasmonic Au Nanoparticles in N-doped TiO2 Bowl Nanoarrays

Surface plasmon-driven photoelectrochemical water splitting of a Ag/TiO2 nanoplate photoanode

Steering Plasmonic Hot Electrons to Realize Enhanced Full-Spectrum Photocatalytic Hydrogen Evolution

Plasmon-promoted electrocatalytic water splitting on metal-semiconductor nanocomposites: the interfacial charge transfer and the real catalytic sites

Interface Manipulation to Improve Plasmon‐Coupled Photoelectrochemical Water Splitting on Α‐fe2o3 Photoanodes

Nanoparticle Superlattices As Efficient Bifunctional Electrocatalysts for Water Splitting.

UV and Visible Light Photocatalytic Activity of Au/TiO2 Nanoforests with Anatase/Rutile Phase Junctions and Controlled Au Locations

Enhanced Photoelectrochemical Performance with Plasmon-Induced Hot Electron Injection of Gold Nanoparticle

Piezoelectric‐Effect‐Enhanced Full‐Spectrum Photoelectrocatalysis in P–n Heterojunction

Plasmon‐Induced Hot Carrier Separation across Dual Interface in Gold–Nickel Phosphide Heterojunction for Photocatalytic Water Splitting

Plasmonic Au–TiO2 interactions for augmented photocatalytic hydrogen evolution

Enhanced photocatalytic water splitting of TiO 2 by decorating with facet-controlled Au nanocrystals

Pt@TiO2- Au Nanocorrugated STUCTURE for Visible-Light Active Photocatalysis

Coupling surface plasmon resonance of gold nanoparticles with slow-photon-effect of TiO2 photonic crystals for synergistically enhanced photoelectrochemical water splitting

Surface Plasmon Enhanced Photocatalysis of Au/Pt-decorated TiO2 Nanopillar Arrays

Photocatalytic Water Oxidation Directly Using Plasmonics from Single Au Nanowires without the Contact with Semiconductors

Plasmonic coupling enhancement of core-shell Au@Pt assemblies on ZnIn2S4 nanosheets towards photocatalytic H2 production

(Invited) Functional Nanostructures for Highly Efficient Photoelectrochemical Water Splitting