Abstract:Supported titanium dioxide (TiO2) was investigated for potential application in photocatalytic degradation of dye acid Orange 7 in textile wastewater. Two commercial powder photocatalysts, Degussa (P25) and Precheza (AV01), were immobilized on stainless steel plates of dimensions (75 mm × 25 mm) through Electrophoretic Deposition Process (EPD) from aqueous colloidal suspensions of n-TiO2, c=10 g.L-1 produced in methanol. Two sets of coated layers were prepared - using ultrasonically treated TiO2 colloidal suspensions and without ultrasonic treatment. The prepared coated layers were fitted onto a four-hole photocatalytic reactor operating under batch-mode conditions. As a source of UV light, Sylvania LynxS, 11W UV lamps emitting light of wavelength between 320-400 nm with maximum wavelength at λ=355 nm was used. The current study aimed to evaluate the effect of ultrasonic treatment on the catalyst’s colloidal suspension and electrophoretic deposition loading (mg/cm2) on its surface area on the resultant photocatalytic degradation of dye Acid Orange 7. The photocatalytic degradation of the dye was monitored by changes in dye absorbance for 120 minutes at an interval of 30 minutes. Changes in dye concentration were determined by ultraviolet spectrophotometry at λ = 485 nm. The initial concentration of dye Acid Orange 7 used in the experiments was c=1×10-4 mol. L-1. The findings show that 61.1 % of dye mineralization was achieved after 120 minutes of photocatalytic degradation. The optimum catalytic loading for maximum photocatalytic degradation was determined at 0.75 mg/cm2 for the two commercial powder catalysts - TiO2 (P25/AV01) in ultrasonically treated TiO2 (P25) and non-ultrasonically treated TiO2 (AV01). Ultrasonic treatment of TiO2 (P25) colloidal suspensions before immobilisation positively influenced its photocatalytic activity, whereas ultrasonic treatment negatively affected the photoactivity of TiO2 (AV01). Overall, TiO2 (AV01) proved to be more efficient by 28.6%, compared to TiO2 (P25). The results show the potential application of UV-TiO2 treatment model in the remediation of coloured dye Acid Orange textile wastewater.

The Influence of Dye Stimulation on Etched TiO2/ENR/PVC for Elevating Photocatalytic Activity and Photoelectrochemical Properties

The Crosslinking and Porosity Surface Effects of Photoetching Process on Immobilized Polymer-Based Titanium Dioxide for the Decolorization of Anionic Dye

Photodegradation of an Azo Dye Using Immobilized Nanoparticles of TiO2 Supported by Natural Porous Mineral.

Single-crystalline Rutile TiO2 Nanorod Array on Flexible Ti Substrates for Efficient Photoelectrocatalytic Degradation of Phenol in Water

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

The Enrichment of Photo-Catalysis Via Self-Assembly Perylenetetracarboxylic Acid Diimide Polymer Nanostructures Incorporating TiO2 Nano-Particles

Enhancement of Photoelectric Catalytic Activity of TiO2 Film Via Polyaniline Hybridization

Enhanced Photocatalytic Activity of TiO2 Nanoparticles Immobilized on Porous-Sulfonated Polystyrene Microspheres through Multiple Scattering Process

Photocatalytic Degradation of Dye Acid Orange Seven on Titanium Dioxide Photocatalysts Immobilized on Stainless Steel Coated Layers: Role of Catalyst Loading and Ultrasonic Treatment

Enhanced Effect of Adsorption and Photocatalytics by TiO2 Nanoparticles Embedded Porous PVDF Nanofiber Scaffolds

Enhanced Photoelectrocatalytic Performance for Degradation of Diclofenac and Mechanism with TiO2 Nano-Particles Decorated TiO2 Nano-Tubes Arrays Photoelectrode

A sustainable activated carbon fiber/TiO 2 cathode for the photoelectro-Fenton treatment of pharmaceutical pollutant enalapril

Porphyrin-TiO2 Encapsulated ZIF-8/PAN-derived Porous Carbon Nanofiber Ternary Photocatalyst with Enhanced Photodegradation Efficiency Through Synergistic Effect

Porphyrin-TiO 2 encapsulated ZIF-8/PAN-derived porous carbon nanofiber ternary photocatalyst with enhanced photodegradation efficiency through synergistic effect

Engineering High-Efficient Phosphorus-Doped TiO2 Photocatalyst Employed for a Sophisticated Visible-Light Driven Photocatalytic Coating

Tunable TiO2-BN-Pd nanofibers by combining electrospinning and atomic layer deposition to enhance photodegradation of acetaminophen

Photoelectrocatalytic Degradation of Tetracycline by Highly Effective TiO2 Nanopore Arrays Electrode

Enhanced photoelectrocatalytic degradation of tetracycline using a bifacial electrode of nickel-polyethylene glycol-PbO2//Ti//TiO2-Ag2O

Preparation and Photodegradation Properties of Transition Metal Ion–poly-O-phenylenediamine/tio2/fly-ash Cenospheres by Ion Imprinting Technology

Preparation and Photocatalytic Performance of Sodium Alginate/Polyacrylamide/Polypyrrole-TiO2 Nanocomposite Hydrogels

Effect of TiO2 Nanoparticles on the Surface Morphology and Performance of Microporous PES Membrane