Theoretical assessment of ketone ammoximation production using thermodynamic, techno-economic, and life cycle environmental analyses

Shuai Wang,Guoxuan Li,Xiao Yang,Fei Zhao,Peizhe Cui,Jianguang Qi,Zhaoyou Zhu,Yixin Ma,Yinglong Wang

DOI: https://doi.org/10.1016/j.jclepro.2020.121557

IF: 11.1

2020-08-01

Journal of Cleaner Production

Abstract:An assessment method that combines thermodynamic, techno-economic, and life cycle environmental analyses was applied to estimate the theoretical production of ketone ammoximation. Based on the reaction kinetics of ketone ammoximation, the effects of operating conditions on the conversion and selectivity were explored. The maximum acetone conversion and acetone oxime selectivity were 95% and 98%, respectively. The total annual cost was 1.29 × 107 $/year. The exergy efficiency was found to be more than 19.9%. The product-refining unit was considered as the unit with the largest exergy loss contribution, and the exergy loss rate was 68.5%. The thermodynamic analysis of the acetone oxime production process showed that its exergy loss could be reduced. The environmental performance of the acetone ammoximation process was determined by life cycle analysis. The results of environmental indicators showed that the GWP, AP, and ODP of the ketone ammoximation are 84815.4 kg·eq. CO2, 91.58 kg·eq. SO2, and 1.6 × 10−10 kg·eq. R11, respectively. This combination of life cycle environment, thermodynamic and techno-economic evaluation provides a basis for the improvement and sustainable development of the production process of ketoxime.

environmental sciences,green & sustainable science & technology,engineering, environmental

What problem does this paper attempt to address?

This paper mainly discusses the theoretical production of ketoxime oxidation reaction, and evaluates it through thermodynamics, techno-economic analysis, and life cycle environmental analysis. The study is based on the reaction kinetics of ketoxime oxidation, exploring the influence of operating conditions on conversion rate and selectivity. The results show that the maximum acetone conversion rate can reach 95%, and the acetone oxime selectivity is 98%. The annual total cost is 129 million US dollars. Thermodynamic analysis shows that the irreversibility loss of the process can be reduced. The environmental performance is determined by life cycle analysis, and the results show that the global warming potential, acidification potential, and ozone depletion potential of the process are 84815.4 kg eq. CO2, 91.58 kg eq. SO2, and 1.6 kg eq. R11, respectively. The paper proposes that the evaluation combining life cycle environmental, thermodynamic, and economic attributes provides a basis for the improvement and sustainable development of ketoxime production process. In addition, the study also considers aspects such as optimization of operating conditions, energy and material utilization, and economic costs to improve the production efficiency and environmental benefits of ketoxime.

Theoretical assessment of ketone ammoximation production using thermodynamic, techno-economic, and life cycle environmental analyses

Multi-objective optimization of a clean, high-efficiency synthesis process of methyl-ethyl-ketone oxime from ammoximation

Formation and transformation of nitroso compounds of ketoxime isomers in ketone ammoximation catalyzed by hollow titanium silicalite

Green Route to Synthesize Oxime

Study on the Side Reaction in Acetone Oxime Synthesis from Ammoxidation of Actone

Synthesis of Acetone Oxime Through Acetone Ammoximation over TS-1

General technoeconomic analysis for electrochemical coproduction coupling carbon dioxide reduction with organic oxidation

Thermodynamics and economic feasibility of acetone production from syngas using the thermophilic production host Moorella thermoacetica

Efficient Electrochemical Coupling of Nitrate and Biomass-derived Acetone to Acetoxime at High Current Density over Zn/Cu Hexagonal Nanosheets Catalyst

Techno-economic and energetic assessment of an innovative energy-saving separation process for electronic-grade acetone purification

Aqueous‐phase Ketonization of Acetic Acid over Zr/Mn Mixed Oxides

Electrocatalytic ORR–coupled ammoximation for efficient oxime synthesis

Molecular Dynamics-Assisted Process Design and Multi-Objective Optimization for Efficient Production of N-butyl Acetate by Reactive-Extractive Distillation/pervaporation

Cleaner and atomic economy production of hydroxylamine hydrochloride under solvent-free conditions through process intensification

A Bio-Catalytic Approach to Aliphatic Ketones

Economy, Exergy, Energy Consumption and Environmental Human Toxicity Potential Assessment of Vacuum Extractive Distillation Coupled Pervaporation Process for Separating Acetone/Isopropanol/Water Multi-azeotropes System

Co-Production of Dimethyl Carbonate, Dimethoxymethane and Dimethyl Ether from Methanol: Process Design and Exergy Analysis

Highly efficient catalytic production of oximes from ketones using in situ–generated H 2 O 2

Highly Efficient Catalytic Production of Oximes from Ketones Using in Situ-Generated H<sub>2</sub>O<sub>2</sub>

Apparent Kinetics and Thermodynamics Study of Methyl Ethyl Ketone Peroxide in Efficient Continuous-Flow Microreaction System and Its Kiloton Pilot Plant

Techno-economic analysis of production of octane booster components derived from lignin