Abstract:Multi-objective optimization using genetic algorithm (GA) is carried out for the desalination of brackish and sea water using spiral wound or tubular modules. A few sample optimization problems involving two and three objective functions are solved, both for the operation of an existing plant (which is almost trivial), as well as, for the design of new plants (associated with a higher degree of freedom). The possible objective functions are: maximize the permeate throughput, minimize the cost of desalination, and minimize the permeate concentration. The operating pressure difference, ΔP, across the membrane is the only important decision variable for an existing unit. In contrast, for a new plant, ΔP, the active area, A, of the membrane, the membrane to be used (characterized by the permeability coefficients for salt and water), and the type of module to be used (spiral wound/tubular, as characterized by the mass transfer coefficient on the feed-side), are the important decision variables. Sets of non-dominated (equally good) Pareto solutions are obtained for the problems studied. The binary coded elitist non-dominated sorting genetic algorithm (NSGA-II) is used to obtain the solutions. It is observed that for maximum throughput, the permeabilities of both the salt and the water should be the highest for those cases studied where there is a constraint on the permeate concentration. If one of the objective functions is to minimize the permeate concentration, the optimum permeability of salt is shifted towards its lower limit. The membrane area is the most important decision variable in designing a spiral wound module for desalination of brackish water as well as seawater, whereas ΔP is the most important decision variable in designing a tubular module for the desalination of brackish water (where the quality of the permeate is of prime importance). The results obtained using NSGA-II are compared with those from recent, more efficient, algorithms, namely, NSGA-II-JG and NSGA-II-aJG. The last of these techniques appears to converge most rapidly.

Multi objective optimization of novel phase change material-based desalination system using genetic algorithms

Multi-objective optimization of reverse osmosis desalination units using different adaptations of the non-dominated sorting genetic algorithm (NSGA)

Multi-objective optimization of a forward osmosis process for desalination using a non-dominated sorting genetic algorithm

Parametric study and multi-objective optimization of a combined cooling, desalination and power system

Optimizing Solar Desalination: Integrating Predictive Models with Thermal Energy Storage for Enhanced Efficiency and Sustainability

Optimizing solarized desalination unit through the implementation of 4-step MED method using energy, exergy, economic and environmental analysis

Energy, Economic and Environmental (3E) Analysis and Multi-Objective Optimization of a Spray-Assisted Low-Temperature Desalination System

Modeling and optimization of hollow fiber DCMD module for desalination

Experimental and Mechanism Analysis of a Tandem Solar Thermal System with Staged Water Level Reduction

Numerical Modeling Based Machine Learning Approach for the Optimization of Falling - Film Evaporator in Thermal Desalination Application

A rapid-convergent particle swarm optimization approach for multiscale design of high-permeance seawater reverse osmosis systems

Tri-objective optimization of a waste-to-energy plant with super critical carbon dioxide and multi-effect water desalination for building application based on biomass fuels

Integrating Geothermal Energy and Desalination Unit into a Poly-Generation Configuration: Comprehensive Study and Optimization

Thermoeconomic Analysis and Optimization of A Reverse Osmosis Desalination System Driven by Ocean Thermal Energy and Solar Energy

Hybrid air conditioning and seawater desalination system assisted by solar energy: thermoeconomic investigation and optimization

Modeling and Multi-Objective Optimization of Vacuum Membrane Distillation for Enhancement of Water Productivity and Thermal Efficiency in Desalination

Hybrid desalination system driven by solar energy: Optimization and case study

Optimizing solar still performance: A response surface methodology approach to evaporation and condensation enhancement

Multi-objective optimization and comprehensive Thermodynamic, economic, and environmental analysis of an innovative solar-geothermal integrated system for synergistic power generation and water desalination

Modeling and Performance Analysis of High-Efficiency Thermally-Localized Multistage Solar Stills

The energy efficiency of multistage interfacial desalination: Comprehensive analysis and further improvement strategy