Abstract:Determining the presence of paraquat (PQ) and diquat (DQ) in urine samples through physical and chemical testing is challenging. As PQ and DQ have characteristics such as high molecular polarity and good water solubility, they are difficult to be retained by conventional reversed-phase columns. Most of the methods in the literature use hydrophilic interaction chromatography (HILIC) for the retention of PQ and DQ, but they often require high concentrations of buffer salts as the mobile phase, which increase the contamination of the mass spectrometer. In view of the above problems, a rapid and accurate analysis method was developed for the determination of PQ and DQ residuals in urine samples based on weak cation exchange (WCX) solid-phase extraction (SPE) and ultra performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS) in this study. Urine samples were first diluted with phosphate buffer (pH=6.86) and pretreated using the WCX SPE method. Chromatographic separation was performed on a Syncronis HILIC column (100 mm×2.1 mm, 1.7 μm). An electrospray ion source in the positive (ESI+) mode and full mass-data dependent MS2 (full mass-ddMS2) mode was used for quantification by matrix-matched external standard method. In this study, the concentration of ammonium formate in the mobile phase in the HILIC mode was effectively reduced to 10 mmol/L by the continuous optimization of the chromatographic conditions. MS optimization results indicated that the molecular ion (M+·) of PQ and DQ had the strongest response. In addition, sample pretreatment conditions were also optimized. The obtained results indicated that the hydrophobic polytetrafluoroethylene (PTFE) filter membrane, acetonitrile-water (1∶1, v/v) as a fixing solution, and polypropylene vials were suitable for PQ and DQ analysis. Under the optimal conditions, the linearity of PQ and DQ was good with correlation coefficients (r2) greater than 0.998. The limits of detection (LODs, S/N≥3) and limits of quantification (LOQs, S/N≥10) were 0.2 μg/L and 0.6 μg/L, respectively. Mean spiked recoveries of PQ and DQ at the four spiked levels (1.0, 20.0, 100.0, and 200.0 μg/L) were in the range of 85.8%-101% and 80.3%-86.9%, with the RSDs of 0.8%-5.1% and 0.9%-4.2%. The established method was employed for the analysis and confirmation of PQ and DQ for clinical poisoning cases. In one case, a 23-year-old male who had taken approximately 20 mL of pesticide orally was confirmed as DQ poisoning by the developed method. DQ concentration monitoring of the urine samples was conducted for this case during the clinical treatment process. The patient was successfully discharged from the hospital after five times of blood perfusion and other treatments until the DQ concentration was low in the urine samples. In conclusion, the method developed in this study based on WCX SPE-UPLC-HRMS can be used for the confirmation of poisoning cases and concentration monitoring during clinical treatment, providing strong technical support for clinical precision treatment. The method is rapid, simple, sensitive, and accurate, and it is suitable for the detection of PQ and DQ in urine samples.

Specific recognition of cationic paraquat in environmental water and vegetable samples by molecularly imprinted stir-bar sorptive extraction based on monohydroxylcucurbit[7]uril-paraquat inclusion complex

Surface molecularly imprinted-based matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for highly selective and sensitive direct analysis of paraquat in complicated samples

A Label-Free Electrochemical Aptasensor Based on Zn/Fe Bimetallic MOF Derived Nanoporous Carbon for Ultra-Sensitive and Selective Determination of Paraquat in Vegetables

Hotspots engineering by grafting Au@Ag core-shell nanoparticles on the Au film over slightly etched nanoparticles substrate for on-site paraquat sensing

A water compatible magnetic molecularly imprinted nanocomposite for the class-selective enrichment of quinoxaline-1,4-dioxides in environmental water

Electrochemical sensor for ultrasensitive detection of paraquat based on metal-organic frameworks and para-sulfonatocalix[4]arene-AuNPs composite

Smart, Degradable, and Eco-Friendly Carboxymethyl Cellulose-Caii Hydrogel-Like Networks Gated MIL-101(FeIII) Nanoherbicides for Paraquat Delivery.

Sulfonic acid functionalized hierarchical porous covalent organic frameworks as a SALDI-TOF MS matrix for effective extraction and detection of paraquat and diquat

Magnetic solid phase extraction sorbents using methyl-parathion and quinalphos dual-template imprinted polymers coupled with GC-MS for class-selective extraction of twelve organophosphorus pesticides

Highly Sensitive Electrochemical Detection of Paraquat in Environmental Water Samples Using a Vertically Ordered Mesoporous Silica Film and a Nanocarbon Composite

A rapid and reliable immunochromatographic strip for detecting paraquat poinsoning in domestic water and real human samples

Azocalixarene-Based Supramolecular System for the Detection of Paraquat Via an Improved Indicator Displacement Assay.

Fabrication of carboxyl functionalized microporous organic network coated stir bar for efficient extraction and analysis of phenylurea herbicides in food and water samples

Facile construction of a stable core-shell spherically magnetic polyimide covalent organic framework for efficient extraction of phenylurea herbicides

Multi-templates surface molecularly imprinted polymer for simultaneous and rapid determination of sulfonamides and quinolones in water: effect of carbon-carbon double bond

Selective Extraction of Functional Components Derived from Herb in Plasma by Using a Molecularly Imprinted Polymer Based on 2,2-Bis(hydroxymethyl)butanol Trimethacrylate.

Quinoxaline core-conjugated microporous polymer coating for highly sensitive solid-phase microextraction of phthalate esters in liquid food samples

Computational design and synthesis of molecular imprinted polymers for selective solid phase extraction of sulfonylurea herbicides

Ultrasensitive determination of diquat using a novel nanohybrid sensor based on Super-P nanoparticles dispersed palygorskite nanofibers

[Determination of paraquat and diquat residues in urine samples based on solid-phase extraction and ultra performance liquid chromatography-high resolution mass spectrometry]

Core-shell molecularly imprinted polymer nanospheres for the recognition and determination of hydroquinone.