3D Printing of Micro- and Nanoscale Bone Substitutes: A Review on Technical and Translational Perspectives
Lijia Cheng,Shoma Suresh K,Hongyan He,Ritu Singh Rajput,Qiyang Feng,Saravanan Ramesh,Yuzhuang Wang,Sasirekha Krishnan,Serge Ostrovidov,Gulden Camci-Unal,Murugan Ramalingam
DOI: https://doi.org/10.2147/IJN.S311001
IF: 7.033
2021-06-25
International Journal of Nanomedicine
Abstract:Lijia Cheng, 1 Shoma Suresh K, 2 Hongyan He, 1 Ritu Singh Rajput, 2 Qiyang Feng, 1 Saravanan Ramesh, 2 Yuzhuang Wang, 1 Sasirekha Krishnan, 2 Serge Ostrovidov, 3 Gulden Camci-Unal, 4 Murugan Ramalingam 2 1 School of Basic Medicine, Chengdu University, Chengdu, 610106, People's Republic of China; 2 Biomaterials and Organ Engineering Group, Centre for Biomaterials, Cellular, and Molecular Theranostics, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, Tamil Nadu, 632014, India; 3 Department of Radiological Sciences, University of California Los Angeles, Los Angeles, CA, 90095, USA; 4 Department of Chemical Engineering, University of Massachusetts Lowell, Lowell, MA, 01854, USA Correspondence: Lijia Cheng School of Basic Medicine, Chengdu University, Chengdu, 610106, People's Republic of China Email Murugan Ramalingam Biomaterials & Organ Engineering Group, Centre for Biomaterials, Cellular, and Molecular Theranostics, Vellore Institute of Technology, Vellore, Tamil Nadu, 632014, India Tel +91-416-220-2736 Fax +91-416-2243092 Email Recent developments in three-dimensional (3D) printing technology offer immense potential in fabricating scaffolds and implants for various biomedical applications, especially for bone repair and regeneration. As the availability of autologous bone sources and commercial products is limited and surgical methods do not help in complete regeneration, it is necessary to develop alternative approaches for repairing large segmental bone defects. The 3D printing technology can effectively integrate different types of living cells within a 3D construct made up of conventional micro- or nanoscale biomaterials to create an artificial bone graft capable of regenerating the damaged tissues. This article reviews the developments and applications of 3D printing in bone tissue engineering and highlights the numerous conventional biomaterials and nanomaterials that have been used in the production of 3D-printed scaffolds. A comprehensive overview of the 3D printing methods such as stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), and ink-jet 3D printing, and their technical and clinical applications in bone repair and regeneration has been provided. The review is expected to be useful for readers to gain an insight into the state-of-the-art of 3D printing of bone substitutes and their translational perspectives. Keywords: 3D printing, artificial bone, bone tissue engineering, biomaterials, nanomaterials Graphical Bone and its related disorders represent a majority of chronic diseases in patients over the age of 40 years and still exist as a critical clinical concern. 1 Even though bones possess a limited regeneration capacity, their inability to repair large segmental bone defects remains an unmet clinical challenge. Bone tumor resection, traffic accidents, rarefaction of bone, and osteomyelitis are some of the main reasons that bone injuries. 2 , 3 Annually, more than 2.5 million reconstructive surgery procedures are carried out worldwide in response to these primary causes of bone damage and defects. 4 , 5 Autologous bone grafting has still been considered the "gold standard" in orthopedic trauma for repairing large defective bones. However, the hurdles of autologous bone grafting are the limited availability of autologous bones, the time required to harvest the graft, molding problems, the morbidity of the donor site, graft resorption, and the high risk of fracture. On the other hand, allo- and xeno-grafts face the challenge of insufficient levels of cellularity, immune rejection, and the possibility of disease transmission. 6 These limitations are hampering their extensive use in clinical applications. 7 Hence, it is imperative to develop alternative strategies for the efficient repair of bone. Three-dimensional (3D) printing is an additive manufacturing technology that has recently made advances in the field of tissue engineering for the repair and regeneration of damaged tissues. The 3D printing (3DP) process integrates engineering technology and biological sciences to print scaffolds, often loaded with cells and bioactive growth factors that can be potentially used as replacements for traditional tissue grafts. 8 3D printing technology can transform digital signals into physical objects, via the integrated application of computer-aided design (CAD), computer-aided manu -Abstract Truncated-
pharmacology & pharmacy,nanoscience & nanotechnology