Abstract:Based on the finite difference method, the fixed boundary method, and a staggered grid method, this paper develops a one-dimensional thermal–hydraulic analysis code to simulate the effects of heave motion and more complex oceanic motions, namely heaving coupled with inclination and heaving coupled with swaying, on the thermal–hydraulic parameters of the International Reactor Innovative and Secure (IRIS) reactor's helical coil once-through steam generator (HCOTSG). The oceanic conditions were achieved by modifying the momentum equation. The validity and accuracy of the code were obtained by comparing the results with the design parameters of HCOTSG for two types of marine nuclear reactors, the SMART reactor and the IRIS reactor, and with the calculations of some similar international prediction programs. The simulation results indicate that (1) when only heave motion is considered, increasing the amplitude and reducing the period both result in a greater magnitude and a faster rate of change in the HCOTSG parameters. (2) When the combined motion of inclining and heaving is present, the dynamic performance of the composite motion inclining towards the positive x-axis deteriorates the most severely, while its thermodynamic conditions improve slightly. In this direction, the inclining angle has little influence on the thermal–hydraulic characteristics of HCOTSG. (3) When the combined motion of heaving and swaying is present, the dynamic performance is more severely affected under swaying motion towards the negative y-axis, despite a slight improvement in thermodynamic conditions. In this direction, as the swaying angle increases, the trend of parameter variation under swaying is similar but with a greater magnitude of change. The deterioration in dynamic performance becomes more severe, although there are small improvements in thermodynamic conditions. With the swaying period increasing, the maximum and minimum values of the secondary side pressure drop show little change. Additionally, the average thermodynamic conditions exhibit little variation.

Development of the thermal hydraulic analysis code, TASS/SMR-S, under multi-dimensional motion for a reactor under inclination and rolling conditions

The development and validation of a natural circulation analysis code for marine reactors

Theoretical Analysis of A Natural Circulation System under Rolling Condition Based on Relap5/Mod3.3 Code

Single Phase Natural Circulation Behaviors of the Integral Type Marine Reactor Simulator under Rolling Motion Condition

Simulation investigation of ocean motion on small reactor based on modified system code

Development of A Thermal-Hydraulic Subchannel Analysis Code for Motion Conditions

Heaving motion effect on the transient thermodynamic characteristics of helical coil once-through steam generators in mixed ocean conditions

CFD simulation of a full-scale three-dimensional flow and temperature distribution inside a reactor under ocean conditions

Effects of rolling motion on helical coil once-through steam generator thermal-hydraulic characteristics

Reactor Natural Circulation Model for a Reactor Experiencing Motion

The Development and Application of a Sub-Channel Code in Ocean Environment

Development of a Thermal Hydraulic Code for an Integral Reactor

Code Development For The Neutronics/Thermal-Hydraulics Coupling Transient Analysis Of Molten Salt Reactors

Study on Thermal-Hydraulic Behavior of an Integral Type Reactor under Heaving Condition

Development and verification of a neutronics-thermal hydraulics coupling code with unstructured meshes neutron transport model

Numerical Analysis Of Bilge Keels Effects On The Rolling Motion Of A Ship

Transient Thermal Behaviors of SBO Accident for a 200MW OFNP under Heaving Motion Conditions

Time Domain Simulations of Ship Maneuvering and Roll Motion in Regular Waves Based on a Hybrid Method

Thermal-hydraulic Analysis of a Lead–bismuth Small Modular Reactor under Moving Conditions

Effects of ocean environment on the passive residual heat-removal system (PRHRS) of reactor for ship

Development of a Two-Fluid Based Thermal-Hydraulic Subchannel Analysis Code with High-Resolution Numerical Method