Abstract:The realization of intelligent, self-powered components and devices exploiting the piezoelectric effect at large scale might greatly contribute to improve our efficiency in using resources, albeit a profound redesign of the materials and architectures used in current electronic systems would be necessary. Piezoelectricity is a property of certain materials to generate an electrical bias in response to a mechanical deformation. This effect enables energy to be harvested from strain and vibration modes, and to sustain the power of actuators, transducers, and sensors in integrated networks, such as those necessary for the Internet of Thing. Polymers, combining structural flexibility with lightweight construction and ease of processing, have been largely used in this framework. In particular, the poly(vinylidene fluoride) [PVDF, (CH2CF2) n ] and its copolymers exhibit strong piezoelectric response, are biocompatibile, can endure large strains and can be easily shaped in the form of nanomaterials. Confined geometries, improving crystal orientation and enhancing piezoelectricity enable the fabrication of piezoelectric nanogenerators, which satisfy many important technological requirements, such as conformability, cheap fabrication, self-powering, and operation with low-frequency mechanical inputs (Hz scale). This account reports on piezoelectric polymer nanofibers made by electrospinning. This technique enables the formation of high-aspect-ratio filaments, such as nanowires and nanofibers, through the application of high electric fields (i.e., on the order of hundreds of kV/m) and stretching forces to a polymeric solution. The solution might be charged with functional, organic or inorganic, fillers or dopants. The solution is then fed at a controlled flow rate through a metallic spinneret or forms a bath volume, from which nanofibers are delivered. Fibers are then collected onto metallic surfaces, and upon a change of the collecting geometry, they can form nonwovens, controlled arrays, or isolated features. Nanofibers show unique features, which include their versatility in terms of achievable chemical composition and chemico-physical properties. In addition, electrospinning can be up-scaled for industrial production. Insight into the energy generation mechanism and how the interaction among fibers can be used to enhance the piezoelectric performance are given in this paper, followed by an overview of fiber networks as the active layer in different device geometries for sensing, monitoring, and signal recognition. The use of biodegradable polymers, both natural and synthetic, as critically important building blocks of the roadmap for next-generation piezoelectric devices, is also discussed, with some representative examples. In particular, biodegradable materials have been utilized for applications related to life science, such as the realization of active scaffolds and of electronic devices to be placed in intimate contact with living tissues and organs. Overall, these materials show many relevant properties that can be of very high importance for building next-generation, sustainable energy harvesting, self-rechargeable devices and electronic components, for use in several different fields.

Piezoelectric energy harvesting and dissipating behaviors of polymer-based piezoelectric composites for nanogenerators and dampers

Design of Flexible Piezoelectric Nanocomposite for Energy Harvesters: A Review

Nanosheet‐Doped Polymer Composites with High Intrinsic Piezoelectric Properties for Energy Harvesting

Flexible Energy Harvesting Polymer Composites Based on Biofibril-Templated 3-Dimensional Interconnected Piezoceramics

Enhancement and Function of the Piezoelectric Effect in Polymer Nanofibers

Interface modulated 0-D piezoceramic nanoparticles/PDMS based piezoelectric composites for highly efficient energy harvesting application

Enhanced energy density in piezoelectric PVDF-polymer nanocomposite via multiple mechanism synergetic action

Modulating Energy Harvesting Behavior of PVDF Piezo-Polymer by Incorporation of BCZT Ceramic Filler

Three-dimensional polypyrrole induced high-performance flexible piezoelectric nanogenerators for mechanical energy harvesting

Flexible Composites with Rare-Earth Element Doped Polycrystalline Particles for Piezoelectric Nanogenerators

Electrospun Polyvinylidene Fluoride Nanogenerator with Hydrophobic Properties and Enhanced Energy Harvesting for Wearable and Wireless Sensing

Mitigating the Negative Piezoelectricity in Organic/Inorganic Hybrid Materials for High-performance Piezoelectric Nanogenerators

A piezoelectric fibre composite based energy harvesting device for potential wearable applications

Interface-engineered composite nanofibers for boosting piezoelectric outputs of polymeric nanogenerators

A review on vibration-based piezoelectric energy harvesting from the aspect of compliant mechanisms

Ferroelectric Polymer Nanofibers Reminiscent of Morphotropic Phase Boundary Behavior for Improved Piezoelectric Energy Harvesting

A Review of Ceramic, Polymer and Composite Piezoelectric Materials

The benefits of combining 1D and 3D nanofillers in a piezocomposite nanogenerator for biomechanical energy harvesting

Three-dimensional polymer-nanoparticle-liquid ternary composite for ultrahigh augmentation of piezoelectric nanogenerators

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors