Abstract:Heavy metal wastewater poses a serious threat to the environment. In comparison to the existing methods of chemical precipitation, ion exchange and carbon adsorption, biosorption is an attractive alternative for the recovery of heavy metals from industrial effluents. However, nickel ion, different from other heavy metal ions, is a more recalcitrant pollutant and has low affinity to many metal tolerant microorganisms. In this study, Escherichia coli JM109 was genetically engineered to simultaneously express a Ni2+ transport system (the product of nixA gene) andoverexpress metallothionein (MT). NixA protein has a high affinity for Ni2+, and metallothioneins (MTs) are capable of binding a variety of heavy metals including Ni2+ . The Ni2+ bioaccumulation performance of the genetically engineered E. coli JM109 was evaluated. Time-course test showed that the bioaccumulation rate was rapid, and 95% of the accumulation was achieved within the first 10 minutes. The maximum Ni2+ bioaccumulation by genetically engineered E. coli cells was dramatically increased from 1.54 mg/g to 10.11mg/g, a more than five-fold increase than that of the original E. coli strain. The isotherm was of Langmuir type. Within the tested pH range (pH 4-10), the engineered cells displayed more resistance to pH variation, retaining up to 80% of the Ni2+ binding capacity at pH 4, while the original E. coli host cells lost 80% of Ni2+ binding capacity at pH 4. The presence of Na+ and Ca2+ affected Ni2+ bioaccumulation, but the effects were not serious, as 71% and 66% of the Ni2+ binding capacities were retained respectively at the concentrations of 1000 mg/L Na+ and 1000 mg/L Ca2+ . However, Mg2+ exerted a severe adverse effect on Ni2+ bioaccumulation, 83% of Ni2+ accumulating capacity was lost when Mg2+ concentration reached 200 mg/L. The effects of different kinds of heavy metals on Ni2+ accumulating were different. The genetically engineered E. coli cell lost less than 45% of its Ni2+ bioaccumulation activity in the presence of 50 mg/L lead or cadmium, 66% in the presence of 25mg/L mercury and 84% in the presence of 40 mg/L copper. The presence of glucose did not improve Ni2+ uptake. Our study suggests that the genetically engineered E. coli JM109 has potential application for effective and efficient recovery of nickel from aqueous solutions.

Nickel complexation as an innovative approach for nickel-cobalt selective recovery using sulfate-reducing bacteria

[Uptake of Nickel from Industrial Wastewater by Genetically Engineered Escherichia Coli JM109].

Ferrous sulfide nanoparticles can be biosynthesized by sulfate-reducing bacteria: Synthesis, characterization and removal of heavy metals from acid mine drainage

Multi-scale analysis of nickel ion tolerance mechanism for thermophilic Sulfobacillus thermosulfidooxidans in bioleaching

Experimental and geochemical simulation of nickel carbonate mineral precipitation by carbonate-laden ureolytic fungal culture supernatants

Efficient separation and recovery of Co and Ni from ammonium sulfate roasting‐water leaching solutions of oceanic cobalt‐rich crusts by sulfide precipitation and P507–Cyanex 272 synergistic extraction

Contact-bioleaching Mechanism of Ni and Co from Sulfide Concentrate at Neutral Ph by Heterotrophic Bacteria

Novel microbial consortia facilitate metalliferous immobilization in non-ferrous metal(loid)s contaminated smelter soil: Efficiency and mechanisms

Isolation and identification of metallotolerant bacteria with a potential biotechnological application

Recovery of Pure Co(II) and Ni(II) Solutions from Synthetic Sulfate Leach Liquor of Laterite Ores by Precipitation and Solvent Extraction

Isolation of Efficient Metal-Binding Bacteria from Boreal Peat Soils and Development of Microbial Biosorbents for Improved Nickel Scavenging

Selective and enhanced nickel adsorption from sulfate- and calcium-rich solutions using chitosan

Selective extraction performance of Ni, Cu, Co, and Mn adopted by a coupled leaching of low-grade Ni-sulfide ore and polymetallic Mn-oxide ore in sulphuric acid solutions

Investigation of leaching of nickel sulfide flotation tailings to recover valuable metals

Biosorption of nickel, cobalt, zinc and copper ions by Serratia marcescens strain 16 in mono and multimetallic systems

Bacterial shifts during in-situ mineralization bio-treatment to non-ferrous metal(loid) tailings

Biological upcycling of nickel and sulfate as electrocatalyst from electroplating wastewater

Metagenomics diversity analysis of sulfate-reducing bacteria and their impact on biocorrosion and mitigation approach using an organometallic inhibitor

Isolation and Characterization of Four Gram-Positive Nickel-Tolerant Microorganisms from Contaminated Sediments.

Bioleaching of valuable metals from three cathode active materials comprising lithium nickel cobalt manganese (NCM) oxide using indigenous microorganisms

Sequestration of cobalt and nickel by biofilm forming bacteria isolated from spent nuclear fuel pool water