Abstract:The Scanning Electrochemical Microscope (SECM) is a nonoptical scanning microscopic instrument capable of imaging highly localized electrical currents associated with charge transfer reactions on metallic biomaterials surfaces. The SECM operates as an aqueous electrochemical cell under bipotentiostatic control with a microelectrode and sample independently biased as working electrodes. Microelectrode current and position is recorded as it is scanned very near a metallurgically polished planar sample surface. To date, the SECM has imaged metallic biomaterials surfaces in oxygen reaction rate imaging (ORRI) and ion release and deposition imaging (IRDI) modes. In ORRI, sample and microelectrode are biased at sufficiently negative potentials to reduce absorbed oxygen. As the microelectrode scans areas of active oxygen reduction, localized diffusion fields with decreased oxygen solution concentrations are encountered and resultant decrements in microelectrode current are observed. In IRDI mode the sample is positively biased and the microelectrode is negatively biased. The microelectrode detects anodic dissolution products with highest currents being observed over the most active areas. Performance of the SECM has been evaluated on Ni minigrids, gamma-1 Hg-Ag dental amalgam crystals, and sintered beads of Co-Cr-Mo alloy which represent significantly different geometries and corrosion processes to help demonstrate the potential of this instrument. The SECM is a valuable tool for imaging microelectrochemical processes on the surfaces of metallurgically polished metallic biomaterials samples and a wide variety of other surfaces of biological interest where charge transfer reactions occur. The SECM allows selective biasing of metallic biomaterials surfaces and Faradaic reactions can be selectively imaged while the surface is in the active, passive, or transpassive state.

Fast detection of micro-objects using scanning electrochemical microscopy based on visual recognition and machine learning

Nanoscale Imaging of Surface Topography and Reactivity with the Scanning Electrochemical Microscope

Electron Transfer/Ion Transfer Mode of Scanning Electrochemical Microscopy (secm): A New Tool for Imaging and Kinetic Studies

Scanning Electrochemical Microscopy in the 21st Century. Update 1: Five Years After.

Machine-learning Reprogrammable Metasurface Imager.

Scanning electrochemical microscopy (SECM) as a tool in biosensor research

AI-Assisted Fusion of Scanning Electrochemical Microscopy Images Using Novel Soft Probe

Scanning electrochemical microscopy of metallic biomaterials: reaction rate and ion release imaging modes

Exploring the Living Cell: Applications and Advances of Scanning Electrochemical Microscopy

Fast Scan Mode of Scanning Electrochemical Microscopy: In-situ Characterization of Phase Transition and Mapping the Hydrogen Evolution Activity for MoS2

Electrochemical push-pull scanner with mass spectrometry detection.

Identification of Cell Status via Simultaneous Multitarget Imaging Using Programmable Scanning Electrochemical Microscopy

Recent advances in scanning electrochemical microscopy for energy applications

Simulating Scanning Electrochemical Microscopy Images of Arbitrarily Shaped Reactive Sites without a Site-Specific Model

A soft touch with electron beams: Digging out structural information of nanomaterials with advanced scanning low energy electron microscopy coupled with deep learning

Atomic force microscopy - Scanning electrochemical microscopy (AFM-SECM) for nanoscale topographical and electrochemical characterization: Principles, applications and perspectives

Scanning electrochemical microscopy methods (SECM) and ion-selective microelectrodes for corrosion studies

Surface Characterisation and Modification by the Scanning Electrochemical Microscope (SECM)

Uses of Scanning Electrochemical Microscopy (SECM) for the Characterization with Spatial and Chemical Resolution of Thin Surface Layers and Coating Systems Applied on Metals: A Review

General Method for Fitting Kinetics from the SECM Images of Reactive Sites on Flat Surfaces

Simultaneous Nanomechanical and Electrochemical Mapping: Combining Peak Force Tapping Atomic Force Microscopy with Scanning Electrochemical Microscopy