Abstract:Biomass is one of the promising alternative materials to solve the energy and environmental crisis. Fast pyrolysis is one of the most economical and commercially realizable technologies to convert biomass to useable fuels and chemicals. To improve the liquid products, co-pyrolysis with polypropylene (PP) over a mesoporous catalyst MCM-41 was studied in this paper. Thermogravimetry Fourier transform infrared spectroscopy (TG-FTIR) and pyrolysis gas chromatography mass spectrometry (Py-GC MS) were used as the main analysis methods to study the mass loss and detailed products of the co-pyrolysis. The mass loss, main functional groups, and identified products of pyrolysis of cellulose, PP, and their mixture were analyzed and discussed. All of the TG, FTIR, and Py-GC MS data show that there is no significant synergism between cellulose and PP when simply mixing them, although the C/H-eff of the mixture increases from 0 to 1.3. However, the addition of MCM-41 bring significant synergism. The TG and differential thermogravimetry (DTG) data show that the co-pyrolysis with MCM-41 shifts the decomposition of PP to a lower temperature, which provides more overlap between cellulose and PP in the range of 300-400 degrees C. According to the FTIR spectra, CO, CO2, and carbonyl are also produced in the peak for pyrolysis of PP for the mixture together with MCM-41, which indicates the intermolecular synergetic reaction. Furthermore, the results from Py-GC MS show that olefins (43.9%), oxygenated compounds (24.8%, mainly alcohols), and aromatics (17.8%) are the main products of co-pyrolysis of cellulose and PP in the presence of MCM-41, while oxygenated compounds (82.2%, mainly saccharides), olefins (4.7%), and aromatics (1.1%) will be the main products without the catalyst. Olefins and alcohols are Much more than the calculated value, which is the main result of synergism. Alcohols are mainly produced from the radical from the cracking of PP combined with the hydroxyl radical produced from decomposition of cellulose. Olefins are produced from the interaction reaction (carbenium ion reaction and beta-scission) between the primary products of cellulose and the hydrocarbon pool reaction of primary products of cellulose and PP. The results of this study enhance the understanding of co-pyrolysis of cellulose and PP in the presence of MCM-41 and provide the possible pathway of modifying the special pyrolysis products in catalytic pyrolysis of biomass with polymers.

A comprehensive study on product properties and synergistic effects of co-pyrolysis of antibiotic mycelium residues and agricultural and forestry wastes

Synergistic effect on thermal behavior and product characteristics during co-pyrolysis of biomass and waste tire: Influence of biomass species and waste blending ratios

Synergistic effects and products distribution during Co-pyrolysis of biomass and plastics

Co-Pyrolysis of Mushroom Residue Blended with Pine Sawdust/Wheat Straw for Sustainable Utilization of Biomass Wastes: Thermal Characteristics, Kinetic/Thermodynamic Analysis, and Structure Evolution of Co-Pyrolytic Char

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Co-pyrolysis of sewage sludge and pinewood sawdust: the synergistic effect and bio-oil characteristics

Physicochemical synergistic effect of microwave-assisted Co-pyrolysis of biomass and waste plastics by thermal degradation, thermodynamics, numerical simulation, kinetics, and products analysis

Influence of Char Intermediates on Synergistic Effects During Co-Pyrolysis of Pinewood and Polycarbonate

Review on synergistic effects during co-pyrolysis of biomass and plastic waste: Significance of operating conditions and interaction mechanism

Investigation on microwave pyrolysis mechanism and synergism of seaweed and rice husk with comprehensive experimental and theoretical study

Synergetic Effect of Co-pyrolysis of Cellulose and Polypropylene over an All-Silica Mesoporous Catalyst MCM-41 Using Thermogravimetry–Fourier Transform Infrared Spectroscopy and Pyrolysis–Gas Chromatography–Mass Spectrometry

Synergetic effects during co-pyrolysis of waste textiles and Ca/Fe-rich industrial sewage sludge: Reaction kinetics and product distribution

The synergistic effect on the product distribution for the co-pyrolysis of tannery wastes

Co-pyrolysis of swine manure and pinewood sawdust: Evidence of cross-interaction of the volatiles and profound impacts on product characteristics

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Synergistic effect of co-pyrolysis of tea seed shells and scrap tyres and product evaluation

Co-pyrolysis of sewage sludge and lignocellulosic biomass: Synergistic effects on products characteristics and kinetics

Co-pyrolysis of different torrefied Chinese herb residues and low-density polyethylene: Kinetic and products distribution

Co-pyrolysis performances, synergistic mechanisms, and products of textile dyeing sludge and medical plastic wastes

Understanding of synergy in non-isothermal microwave-assisted in-situ catalytic co-pyrolysis of rice husk and polystyrene waste mixtures

Synergistic effect during co-pyrolysis of tea seed shell and waste printed circuit board: Thermogravimetric characteristics and operation parameter optimization