Red pepper drying with a double pass solar air heater integrated with aluminium cans

Zigale Admass,Ayodeji Olalekan Salau,Bimrew Mhari,Ewnetu Tefera

DOI: https://doi.org/10.1038/s41598-024-53563-6

IF: 4.6

2024-02-05

Scientific Reports

Abstract:In this paper, an experimental evaluation of a newly developed flat plate double pass solar air heater combined with aluminum cans for drying red pepper was presented. The proposed solar dryer system was designed, modeled, and evaluated. Solar air heater trials were carried out using the absorber's top and bottom plate and aluminum cans for red pepper drying at Bahir Dar, Ethiopia. To test the solar dryer, 100 pieces of red paper were obtained from the Bahir Dar region of Ethiopia for the purpose of experimentation. Microsoft Excel was used to perform statistical analysis of eleven mathematical models. The results show that the mixed-mode solar greenhouse dryer takes less time to dry red pepper than the open solar dryer. In the midday, the solar insolation reached 973 W/m 2 and the minimum solar insolation was 220 W/m 2 and air is expelled at a rate of 0.0383 kg/s. According to the experimental results, the dryers chamber temperature ranged from 30.9 to 54 °C, while the ambient temperature was between 22.6 and 28.2 °C. The mixed-mode double pass achieves up to 46% and 28% efficiency when used with aluminum can dryers and conventional open sun dryers, respectively. A drying rate of 0.0003395 kg/s was achieved for the open sun dryer system and 0.0000365 kg/s for the mixed mode solar dryer. Using mixed-mode and open-sun solar dryers, the logarithmic model was found to be most effective in explaining the red pepper behavior. Furthermore, a comparison was made between the experimental and predicted moisture ratios through the calculation of the coefficient of determination (R 2 ), the reduced chi-square (X 2 ), and the root mean square error (RMSE). The results show that the logarithmic model achieved the highest value of the correlation coefficient (R 2 ), which was determined to be 0.9978 and 0.9989, while the logarithmic model achieved the lowest value of Chi-square (X 2 ).

multidisciplinary sciences

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the drying efficiency of red peppers, reduce the drying time, and optimize the drying process of red peppers by designing a new type of dual - channel flat - plate solar air heater combined with aluminum cans. Specifically, the research aims to:

1. **Improve drying efficiency**: Improve the drying efficiency of red peppers by designing and evaluating a new system of a dual - channel flat - plate solar air heater combined with aluminum cans.
2. **Reduce drying time**: Compared with the traditional open - type solar drying system, can the new hybrid - mode solar drying system significantly reduce the drying time of red peppers?
3. **Optimize system performance**: Through experiments and mathematical modeling, evaluate the thermal efficiency, drying rate, moisture loss rate and drying efficiency of the new system to ensure its feasibility in practical applications.
4. **Select the best drying model**: By comparing the goodness - of - fit of different mathematical models (such as \(R^2\), \(\chi^2\) and RMSE), select the model that can best describe the drying behavior of red peppers.

### Main conclusions
1. **Advantage of greenhouse temperature**: The study found that the greenhouse using the new system can reach a better temperature than the flat - plate dryer and the greenhouse dryer alone.
2. **Highest outlet temperature**: Under the condition that the ambient temperature is 28.2°C, the new system can reach the highest outlet temperature of 54°C.
3. **Drying effect**: For 80 kg of red peppers with an initial water content of 79%, using the hybrid - mode greenhouse solar drying system can be dried to a water content of 11% within 50 hours, while using the open - type solar drying system requires 90 hours.
4. **Drying rate**: The drying rate of the hybrid - mode greenhouse solar drying system is 0.0003395 kg/s, while the drying rate of the open - type solar drying system is 0.0000365 kg/s.
5. **Best drying model**: Through the comparison of \(R^2\), \(\chi^2\) and RMSE, it is found that the logarithmic model is the most suitable for describing the drying behavior of red peppers.

### Suggestions for future work
1. **Application of deep - learning methods**: Future research can consider using deep - learning methods to further optimize the selection of drying models and parameter estimation.
2. **System optimization**: Continue to optimize the structure and materials of the system to further improve its thermal efficiency and drying rate.
3. **Practical application testing**: Conduct tests in larger - scale practical application scenarios to verify the long - term stability and reliability of the system.

Through these studies, it is hoped that a breakthrough can be made in red pepper drying technology and more efficient and environmentally - friendly solutions can be provided for agricultural food processing.