Retention tests in the early phase of chronic renal failure. Comparison between non-protein nitrogen, urea, and creatinine.

A. Kasanen,J. Harri

Abstract:

What problem does this paper attempt to address?

Sinusoidal-assisted Synchrosqueezing Transform: Algorithms and Biomedical Applications

Tao Chen,Qian Zheng,Lei Xie,Hongye Su

DOI: https://doi.org/10.1016/j.bspc.2023.105043

IF: 5.1

2023-01-01

Biomedical Signal Processing and Control

Abstract:Intermittent oscillation signals (IOSs) exist widely in biomedical systems. They are always contaminated by various randomnesses like noise and artifacts. Compared with traditional time–frequency analysis (TFA) methods, adaptive TFA methods show significant advantages in separating IOSs. However, these methods are implemented by assuming that the input signal is in a weakly noisy environment and have narrow-band limitation for extracting IOSs. Besides, it is difficult for these methods to alleviate the noise in the gap between time where IOSs happen. Therefore, in this paper, a new method called the sinusoidal-assisted synchrosqueezing transform (SASST) is proposed for separating IOSs in strongly noisy environments. The SASST method locates the IOSs with the aid of a sinusoidal signal. Such a sinusoidal signal fills the energy blank in the gap between time where IOSs happen. This enables the ridge detection approach, which is the necessary tool for mode retrieval of SST-based methods, to focus on the assisted sinusoidal signal rather than noise. Thus, the background noise in the gap is suppressed. Moreover, this sinusoidal-assisted framework can be introduced into any SST-based TFA method. Depending on the characteristics of different biomedical signals, different SST-based methods are chosen to achieve better separation. As a result, SASST is capable of extracting both narrow- and wide-band IOSs in strongly noisy environments. The effectiveness and advantages of the proposed algorithm are verified by both numerical simulations and real-world cases. Even in a strongly noisy environment of −10 dB, SASST achieves output SNR of 12.66 dB and 10.53 dB in narrow- and wide-band simulation, respectively.
A novel systematic absence of cross peaks-based 2D-COS approach for bilinear data

Ran Guo,Xin Zhang,An-Qi He,Fei Zhang,Qing-Bo Li,Zhuo-Yong Zhang,Roma Tauler,Zhen-Qiang Yu,Shigeaki Morita,Yi-Zhuang Xu,Isao Noda,Yukihiro Ozaki,Jin-Guang Wu

DOI: https://doi.org/10.1016/j.saa.2019.05.008

2019-09-05

Abstract:A novel approach to use two-dimensional correlation spectroscopy (2D-COS) to analyze bilinear data is proposed. A phenomenon called Systematic Absence of Cross Peaks (SACPs) is observed in a 2D asynchronous spectrum. Two theorems relevant to SACPs have been derived. The SACP-based 2D-COS method has been successfully applied on analyzing bilinear data from mixed samples (including one model system and two real systems). Implicit isolated peaks can be identified and assigned to different components based on characteristic pattern of SACPs even if the time-related profiles of different components are severely overlapped. Based on the results of SACPs, spectra of pure components can be retrieved. Identification of SACPs can still be achieved in the presence of artifacts. Thus, neither noise nor baseline drift can produce significant influence on the results obtained from the approach described in this paper. We have used several well-established chemometric methods, including N-Findr, VCA, and MCR with various initial settings, on two systems that can be successfully solved using the 2D-COS method. The chemometric methods mentioned above cannot provide correct spectra of pure components because of severe problem of rotational ambiguity derived from severe overlapping of the time-related profiles. Only when the information from SACPs in 2D-COS is used as additional constraints in MCR calculation, correct spectra can be obtained. That is to say, the SACP-based 2D-COS method provides intrinsic information which is crucial in the analysis of chromatographic-spectroscopic and analogous data even if the time-related profiles of different components overlap severely.
Efficient Spectral-Aware Power Supply Noise Analysis for Low-Power Design Verification

Yinuo Bai,Xiaoyu Yang,Yicheng Lu,Dan Niu,Cheng Zhuo,Zhou Jin,Weifeng Liu

DOI: https://doi.org/10.23919/date58400.2024.10546831

2024-01-01

Abstract:The relentless pursuit of energy-efficient electronic devices necessitates advanced methodologies for low-power design verification, with a particular focus on mitigating power supply noise. The challenges posed by shrinking voltage margins in low-power designs lead to a significant demand for rapid and accurate power supply noise simulation and verification techniques. Too large supply noise inevitably results in the raise of supply level, thereby hurting the lower power design target. Spectral methods have demonstrated as a great alternative to produce a sparse sub-matrix with spectral-similarity property as the preconditioner to efficiently reduce the iteration number and solve the linear system for supply noise verification. However, existing methods either suffer from high computational complexity or rely on approximations to reduce computational time. Therefore, a novel approach is needed to efficiently generate high-quality preconditioners. In this paper, we propose a two-stage spectral-aware algorithm to address these challenges. Our approach has three main highlights. Firstly, by introducing spectral-aware weights, we can better assess the priority of edges and construct high-quality spanning trees with the minimum relative condition number. Secondly, by leveraging eigenvalue transformation strategies, we can quickly and accurately recover off-tree edges that are spectrally critical, avoiding time-consuming iterative computations. Thirdly, we proposed a fast computation method to further decrease the computational complexity of the effective resistance. Compared with two SOTA methods, GRASS and feGRASS, our approach demonstrates higher accuracy and efficiency in preconditioner generation (37.3x and 2.13x speedup, respectively) as well as significant improvements in accelerating the linear solver for power supply noise analysis in power grid simulation and other Laplacian graphs (5.16x and 1.70x speedup, respectively).
Improvement of the Sensitivity of the Two-Dimensional Asynchronous Spectroscopy Based on the AOSD Approach by Using a Modified Reference Spectrum

Xiaopei Li,Quan Bi,Shaoxuan Liu,Jing Chen,Shijuan Yue,Yongju Wei,Kun Huang,Ying Zhao,Huizhou Liu,Yanjun Zhai,Yizhuang Xu,Isao Noda,Jinguang Wu

DOI: https://doi.org/10.1016/j.molstruc.2012.08.050

IF: 3.841

2012-01-01

Journal of Molecular Structure

Abstract:In this paper, a modified reference spectrum is utilized to generate 2D asynchronous spectra constructed by using the AOSD approach that is developed in our previous work. Mathematical analysis suggests that it is possible to enhance the intensity of cross peaks by using the modified reference spectrum. Computer simulation indicates that both intensity of cross peaks and signal-to-noise ratio of 2D spectra are improved significantly by adopting the modified reference spectrum. As a result, 2D asynchronous spectrum can be used to probe weak intermolecular interactions under the influence of spectral noise. Furthermore, experiments on acetonitrile/butanone/CCl4 system demonstrate that intensities and signal-to-noise ratio of cross peaks that reflect intermolecular interactions between acetonitrile and butanone can be enhanced remarkably by using the modified reference spectrum.
A New Approach to Recognizing the Correct Pattern of Cross-Peaks from a Noisy 2D Asynchronous Spectrum by Detecting Intrinsic Symmetry Via the Kolmogorov-Smirnov Test.

Linchen Xie,Ran Guo,Limin Yang,Yukihiro Ozaki,Isao Noda,Yizhuang Xu,Kun Huang

DOI: https://doi.org/10.1039/d2cp05350k

2023-01-01

Abstract:The characteristic cluster pattern of cross-peaks in a 2D asynchronous spectrum provides an effective way to reveal the specific physicochemical nature of subtle spectral changes caused by intermolecular interactions. However, the inevitable presence of noise in the 1D spectra used to construct a 2D asynchronous spectrum is significantly amplified, which poses a serious challenge in identifying the correct cluster pattern of the cross-peaks. While mirror symmetry occurs in some types of cross-peaks, it does not occur in other types. The Kolmogorov-Smirnov test provides a statistical means to check whether the mirror symmetry exists or not between a pair of cross-peaks covered by heavy noise. Thus, different types of cross-peak clusters can be distinguished by excavating intrinsic spectral features from the noisy 2D asynchronous spectrum. The effectiveness of this approach in investigating the nature of intermolecular interactions was showcased in both a simulated model system and a real artemisinin/N-methyl pyrrolidone system.
A Preliminary Study on Constructing a High-Dimensional Asynchronous Spectrum to Analyze Bilinear Data.

Ran Guo,Xin Zhang,Fei Zhang,Zhuo-Yong Zhang,Zhen-Qiang Yu,Yi-Zhuang Xu,Isao Noda,Yukihiro Ozaki

DOI: https://doi.org/10.1016/j.saa.2019.03.008

2019-01-01

Abstract:A novel approach to constructing high-dimensional asynchronous spectra (nD-Asyn) is proposed. Three theorems relevant to 1D slices of nD-Asyn are revealed. nD-Asyn is used to analyze bilinear data from mixtures containing multiple components obtained via hyphenated techniques. The spectral contribution of different components can be removed in a stepwise manner by increasing the dimensions of asynchronous spectra. As a result, the spectra of different components can be faithfully recovered even if the time-related profiles of different components severely overlap. Moreover, correct results can still be obtained via the nD-Asyn even if a considerable level of noise and baseline drift are present. The nD-Asyn approach is compared with MCR-ALS using different constraints in analyzing the data for a simulated and also for a real system. The nD-Asyn produced correct spectrum of every component. Only when complete constraints obtained from nD-Asyn method is utilized in the MCR-ALS calculation, correct spectra of all the components can be obtained. Thus, nD-Asyn can be used alone or in conjunction with MCR-ALS to analyze bilinear data containing contributions of multiple components.
Sample-Sample Correlation Asynchronous Spectroscopic Method Coupled with Multivariate Curve Resolution-Alternating Least Squares to Analyze Challenging Bilinear Data.

Ran Guo,Xin Zhang,An-Gi He,Zhen-Qiang Yu,Xiao-Feng Ling,Yi-Zhuang Xu,Isao Noda,Yukihiro Ozaki,Jin-Guang Wu

DOI: https://doi.org/10.1021/acs.analchem.9b04730

IF: 7.4

2019-01-01

Analytical Chemistry

Abstract:An approach to construct a secondary asynchronous spectrum via sample-sample correlation (SASS) is proposed to analyze bilinear data from hyphenated spectroscopic experiments. In SASS, bilinear data is used to construct a series of two-dimensional (2D) sample-sample correlation spectra. Then a vertical slice is extracted from each 2D sample-sample correlation spectrum so that a secondary 2D asynchronous spectrum is constructed via these slices. The advantage of SASS is demonstrated by a model system with the following challenging situations: (1) Temporal profiles of different components severely overlap, making spectra of pure components difficult to directly obtain from either original bilinear data or multivariate curve resolution-alternating least squares (MCR-ALS) with non-negativity and unimodality constraints. (2) Every peak in the spectra of the eluted samples contains contributions from at least two components. Hence, two-dimensional correlation spectroscopy (2D-COS) and n-dimensional (nD) asynchronous spectroscopic method developed in our previous work, which previously worked so well, are now invalid. SASS managed to reveal different groups of systematic absences of cross peaks (SACPs) that reflect the lack of spectral contributions of different components at different regions in the second asynchronous spectrum. Spectra of different components can still be faithfully retrieved via MCR-ALS calculation using constraints revealed by different groups of SACPs. The results demonstrate that implicit but intrinsic information revealed by SASS is indispensable in solving challenging bilinear data as the model system. We applied SASS on two real-world examples from thermogravimetry-Fourier transform infrared spectroscopy (TG-FT-IR) experiments of mixtures (H2O/HOD/D2O and H2O/isopropanol/pyridine). FT-IR spectra of different components were successfully recovered. Moreover, FT-IR spectrum of HOD, which is difficult to obtain, was successfully extracted. SASS can be applied in the analysis of gaseous mixtures from TG-FT-IR experiment and a combination of quantum cascade lasers with substrate-integrated hollow waveguides in environmental monitoring and biomedical diagnosis. Furthermore, SASS is also useful in various advanced hyphenated spectroscopic experiments.
Spectrum Sensing with Small-Sized Data Sets in Cognitive Radio: Algorithms and Analysis.

Feng Lin,Robert C. Qiu,James Paul Browning

DOI: https://doi.org/10.1109/tvt.2014.2321388

IF: 6.8

2015-01-01

IEEE Transactions on Vehicular Technology

Abstract:Spectrum sensing is a fundamental component of cognitive radio (CR). How to promptly sense the presence of primary users (PUs) is a key issue to a CR network. The time requirement is critical in that violating it will cause harmful interference to the PU, leading to a system-wide failure. The motivation of this paper is to provide an effective spectrum sensing method to detect PUs as soon as possible. In the language of streaming-based real-time data processing, short time means small data. In this paper, we propose a cumulative spectrum sensing method dealing with limited sized data. A novel method of covariance matrix estimation is utilized to approximate the true covariance matrix. The theoretical analysis is derived based on McDiarmid's concentration inequalities and random matrix theory to support the claims of detection performance. Comparisons between the proposed method and other traditional approaches, judged by the simulation using a captured digital TV (DTV) signal, show that this proposed method can operate either using smaller data or working under a lower signal-to-noise ratio (SNR) environment.
Two-dimensional Asynchronous Spectrum with Auxiliary Cross Peaks in Probing Intermolecular Interactions

Xiaopei Li,Anqi He,Kun Huang,Huizhou Liu,Ying Zhao,Yongju Wei,Yizhuang Xu,Isao Noda,Jinguang Wu

DOI: https://doi.org/10.1039/c5ra16062f

IF: 4.036

2015-01-01

RSC Advances

Abstract:A new approach called “asynchronous spectrum with auxiliary peaks (ASAP)” is proposed for generating a 2D asynchronous spectrum to investigate the intermolecular interaction between two solutes (P and Q) dissolved in the same solution.
S CA: A Sparse Strip Spectral Correlation Analyzer

Carol Jingyi Li,Richard Rademacher,David Boland,Craig T. Jin,Chad M. Spooner,Philip H.W. Leong

DOI: https://doi.org/10.1109/lsp.2024.3364062

2024-03-02

IEEE Signal Processing Letters

Abstract:The spectral correlation density (SCD) is widely used to characterize cyclostationary signals and the strip spectral correlation analyzer (SSCA) is commonly used to estimate the SCD. Although the SSCA utilizes the fast Fourier transform (FFT) for computational efficiency, its real-time implementation still poses challenges as large input sizes are often involved. In this work, we present a sparse strip spectral correlation analyzer (S CA) based on the sparse fast Fourier transform (SFFT). The S CA approach involves computing a sparse, downsampled channel-data product (CDP) which is then passed to a modified SFFT implementation to obtain the spectral density. For an input of length 2 million samples, the S CA is 30× faster than the conventional SSCA.

engineering, electrical & electronic
Epidermal growth factor and proliferation in rat hepatocytes in primary culture isolated at different times after partial hepatectomy.

A. Francavilla,P. Ove,L. Polimeno,C. Sciascia,M. Coetzee,T. Starzl

IF: 11.2

1986-03-01

Cancer Research

Abstract:Primary hepatocyte cultures have been prepared from normal adult rat liver and from rat liver at 4, 8, 12, 24, and 48 h following partial hepatectomy (removal of 70% of the liver). Cells were maintained in minimal essential medium alone or supplemented with hormones. Comparing DNA synthesis in normal adult rat hepatocytes with DNA synthesis in hepatocytes isolated from regenerating livers, we found with minimal essential medium alone little DNA synthesis in normal adult rat hepatocytes and in hepatocytes isolated 4, 8, or 12 h after 70% hepatectomy. In hepatocytes isolated 24 h after partial hepatectomy, however, the incorporation of [3H]thymidine was 3 times the rate of normal hepatocytes. The addition of insulin to minimal essential medium had minimal effect on DNA synthesis in all hepatocytes. Addition of epidermal growth factor alone or in combination with insulin resulted in a dramatic increase in DNA synthesis in hepatocytes from regenerating rat liver. Increased incorporation was detectable as early as 4 h after partial hepatectomy and reached a maximum at 24 h after the operation. Results obtained with [3H]thymidine incorporation were confirmed by autoradiography and by direct DNA determinations in hepatocyte cultures. Epidermal growth factor binding to the hepatocytes was determined and agreed with previously reported binding studies. Binding of epidermal growth factor in hepatocytes isolated at 4 h after partial hepatectomy was the same as in normal hepatocytes but was undetectable in hepatocytes isolated from rats at 12 and 24 h after partial hepatectomy.
A Convex Projections Approach to Spectral Analysis.

Yang-Ming Zhu,Zhi-Zhong Wang,Yu Wei

DOI: https://doi.org/10.1109/78.295180

1994-01-01

Abstract:The projection onto convex sets (POCS) method is applied to the classical problem of estimating a power spectrum given values of the autocorrelation function (ACF). This new method can use any number of linear and/or nonlinear constraints on the spectrum to be estimated. The measured ACF constraint, the amplitude limit constraint, and the reference spectrum constraint are introduced, and the corresponding projection operators are established. Computer simulation results indicate that the POCS spectral analysis performs well.< >
[Influence of Concentration Sequence on the Signal-to-Noise Ratio of Cross Peaks of 2D Asynchronous Spectra Generated by Using the DAOSD Approach].

Zhang Jin,Guo Ran,Kang Ting-guo,He An-qi,Weng Shi-fu,Xia Jin-ming,Ling Xiao-feng,Xu Yi-zhuang,Wu Jin-guang

DOI: https://doi.org/10.3964/j.issn.1000-0593(2015)05-1193-06

2015-01-01

Abstract:In the present work, computer simulation was performed on a model chemical system where two solutes (denoted as P and Q, respectively) are dissolved in the same solution. Under intermolecular interaction between P and Q, part of P undergoes subtle structural variation and converts into U while part of Q converts into V. The strength of intermolecular interaction can be characterized by the corresponding equilibrium constant K. Our preliminary studies indicate that the S/N ratio of cross peak increases considerably as n increases. Moreover, the S/N ratio of the cross peak from the asynchronous spectra can be improved significantly when the suitable concentrations of P and Q are adopted. This work is helpful for a selection of suitable concentration sequence to maximize S/N ratio of cross peaks in the 2D asynchronous spectra generated by using the DAOSD approach proposed in our previous study so that weak intermolecular interaction can be probed.
Patterns of Cross Peaks in 2d Synchronous Spectrum Generated by Using Orthogonal Sample Design Scheme

Jing Chen,Chengfeng Zhang,Huizhen Li,Yufeng Liu,Weihong Li,Yizhuang Xu,Jinguang Wu,Isao Noda

DOI: https://doi.org/10.1016/j.molstruc.2008.01.052

IF: 3.841

2008-01-01

Journal of Molecular Structure

Abstract:A computer simulation is applied on a model chemical system to study patterns of cross peaks in 2D synchronous spectrum generated by using orthogonal sample design scheme. Variations on different spectral parameters, such as peak position, bandwidth, and absorptivity, caused by intermolecular interactions result in rich and complex behavior in 2D synchronous spectrum. Subtle spectral variations that are hard to be observed in 1D spectra can be clear observed in 2D synchronous spectra. The results suggest that the cross peaks in 2D synchronous spectrum generated by using orthogonal sample design (OSD) can act as a resolution enhancement tool that can differentiate highly overlapping bands.
A contention-based wideband DSA algorithm with asynchronous cooperative spectrum sensing.

Chunxing Jiang,Chunxiao Jiang,Norman C. Beaulieu

DOI: https://doi.org/10.1109/GLOCOM.2013.6831216

2013-01-01

Abstract:In order to mitigate the problem of crowded radio spectrum, dynamic spectrum access (DSA) has become the solution and a research focal point. The number of works in wideband spectrum sensing is dramatically increasing recently due to its importance in cognitive radio (CR) networks. Most works assume that secondary users (SUs) are synchronous with the primary users' (PUs) network. However, in many practical systems the SUs will have no information about the PUs' communication protocols. Furthermore, it is also possible that communications among PUs are not based on synchronous operation. In order to address such problems, a contention-based wideband DSA algorithm with asynchronous cooperative spectrum sensing (CSS), called the DySac, is proposed. In this scheme, the SUs need not maintain synchronism with the PUs, and the SUs who intend to access the primary network compete among each other for available channels. Performance analysis and simulations are conducted to evaluate the proposed DySac.
Sample–Sample Correlation Asynchronous Spectroscopic Method Coupled with Multivariate Curve Resolution-Alternating Least Squares To Analyze Challenging Bilinear Data

Ran Guo,Xin Zhang,An-Qi He,Zhen-Qiang Yu,Xiao-Feng Ling,Yi-Zhuang Xu,Isao Noda,Yukihiro Ozaki,Jin-Guang Wu

DOI: https://doi.org/10.1021/ACS.ANALCHEM.9B04730

IF: 7.4

2020-01-01

Analytical Chemistry

Abstract:An approach to construct a secondary asynchronous spectrum via sample–sample correlation (SASS) is proposed to analyze bilinear data from hyphenated spectroscopic experiments. In SASS, bilinear dat...
DYWAMIT: Asynchronous Wideband Dynamic Spectrum Sensing and Access System

Chunxiao Jiang,Chunxing Jiang,Norman C. Beaulieu,Yong Li,Yulong Zou,Yong Ren

DOI: https://doi.org/10.1109/jsyst.2014.2368692

IF: 4.802

2017-01-01

IEEE Systems Journal

Abstract:Dynamic spectrum access (DSA) is a promising solution for enhancing the utilization efficiency of spectrum resources. In DSA, spectrum sensing is crucial and cooperative spectrum sensing has been confirmed as a promising technology that can combat the wireless channel fading problem. Most current works have assumed that the secondary users (SUs) are synchronous with the primary users' (PUs) network. However, on one hand, the SUs may have no information about the PUs' communication protocols. On the other hand, communications among the PUs are not based on synchronous operation in some systems. In order to address such problems, the DYWAMIT, an asynchronous wideband DSA system, is proposed. In this scheme, the SUs need not maintain synchronism with the PUs, enabling the SUs to cognitively and asynchronously access primary channels even without knowing the communication protocols of the PUs. Performance analysis and simulations are conducted to evaluate the proposed DYWAMIT algorithm; in particular, the average throughput of the SUs, accounting for the asynchronism between the SUs and PUs, is derived for four cases of interest. Some important future research challenges are highlighted.
Random swapping, an effective and efficient way to boost the intensities of cross peaks in a 2D asynchronous spectrum

Kaili Li,Fengshan Zhou,Anqi He,Ran Guo,Limin Yang,Ying Zhao,Yizhuang Xu,Isao Noda,Yukihiro Ozaki

DOI: https://doi.org/10.1016/j.saa.2022.120968

2022-05-05

Abstract:Analysis of mixture via chromatographic-spectroscopic and analogous experiments is a common task in analytical chemistry. A 2D/nD asynchronous spectrum is effective in retrieving spectra of pure substances even if different components cannot be separated. However, noise in the 2D/nD asynchronous spectrum becomes a bottleneck in the analysis. Finding a suitable sequence of the 1D spectra used in constructing the 2D/nD asynchronous spectrum is helpful to improve the signal-to-noise level. A 2D/nD asynchronous spectrum is often produced via a large number of 1D spectra. The resultant colossal number of the possible sequences makes stochastic search the only possible way to find a suitable sequence. Random changing (RC) and random swapping (RS) are two ways to obtain a new sequence. We found that the possibility of finding a better sequence via an RS is significantly higher than that via an RC in the advanced stage of stochastic searching. This is the reason why the performance of RS is superior to that of RC in two model systems where 2D asynchronous spectra are used. We applied the RS approach on the analysis of water/isopropanol mixtures, and satisfactory sequences are acquired with affordable computational cost. Thus, the RS approach brings about an opportunity increase the signal-to-noise level of a 2D asynchronous spectrum in the analysis of the bilinear data from complex mixed samples.
Autonomous Compressive-Sensing-Augmented Spectrum Sensing

Xingjian Zhang,Yuan Ma,Yue Gao,Wei Zhang

DOI: https://doi.org/10.1109/tvt.2018.2822776

IF: 6.8

2018-01-01

IEEE Transactions on Vehicular Technology

Abstract:This paper proposes a new spectrum sensing technique, referred to as autonomous compressive sensing (CS)-augmented spectrum sensing, which can be developed to provide more efficient spectrum opportunity identification than geolocation database methods. First, we propose an autonomous CS-based sensing algorithm that enables the local secondary users (SUs) to automatically choose the minimum sensing time without knowledge of spectral sparsity or channel characteristics. The compressive samples are collected block-by-block in time, while the spectral is gradually reconstructed until the proposed stopping criterion is reached. Moreover, a CS-based blind cooperating user selection algorithm is proposed to select the cooperating SUs via indirectly measuring the degeneration of the signal-to-noise ratio experienced by different SUs. Numerical and real-world test results demonstrate that the proposed algorithms achieve high detection performance with reduced sensing time and number of cooperating SUs in comparison with the conventional compressive spectrum sensing algorithms.
Generalized singular spectrum analysis for the decomposition and analysis of non-stationary signals

Jialiang Gu,Kevin Hung,Bingo Wing-Kuen Ling,Daniel Hung-Kay Chow,Yang Zhou,Yaru Fu,Sio Hang Pun

DOI: https://doi.org/10.1016/j.jfranklin.2024.106696

IF: 4.246

2024-02-29

Journal of the Franklin Institute

Abstract:Singular spectrum analysis (SSA) has been verified to be an effective method for decomposing non-stationary signals. The decomposition and reconstruction stages can be interpreted as a zero-phase filtering process where reconstructed components are obtained by inputting a signal through moving average filters. However, mathematical analysis indicates that the use of a default rectangular window in the embedding stage would corrupt the frequency characteristics of the trajectory matrix, resulting in spectral leakage. To attenuate the effect of spectral leakage and to obtain more concentrated SSA components, this study introduces a windowing technique in SSA, called generalized singular spectrum analysis (GSSA). In GSSA, the default rectangular window is replaced with adjustable taper windows, which are widely used for attenuating spectral leakage. Through windowing, GSSA can achieve less spectral leakage, and produce more energy-concentrated reconstructed components compared with conventional SSA. Grouped spectral entropy (GSE) is used as the metric for evaluating the performance of the proposed GSSA algorithm. Results from experiments, which were conducted on a synthetic signal and two real electroencephalogram signals, show that GSSA outperforms the conventional SSA and the baseline in the reduction of spectral leakage. Compared with the baseline, the proposed GSSA achieves a lower averaged GSE, resulting in reduction of 0.4 for eigenfilters and 0.11 for reconstructed components, respectively. Our results reveal the effectiveness of GSSA in the decomposition and analysis of non-stationary signals.

automation & control systems,engineering, electrical & electronic, multidisciplinary,mathematics, interdisciplinary applications

Retention tests in the early phase of chronic renal failure. Comparison between non-protein nitrogen, urea, and creatinine.

Sinusoidal-assisted Synchrosqueezing Transform: Algorithms and Biomedical Applications

A novel systematic absence of cross peaks-based 2D-COS approach for bilinear data

Efficient Spectral-Aware Power Supply Noise Analysis for Low-Power Design Verification

Improvement of the Sensitivity of the Two-Dimensional Asynchronous Spectroscopy Based on the AOSD Approach by Using a Modified Reference Spectrum

A New Approach to Recognizing the Correct Pattern of Cross-Peaks from a Noisy 2D Asynchronous Spectrum by Detecting Intrinsic Symmetry Via the Kolmogorov-Smirnov Test.

A Preliminary Study on Constructing a High-Dimensional Asynchronous Spectrum to Analyze Bilinear Data.

Sample-Sample Correlation Asynchronous Spectroscopic Method Coupled with Multivariate Curve Resolution-Alternating Least Squares to Analyze Challenging Bilinear Data.

Spectrum Sensing with Small-Sized Data Sets in Cognitive Radio: Algorithms and Analysis.

Two-dimensional Asynchronous Spectrum with Auxiliary Cross Peaks in Probing Intermolecular Interactions

S CA: A Sparse Strip Spectral Correlation Analyzer

Epidermal growth factor and proliferation in rat hepatocytes in primary culture isolated at different times after partial hepatectomy.

A Convex Projections Approach to Spectral Analysis.

[Influence of Concentration Sequence on the Signal-to-Noise Ratio of Cross Peaks of 2D Asynchronous Spectra Generated by Using the DAOSD Approach].

Patterns of Cross Peaks in 2d Synchronous Spectrum Generated by Using Orthogonal Sample Design Scheme

A contention-based wideband DSA algorithm with asynchronous cooperative spectrum sensing.

Sample–Sample Correlation Asynchronous Spectroscopic Method Coupled with Multivariate Curve Resolution-Alternating Least Squares To Analyze Challenging Bilinear Data

DYWAMIT: Asynchronous Wideband Dynamic Spectrum Sensing and Access System

Random swapping, an effective and efficient way to boost the intensities of cross peaks in a 2D asynchronous spectrum

Autonomous Compressive-Sensing-Augmented Spectrum Sensing

Generalized singular spectrum analysis for the decomposition and analysis of non-stationary signals