[Masked depression].

W. Birkmayer

Abstract:

What problem does this paper attempt to address?

Progress of crystallization in microfluidic devices

Huan-Huan Shi,Yan Xiao,Steven Ferguson,Xin Huang,Na Wang,Hong-Xun Hao

DOI: https://doi.org/10.1039/c6lc01225f

2017-06-27

Lab Chip

Abstract:Microfluidic technology provides a unique environment for the investigation of crystallization processes at the nano or meso scale. The convenient operation and precise control of process parameters, at these scales of operation enabled by microfluidic devices, are attracting significant and increasing attention in the field of crystallization. In this paper, developments and applications of microfluidics in crystallization research including: crystal nucleation and growth, polymorph and cocrystal screening, preparation of nanocrystals, solubility and metastable zone determination, are summarized and discussed. The materials used in the construction and the structure of these microfluidic devices are also summarized and methods for measuring and modelling crystal nucleation and growth process as well as the enabling analytical methods are also briefly introduced. The low material consumption, high efficiency and precision of microfluidic crystallizations are of particular significance for active pharmaceutical ingredients, proteins, fine chemicals, and nanocrystals. Therefore, it is increasingly adopted as a mainstream technology in crystallization research and development.
Flow‐Xl: a new facility for the analysis of crystallization in flow systems

T. D. Turner,C. O'Shaughnessy,X. He,M. A. Levenstein,L. Hunter,J. Wojciechowski,H. Bristowe,R. Stone,C. C. Wilson,A. Florence,K. Robertson,N. Kapur,F. C. Meldrum

DOI: https://doi.org/10.1107/s1600576724006113

IF: 4.868

2024-08-22

Journal of Applied Crystallography

Abstract:A new in situ facility (Flow‐Xl) for the characterization of crystallization systems in flow using combined in situ X‐ray diffraction and Raman spectroscopy is presented. This article highlights commissioning and calibration experiments on case‐study systems that stress the utility of the instrument for extracting reproducible qualitative and quantitative phase information during crystallization processes.Characterization of crystallization processes in situ is of great importance to furthering knowledge of how nucleation and growth processes direct the assembly of organic and inorganic materials in solution and, critically, understanding the influence that these processes have on the final physico‐chemical properties of the resulting solid form. With careful specification and design, as demonstrated here, it is now possible to bring combined X‐ray diffraction and Raman spectroscopy, coupled to a range of fully integrated segmented and continuous flow platforms, to the laboratory environment for in situ data acquisition for timescales of the order of seconds. The facility used here (Flow‐Xl) houses a diffractometer with a micro‐focus Cu Kα rotating anode X‐ray source and a 2D hybrid photon‐counting detector, together with a Raman spectrometer with 532 and 785 nm lasers. An overview of the diffractometer and spectrometer setup is given, and current sample environments for flow crystallization are described. Commissioning experiments highlight the sensitivity of the two instruments for time‐resolved in situ data collection of samples in flow. Finally, an example case study to monitor the batch crystallization of sodium sulfate from aqueous solution, by tracking both the solute and solution phase species as a function of time, highlights the applicability of such measurements in determining the kinetics associated with crystallization processes. This work illustrates that the Flow‐Xl facility provides high‐resolution time‐resolved in situ structural phase information through diffraction data together with molecular‐scale solution data through spectroscopy, which allows crystallization mechanisms and their associated kinetics to be analysed in a laboratory setting.

chemistry, multidisciplinary,crystallography
Microfluidic Chips for In Situ Crystal X-ray Diffraction and In Situ Dynamic Light Scattering for Serial Crystallography

Yannig Gicquel,Robin Schubert,Svetlana Kapis,Gleb Bourenkov,Thomas Schneider,Markus Perbandt,Christian Betzel,Henry N. Chapman,Michael Heymann

DOI: https://doi.org/10.3791/57133

2018-04-24

Journal of Visualized Experiments

Abstract:This protocol describes fabricating microfluidic devices with low X-ray background optimized for goniometer based fixed target serial crystallography. The devices are patterned from epoxy glue using soft lithography and are suitable for in situ X-ray diffraction experiments at room temperature. The sample wells are lidded on both sides with polymeric polyimide foil windows that allow diffraction data collection with low X-ray background. This fabrication method is undemanding and inexpensive. After the sourcing of a SU-8 master wafer, all fabrication can be completed outside of a cleanroom in a typical research lab environment. The chip design and fabrication protocol utilize capillary valving to microfluidically split an aqueous reaction into defined nanoliter sized droplets. This loading mechanism avoids the sample loss from channel dead-volume and can easily be performed manually without using pumps or other equipment for fluid actuation. We describe how isolated nanoliter sized drops of protein solution can be monitored in situ by dynamic light scattering to control protein crystal nucleation and growth. After suitable crystals are grown, complete X-ray diffraction datasets can be collected using goniometer based in situ fixed target serial X-ray crystallography at room temperature. The protocol provides custom scripts to process diffraction datasets using a suite of software tools to solve and refine the protein crystal structure. This approach avoids the artefacts possibly induced during cryo-preservation or manual crystal handling in conventional crystallography experiments. We present and compare three protein structures that were solved using small crystals with dimensions of approximately 10-20 µm grown in chip. By crystallizing and diffracting in situ, handling and hence mechanical disturbances of fragile crystals is minimized. The protocol details how to fabricate a custom X-ray transparent microfluidic chip suitable for in situ serial crystallography. As almost every crystal can be used for diffraction data collection, these microfluidic chips are a very efficient crystal delivery method.

multidisciplinary sciences
Microfluidic platform for optimization of crystallization conditions

Shuheng Zhang,Charline J.J. Gerard,Aziza Ikni,Gilles Ferry,Laurent M. Vuillard,Jean A. Boutin,Nathalie Ferte,Romain Grossier,Nadine Candoni,Stéphane Veesler

DOI: https://doi.org/10.1016/j.jcrysgro.2017.01.026

IF: 1.8

2017-08-01

Journal of Crystal Growth

Abstract:We describe a universal, high-throughput droplet-based microfluidic platform for crystallization. It is suitable for a multitude of applications, due to its flexibility, ease of use, compatibility with all solvents and low cost. The platform offers four modular functions: droplet formation, on-line characterization, incubation and observation. We use it to generate droplet arrays with a concentration gradient in continuous long tubing, without using surfactant. We control droplet properties (size, frequency and spacing) in long tubing by using hydrodynamic empirical relations. We measure droplet chemical composition using both an off-line and a real-time on-line method. Applying this platform to a complicated chemical environment, membrane proteins, we successfully handle crystallization, suggesting that the platform is likely to perform well in other circumstances. We validate the platform for fine-gradient screening and optimization of crystallization conditions. Additional on-line detection methods may well be integrated into this platform in the future, for instance, an on-line diffraction technique. We believe this method could find applications in fields such as fluid interaction engineering, live cell study and enzyme kinetics.

materials science, multidisciplinary,physics, applied,crystallography
In situ counter‐diffusion crystallization and long‐term crystal preservation in microfluidic fixed targets for serial crystallography

Zhongrui Liu,Kevin Gu,Megan Shelby,Debdyuti Roy,Srinivasan Muniyappan,Marius Schmidt,Sankar Raju Narayanasamy,Matthew Coleman,Matthias Frank,Tonya L. Kuhl

DOI: https://doi.org/10.1107/s1600576724007544

IF: 4.868

2024-09-26

Journal of Applied Crystallography

Abstract:User‐friendly in situ counter‐diffusion crystallization and long‐term storage setups in microfluidic fixed targets provide a reliable approach to forming large crystals and maintaining their hydration for weeks, allowing ample time to grow, select and preserve the best crystal batches before X‐ray beam time.Compared with batch and vapor diffusion methods, counter diffusion can generate larger and higher‐quality protein crystals yielding improved diffraction data and higher‐resolution structures. Typically, counter‐diffusion experiments are conducted in elongated chambers, such as glass capillaries, and the crystals are either directly measured in the capillary or extracted and mounted at the X‐ray beamline. Despite the advantages of counter‐diffusion protein crystallization, there are few fixed‐target devices that utilize counter diffusion for crystallization. In this article, different designs of user‐friendly counter‐diffusion chambers are presented which can be used to grow large protein crystals in a 2D polymer microfluidic fixed‐target chip. Methods for rapid chip fabrication using commercially available thin‐film materials such as Mylar, propylene and Kapton are also detailed. Rules of thumb are provided to tune the nucleation and crystal growth to meet users' needs while minimizing sample consumption. These designs provide a reliable approach to forming large crystals and maintaining their hydration for weeks and even months. This allows ample time to grow, select and preserve the best crystal batches before X‐ray beam time. Importantly, the fixed‐target microfluidic chip has a low background scatter and can be directly used at beamlines without any crystal handling, enabling crystal quality to be preserved. The approach is demonstrated with serial diffraction of photoactive yellow protein, yielding 1.32 Å resolution at room temperature. Fabrication of this standard microfluidic chip with commercially available thin films greatly simplifies fabrication and provides enhanced stability under vacuum. These advances will further broaden microfluidic fixed‐target utilization by crystallographers.

chemistry, multidisciplinary,crystallography
Droplet Microfluidics XRD Identifies Effective Nucleating Agents for Calcium Carbonate

Mark A. Levenstein,Clara Anduix‐Canto,Yi‐Yeoun Kim,Mark A. Holden,Carlos González Niño,David C. Green,Stephanie E. Foster,Alexander N. Kulak,Lata Govada,Naomi E. Chayen,Sarah J. Day,Chiu C. Tang,Britta Weinhausen,Manfred Burghammer,Nikil Kapur,Fiona C. Meldrum

DOI: https://doi.org/10.1002/adfm.201808172

IF: 19

2019-03-13

Advanced Functional Materials

Abstract:<p>The ability to control crystallization reactions is required in a vast range of processes including the production of functional inorganic materials and pharmaceuticals and the prevention of scale. However, it is currently limited by a lack of understanding of the mechanisms underlying crystal nucleation and growth. To address this challenge, it is necessary to carry out crystallization reactions in well‐defined environments, and ideally to perform in situ measurements. Here, a versatile microfluidic synchrotron‐based technique is presented to meet these demands. Droplet microfluidic‐coupled X‐ray diffraction (DMC‐XRD) enables the collection of time‐resolved, serial diffraction patterns from a stream of flowing droplets containing growing crystals. The droplets offer reproducible reaction environments, and radiation damage is effectively eliminated by the short residence time of each droplet in the beam. DMC‐XRD is then used to identify effective particulate nucleating agents for calcium carbonate and to study their influence on the crystallization pathway. Bioactive glasses and a model material for mineral dust are shown to significantly lower the induction time, highlighting the importance of both surface chemistry and topography on the nucleating efficiency of a surface. This technology is also extremely versatile, and could be used to study dynamic reactions with a wide range of synchrotron‐based techniques.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Crystallization via tubing microfluidics permits both in situ and ex situ X-ray diffraction

Charline Gerard,Gilles Ferry,Laurent Vuillard,Jean A Boutin,Léonard Chavas,Tiphaine Huet,Nathalie Ferte,Romain Grossier,Nadine Candoni,Stéphane Veesler

DOI: https://doi.org/10.48550/arXiv.1704.06301

2017-03-22

Abstract:We used a microfluidic platform to address the problems of obtaining diffraction quality crystals and crystal handling during transfer to the X-ray diffractometer. We optimize crystallization conditions of a pharmaceutical protein and collect X-ray data both in situ and ex situ.

Biomolecules
Distributed Evolutionary Algorithm Search for Multiobjective Spanning Tree Problem

Rajeev Kumar,P. Singh,P. Chakrabarti

DOI: https://doi.org/10.1007/978-3-540-30536-1_65

2004-12-27

Abstract:
Droplet microfluidics for time-resolved serial crystallography

Jack Stubbs,Theo Hornsey,Niall Hanrahan,Luis Blay Esteban,Rachel Bolton,Martin Malý,Shibom Basu,Julien Orlans,Daniele de Sanctis,Jung-uk Shim,Patrick D. Shaw Stewart,Allen M. Orville,Ivo Tews,Jonathan West

DOI: https://doi.org/10.1101/2024.01.12.575388

2024-01-13

Abstract:Serial crystallography requires large numbers of microcrystals and robust strategies to rapidly apply substrates to initiate reactions in time-resolved studies. Here we report the use of droplet miniaturisation for the controlled production of uniform crystals, providing an avenue for controlled diffusion and synchronous reaction initiation. The approach was evaluated using two enzymatic systems, yielding 3-µm lysozyme crystals and 2-µm crystals of Pdx1, an Arabidopsis enzyme involved in vitamin B6 biosynthesis. A seeding strategy was used to overcome the improbability of Pdx1 nucleation occurring with diminishing droplet volumes. Convection within droplets was exploited for rapid crystal mixing with ligands. Mixing times of <2 milliseconds were achieved. Droplet microfluidics for crystal size engineering and rapid micromixing can be used to advance time-resolved serial crystallography.

Biochemistry
X-ray compatible microfluidics for in situ studies of chemical state, transport and reaction of light elements in an aqueous environment using synchrotron radiation

Jason Brenker,Katja Henzler,Camelia N Borca,Thomas Huthwelker,Tuncay Alan

DOI: https://doi.org/10.1039/d1lc00996f

2022-03-15

Lab Chip

Abstract:This paper presents an X-ray compatible microfluidic platform for in situ characterization of chemical reactions at synchrotron light sources. We demonstrate easy to implement techniques to probe reacting solutions as they first come into contact, and study the very first milliseconds of their reaction in real-time through X-ray absorption spectroscopy (XAS). The devices use polydimethylsiloxane (PDMS) microfluidic channels sandwiched between ultrathin, X-ray transparent silicon nitride observation windows and rigid substrates. The new approach has three key advantages: i) owing to the assembly techniques employed, the devices are suitable for both high energy and tender (1-5 keV) X-rays; ii) they can operate in a vacuum environment (a must for low energy X-rays) and iii) they are robust enough to survive a full 8 hour shift of continuous scanning with a micro-focused beam, providing higher spatial and thus greater time resolution than previous studies. The combination of these opens new opportunities for in situ studies. This has so far not been possible with Kapton or glass-based flow cells due to increased attenuation of the low energy beam passing through these materials. The devices provide a well-defined mixing region to collect spatial maps of spatially stable concentration profiles, and XAS point spectra to elucidate the chemical structure and characterize the chemical reactions. The versatility of the approach is demonstrated through in situ XAS measurements on the mixing of two reactants in a microfluidic laminar flow device, as well as a segmented droplet based system for time resolved analysis.
Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Xianting Ding,Jian Yang,Zhijun Ma,Dandan Liu,Weiping Wang,Jianjun Ye,Ieong Wong,Matt Barnes

DOI: https://doi.org/10.1109/NEMS.2013.6559718

2013-01-01

Abstract:This paper reports a microfluidic reactor for synthesizing micro- and nano-droplets using fluid shearing instability of immiscible flow in microchannels. Three factors, flow rate between the two inputs, spout geometry and surface tension are numerically studied. Based on the simulation, a device with the optimal parameters was fabricated and tested. Both computational fluid dynamics (CFD) simulation results and experimental results suggested that this technique is capable of conveniently controlling the droplets sizes from hundreds of micrometers down to several micrometers or even nanometers. This pilot research offers a proof-of-concept demonstration using instabilities in the microchannels to synthesize large quantity of microdroplets. Although the microdroplets in this study were formed by DI water containing Tween20 and silicon oil, the design with modification could be applied for synthesis of other types of micro- and nano-droplets.
Advances in Microfluidic Techniques for Nanoliter-Scale Protein Crystallization Screening

Gao Jie,Fang Qun

DOI: https://doi.org/10.19756/j.issn.0253-3820.181580

IF: 1.193

2019-01-01

Chinese Journal of Analytical Chemistry

Abstract:X-ray crystallography is the major approach in the determination of protein structure. To obtain high quality protein crystals that meet the diffraction requirements, researchers usually spend large amounts of reagents and samples for large-scale crystallization condition screening. Microfluidic technology can greatly reduce the consumption of protein samples in protein crystallization screening by manipulating ultramicro amounts of fluids. In this review, the recent progress in microfluidic protein crystallization screening methods based on the microbatch, vapor diffusion, free-interface diffusion and dialysis methods is introduced according to the difference in crystallization methods.
Deep Learning-Aided High-Throughput Screening of Time-Resolved Protein Crystallization on Programmable Microliter-Droplet Systems

Jianhua Zhou,Lu Huang,Deyu Yang,Ziming Yu,Jinxu He,Yin Chen

DOI: https://doi.org/10.2139/ssrn.4134851

2022-01-01

SSRN Electronic Journal

Abstract:Crystallization of proteins is a critical step in structural biology, biopharmaceutical industry and materials science. Microfluidic technology has emerged as a promising tool for screening the crystallization conditions with advantages of increased throughput, reduced consumption of reagents and lower cost. However, current mirofluidic approches generally lack the module for high-speed data analysis, ignore the crystallization kinetics and suffer from inconsistency after scaling up due to the subnano-/nano-liter-scaled volume. To address the issues, we propose a deep learning-aided programmable microliter-droplet system, which allows the high-throughput screening of time-resolved protein crystallization in microliter scale. Based on the system, a series of temporal phase diagrams are acquired, which reveal the time-resolved crystallization of target proteins under different crystallization conditions. They provide precise guidance on the scale-up experiment (~93% in consistency), and help gain insight into the kinetic characteristics of protein crystallization.
A Microchip to Analyze Single Crystal Growth and Size-Controllability

YuanFeng Pang,JiangJiang Liu,HaiFang Li,JinMing Lin

DOI: https://doi.org/10.1007/s11426-009-0108-x

2009-01-01

Abstract:A microfluidic device to control single crystallization on the micron scale has been developed. The salt solution was stored in the nano-volume gaps between the arrays of protrudent circular plots in the microchip. The mixed organic solvent was injected into the chip as the counter diffusion phase for crystallization forming. This device provides a liquid-liquid interface through which only one phase flows while the other stays at the fixed plot. Therefore, it is possible to control the position of crystallization on the fixed plot. We can control the size and the uniformity of single crystals from 5 to 50 μm in length by adjusting the relative factors, such as interface lifetime, breeds of the mix-organic solvents and injecting velocities. The longer interface lifetime and lower organic solvent injecting velocities can bring up larger and more asymmetric crystals, which nearly shows the same trend compared with the macroscopic crystallization. Finally, the effect of the surfactant on the crystallization in the micro-device was studied. By adding the surfactant into the liquid-liquid interface, smaller sizes of crystals can be obtained without changing the crystal configuration.
In situ serial crystallography facilitates 96-well plate structural analysis at low symmetry

Nicolas Foos,Jean Baptise Florial,Mathias Eymery,Jeremy Sinoir,Franck Felisaz,Marcus Oscarsson,Antonia Beteva,Matthew W Bowler,Didier Nurizzo,Gergely Papp,Montserrat Soler-Lopez,Max Nanao,Shibom Basu,Andrew A McCarthy

DOI: https://doi.org/10.1107/S2052252524005785

2024-09-01

IUCrJ

Abstract:The advent of serial crystallography has rejuvenated and popularized room-temperature X-ray crystal structure determination. Structures determined at physiological temperature reveal protein flexibility and dynamics. In addition, challenging samples (e.g. large complexes, membrane proteins and viruses) form fragile crystals that are often difficult to harvest for cryo-crystallography. Moreover, a typical serial crystallography experiment requires a large number of microcrystals, mainly achievable through batch crystallization. Many medically relevant samples are expressed in mammalian cell lines, producing a meager quantity of protein that is incompatible with batch crystallization. This can limit the scope of serial crystallography approaches. Direct in situ data collection from a 96-well crystallization plate enables not only the identification of the best diffracting crystallization condition but also the possibility for structure determination under ambient conditions. Here, we describe an in situ serial crystallography (iSX) approach, facilitating direct measurement from crystallization plates mounted on a rapidly exchangeable universal plate holder deployed at a microfocus beamline, ID23-2, at the European Synchrotron Radiation Facility. We applied our iSX approach on a challenging project, autotaxin, a therapeutic target expressed in a stable human cell line, to determine the structure in the lowest-symmetry P1 space group at 3.0 Å resolution. Our in situ data collection strategy provided a complete dataset for structure determination while screening various crystallization conditions. Our data analysis reveals that the iSX approach is highly efficient at a microfocus beamline, improving throughput and demonstrating how crystallization plates can be routinely used as an alternative method of presenting samples for serial crystallography experiments at synchrotrons.
A microfluidic device for investigating crystal nucleation kinetics

Philippe Laval,Jean-Baptiste Salmon,Mathieu Joanicot

DOI: https://doi.org/10.1016/j.jcrysgro.2006.12.044

2006-12-20

Abstract:We have developed an original setup using microfluidic tools allowing one to produce continuously monodisperse microreactors ($\approx 100$ nL), and to control their temperatures as they flow in the microdevice. With a specific microchannels geometry, we are able to apply large temperature quenches to droplets containing a KNO$_3$ solution (up to 50$^{\circ}$C in 10 s), and then to follow nucleation kinetics at high supersaturations. By measuring the probability of crystal presence in the droplets as a function of time, we estimate the nucleation rate for different supersaturations, and confront our results to the classical nucleation theory.

Soft Condensed Matter
Microfluidic Technology: Uncovering the Mechanisms of Nanocrystal Nucleation and Growth

Ioannis Lignos,Richard Maceiczyk,Andrew J deMello

DOI: https://doi.org/10.1021/acs.accounts.7b00088

2017-05-16

Abstract:The controlled and reproducible formation of colloidal semiconductor nanocrystals (or quantum dots) is of central importance in nanoscale science and technology. The tunable size- and shape-dependent properties of such materials make them ideal candidates for the development of efficient and low-cost displays, solar cells, light-emitting devices, and catalysts. The formidable difficulties associated with the macroscale preparation of semiconductor nanocrystals (possessing bespoke optical and chemical properties) result from the fact that underlying reaction mechanisms are complex and that the reactive environment is difficult to control. Automated microfluidic reactors coupled with monitoring systems and optimization algorithms aim to elucidate complex reaction mechanisms that govern both nucleation and growth of nanocrystals. Such platforms are ideally suited for the efficient optimization of reaction parameters, assuring the reproducible synthesis of nanocrystals with user-defined properties. This Account aims to inform the nanomaterials community about how microfluidic technologies can supplement flask experimentation for the ensemble investigation of formation mechanisms and design of semiconductor nanocrystals. We present selected studies outlining the preparation of quantum dots using microfluidic systems with integrated analytics. Such microfluidic reaction systems leverage the ability to extract real-time information regarding optical, structural, and compositional characteristics of quantum dots during nucleation and growth stages. The Account further highlights our recent research activities focused on the development and application of droplet-based microfluidics with integrated optical detection systems for the efficient and rapid screening of reaction conditions and a better understanding of the mechanisms of quantum dot synthesis. We describe the features and operation of fully automated microfluidic reactors and their subsequent application to high-throughput parametric screening of metal chalcogenides (CdSe, PbS, PbSe, CdSeTe), ternary and core/shell heavy metal-free quantum dots (CuInS2, CuInS2/ZnS), and all-inorganic perovskite nanocrystals (CsPbX3, X = Cl, Br, I) syntheses. Critically, concurrent absorption and photoluminescence measurements on millisecond to second time scales allow the extraction of basic parameters governing nanocrystal formation. Moreover, experimental data obtained from such microfluidic platforms can be directly supported by theoretical models of nucleation and growth. To this end, we also describe the use of metamodeling algorithms able to accurately predict optimized conditions of CdSe synthesis using a minimal number of sample parameters. Importantly, we discuss future challenges that must be addressed before microfluidic technologies are in a position to be widely adopted for the on-demand formation of nanocrystals. From a technology perspective, these challenges include the development of novel engineering platforms for the formation of complex architectures, the integration of monitoring systems able to harvest photophysical and structural information, the incorporation of continuous purification systems, and the application of optimization algorithms to multicomponent quantum dot systems.
Efficient in situ screening of and data collection from microcrystals in crystallization plates

Amy J. Thompson,Juan Sanchez-Weatherby,Lewis J. Williams,Halina Mikolajek,James Sandy,Jonathan A. R. Worrall,Michael A. Hough

DOI: https://doi.org/10.1107/s2059798324001955

2024-04-04

Acta Crystallographica Section D Structural Biology

Abstract:A considerable bottleneck in serial crystallography at XFEL and synchrotron sources is the efficient production of large quantities of homogenous, well diffracting microcrystals. Efficient high-throughput screening of batch-grown microcrystals and the determination of ground-state structures from different conditions is thus of considerable value in the early stages of a project. Here, a highly sample-efficient methodology to measure serial crystallography data from microcrystals by raster scanning within standard in situ 96-well crystallization plates is described. Structures were determined from very small quantities of microcrystal suspension and the results were compared with those from other sample-delivery methods. The analysis of a two-dimensional batch crystallization screen using this method is also described as a useful guide for further optimization and the selection of appropriate conditions for scaling up microcrystallization.

biochemistry & molecular biology,biochemical research methods,biophysics,crystallography
Laser Ablation and Injection Moulding as Techniques for Producing Micro Channels Compatible with Small Angle X-Ray Scattering

Richard Haider,Benedetta Marmiroli,Iakovos Gavalas,Marcell Wolf,Marco Matteucci,Rafael Taboryski,Anja Boisen,Emmanuel Stratakis,Heinz Amenitsch

DOI: https://doi.org/10.1016/j.mee.2018.03.015

2018-12-12

Abstract:Microfluidic mixing is an important means for in-situ sample preparation and handling while Small Angle X-Ray Scattering (SAXS) is a proven tool for characterising (macro-)molecular structures. In combination those two techniques enable investigations of fast reactions with high time resolution (<1 ms). The goal of combining a micro mixer with SAXS, however, puts constraints on the materials and production methods used in the device fabrication. The measurement channel of the mixer needs good x-ray transparency and a low scattering background. While both depend on the material used, the requirement for low scattering especially limits the techniques suitable for producing the mixer, as the fabrication process can induce molecular orientations and stresses that can adversely influence the scattering signal. Not only is it important to find a production method that results in a device with low background scattering, but it also has to be versatile enough to produce appropriate mixer designs. Here we discuss two methods - laser ablation of polycarbonate and injection moulding of Topas - which were found suitable for our needs, provided care is taken in aligning the mixing/reaction channel, where the actual measurements will be carried out. We find injection moulding to be the better of the two methods.

Applied Physics

[Masked depression].

Progress of crystallization in microfluidic devices

Flow‐Xl: a new facility for the analysis of crystallization in flow systems

Microfluidic Chips for In Situ Crystal X-ray Diffraction and In Situ Dynamic Light Scattering for Serial Crystallography

Microfluidic platform for optimization of crystallization conditions

In situ counter‐diffusion crystallization and long‐term crystal preservation in microfluidic fixed targets for serial crystallography

Droplet Microfluidics XRD Identifies Effective Nucleating Agents for Calcium Carbonate

Crystallization via tubing microfluidics permits both in situ and ex situ X-ray diffraction

Distributed Evolutionary Algorithm Search for Multiobjective Spanning Tree Problem

Droplet microfluidics for time-resolved serial crystallography

X-ray compatible microfluidics for in situ studies of chemical state, transport and reaction of light elements in an aqueous environment using synchrotron radiation

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Advances in Microfluidic Techniques for Nanoliter-Scale Protein Crystallization Screening

Deep Learning-Aided High-Throughput Screening of Time-Resolved Protein Crystallization on Programmable Microliter-Droplet Systems

A Microchip to Analyze Single Crystal Growth and Size-Controllability

In situ serial crystallography facilitates 96-well plate structural analysis at low symmetry

A microfluidic device for investigating crystal nucleation kinetics

Microfluidic Technology: Uncovering the Mechanisms of Nanocrystal Nucleation and Growth

Efficient in situ screening of and data collection from microcrystals in crystallization plates

Laser Ablation and Injection Moulding as Techniques for Producing Micro Channels Compatible with Small Angle X-Ray Scattering