Hexopyranoside: cytochrome c oxidoreductase from Agrobacterium tumefaciens.

J. V. Van Beeumen,J. De Ley

European Journal of Biochemistry

Abstract:

What problem does this paper attempt to address?

Characterization and quantification of unintentional POP emissions from primary and secondary copper metallurgical processes in China

Zhiqiang Nie,Guorui Liu,Wenbin Liu,Bing Zhang,Minghui Zheng

DOI: https://doi.org/10.1016/j.atmosenv.2012.04.048

IF: 5

2012-01-01

Atmospheric Environment

Abstract:Field monitoring was conducted to update and develop unintentional persistent organic pollutant (unintentional POP) emission inventories for the copper metallurgy industry in China. In this study, emissions of six unintentional POPs comprised of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz) in stack gas and fly ash samples from primary and secondary copper smelters using different raw materials and technologies were measured and compared. Different concentrations, congener patterns and emission factors of unintentional POPs among four copper smelters were observed. Variations in unintentional POP emissions from several areas of a primary copper smelter were also investigated. The total emissions of unintentional POPs from primary and secondary copper production in 2010 in China were estimated respectively. These results provide a useful reference for the establishment of unintentional POP emission inventories and for policymakers to formulate control strategies to reduce unintentional POPs resulting from copper metallurgy.
Estimation And Congener-Specific Characterization Of Polychlorinated Naphthalene Emissions From Secondary Nonferrous Metallurgical Facilities In China

Te Ba,Minghui Zheng,Bing Zhang,Wenbin Liu,Guijin Su,Guorui Liu,Ke Xiao

DOI: https://doi.org/10.1021/es9033342

IF: 11.4

2010-01-01

Environmental Science & Technology

Abstract:Secondary nonferrous production is addressed as one of the potential sources of the unintentionally produced persistent organic pollutants (UP-POPs) due to the impurity of raw material. Although there are inventories of dioxin emissions from secondary nonferrous metallurgical facilities, release inventories of polychlorinated naphthalenes (PCNs) are scarce. This study selected typical secondary copper, aluminum, zinc, and lead plants to investigate the emissions of PCNs in secondary nonferrous production in China. The toxic equivalency (TEQ) emission factor for PCNs released to the environment is highest for secondary copper production, at 428.4 ng TEO t(-1), followed by secondary aluminum, zinc, and lead production, at 142.8, 125.7, and 20.1 ng TEQ t(-1), respectively. PCNs released in secondary copper, aluminum, lead, and zinc production in China are estimated to be 0.86, 0.39, 0.009, and 0.01 g TEQ a(-1), respectively. Analysis of stack gas emission from secondary nonferrous production revealed that less-chlorinated PCNs are the dominant homologues, with mono- to tri-CNs making the most important contributions to the concentration. However, for fly ash, the more highly chlorinated PCNs such as octa-CN are the dominant homologues.
Understanding Aqueous Trace Metal Characteristics from Industrial Sources in China

Wenjun Wu,Jinnan Wang,Jun Bi,Zengwei Yuan,Hongqiang Jiang,Lingxuan Liu

DOI: https://doi.org/10.2166/wp.2015.071

2015-01-01

Water Policy

Abstract:Trace metals are a group of toxic pollutants that can cause serious damage to ecosystems and humans. To determine the distribution characteristics of aqueous trace metal contamination and identify critical pollution sources, it is necessary to develop a detailed estimation of trace metal emissions. By considering emission-related factors in each industrial sector, we estimate that the emissions were approximately 2, 61 t, 2,684 t, 301 t and 309 t for mercury, cadmium, chromium, arsenic and lead, respectively, in 2010 in China. These values are much higher than those provided in annual statistical reports. Our research identified critical emissions sources, including Shandong, Henan, Jiangsu and Guangdong Provinces and Raw Chemical, Non-ferrous Smelting, Non-ferrous Mining and Metal Products industries. However, Shandong and Metal Products are ignored in ‘The Twelfth 5-Year Plan for Complete Control of Trace Metal Pollution’. This research generally found that the allowable discharge levels had a significant impact on specific sectors. Total emissions are much lower than the maximum allowable under current Chinese emissions regulations but exceed limits recommended by Integrated Pollution Prevention and Control (European Union). Furthermore, our study found that many regions located along upstream reaches of the Yangtze River, like Sichuan Province, are sources of cross-boundary pollution.
Estimation and characterization of PCDD/Fs and dioxin-like PCB emission from secondary zinc and lead metallurgies in China.

Te Ba,Minghui Zheng,Bing Zhang,Wenbin Liu,Guijin Su,Ke Xiao

DOI: https://doi.org/10.1039/b818555g

2009-01-01

Journal of Environmental Monitoring

Abstract:Secondary zinc and lead production is addressed as one of the potential sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) due to the impurity of the raw material. However, the release inventory of PCDD/Fs and dioxin-like PCBs is very scarce for these secondary nonferrous metallurgies. This study selected typical secondary zinc and lead plants to investigate the emissions of PCDD/Fs and dioxin-like PCBs released from such plants in China. The toxic equivalent quantity (TEQ) emission factor of PCDD/Fs and dioxin-like PCBs released into the environment is higher for secondary zinc production, at 52 298.02 ng TEQ ton(-1) than for secondary lead production, at 646.05 ng TEQ ton(-1). The most abundant congeners of PCDD/Fs are 2,3,4,7,8-PeCDF and 1,2,3,4,6,7,8-HpCDF for the secondary zinc and lead metallurgies, respectively. The most abundant congener of dioxin-like PCBs in the samples collected from both metallurgies is CB-126. According to the distribution of PCDD/Fs (PCDF/PCDD >> 1) and the dominant contribution of higher chlorinated congeners, the de novo synthesis is assumed to be the main formation pathway of PCDD/Fs in the secondary zinc metallurgies. For the secondary lead metallurgies, the role of precursor formation is also very important. Based on the emission factor and production level, the total estimated emission amounts of PCDD/Fs and dioxin-like PCBs in both stack gas and fly ash released into the environment from secondary zinc and lead production is estimated to be at least 2.76 and 0.42 g TEQ yr(-1), respectively. The dioxin-like PCBs contribute 2.8% and 0.6% of the total emission from secondary zinc and lead plants, respectively.
Polychlorinated dibenzo-p-dioxin and dibenzofuran and polychlorinated biphenyl emissions from different smelting stages in secondary copper metallurgy.

Jicheng Hu,Minghui Zheng,Zhiqiang Nie,Wenbin Liu,Guorui Liu,Bing Zhang,Ke Xiao

DOI: https://doi.org/10.1016/j.chemosphere.2012.08.003

IF: 8.8

2013-01-01

Chemosphere

Abstract:Secondary copper production has received much attention for its high emissions of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) reported in previous studies. These studies focused on the estimation of total PCDD/F and polychlorinated biphenyl (PCB) emissions from secondary copper smelters. However, large variations in PCDD/F and PCB emissions reported in these studies were not analyzed and discussed further. In this study, stack gas samples at different smelting stages (feeding-fusion, oxidation and deoxidization) were collected from four plants to investigate variations in PCDD/F and PCB emissions and characteristics during the secondary copper smelting process. The results indicate that PCDD/F emissions occur mainly at the feeding-fusion stage and these emissions contribute to 54-88% of the total emissions from the secondary copper smelting process. The variation in feed material and operating conditions at different smelting stages leads to the variation in PCDD/F emissions during the secondary copper smelting process. The total PCDD/F and PCB discharge (stack gas emission+fly ash discharge) is consistent with the copper scrap content in the raw material in the secondary copper smelters investigated. On a production basis of 1 ton copper, the total PCDD/F and dl-PCB discharge was 102, 24.8 and 5.88 μg TEQ t(-1) for the three plants that contained 100%, 30% and 0% copper scrap in their raw material feed, respectively.
Emission characterization of unintentionally produced persistent organic pollutants from iron ore sintering process in China.

Bo Tian,Jun Huang,Bin Wang,Shubo Deng,Gang Yu

DOI: https://doi.org/10.1016/j.chemosphere.2012.05.069

IF: 8.8

2012-01-01

Chemosphere

Abstract:Emission of unintentionally produced persistent organic pollutants (Unintentional POPs), including polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychorinated biphenyls (PCBs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz), were investigated in four typical iron ore sintering plants in China. The emission factors and annual mass releases of the Unintentional POPs were calculated. The results indicated that PCDFs contributed more than 60% to the overall toxic equivalent quantity (TEQ) values, while the contribution of the dl-PCBs is relatively low, and only in the range of 8-9%. The dominant congeners of PCDD/Fs and dl-PCBs contributing most to the total TEQ were 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and PCB-126. With regard to the TEQ contributions, the most abundant homologues were PeCDFs and HxCDD/Fs, followed by PeCDDs and non-ortho dl-PCB, whereas HpCDD/Fs, OCDD/Fs and mono-ortho dl-PCBs almost made no contributions. Due to the massive use of recycled waste in the feeding materials, the average emission factor of PCDD/Fs and dl-PCBs of the four plants was 3.95 μg WHO-TEQ ton(-1). Based on the results, the annual release of PCDD/Fs and dl-PCBs in 2007-2009 were estimated to be 2070 g, 2212 g, and 2307 gWHO-TEQ, respectively.
Unintentional Production of Persistent Chlorinated and Brominated Organic Pollutants During Iron Ore Sintering Processes.

Sumei Li,Guorui Liu,Minghui Zheng,Wenbin Liu,Jinhui Li,Mei Wang,Changliang Li,Yuan Chen

DOI: https://doi.org/10.1016/j.jhazmat.2017.02.027

IF: 13.6

2017-01-01

Journal of Hazardous Materials

Abstract:Iron ore sintering (SNT) processes are major sources of unintentionally produced chlorinated persistent organic pollutants (POPs), including polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs). However, few studies of emissions of brominated POPs, such as polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and polybrominated diphenyl ethers (PBDEs), during SNT have been performed. Stack gas and fly ash samples from six typical SNT plants in China were collected and analyzed to determine the concentrations and profiles of PCDD/Fs, PCBs, PCNs, PBDD/Fs, and PBDEs, as well as any correlations among these compounds. The PCDD/F, PCB, PCN, PBDD/F, and PBDE emission factors were 2.47, 0.61, 552, 0.32, and 107μgt-1, respectively (109, 4.07, 10.4, 4.41 and 0.02ng toxic equivalents t-1, respectively). PCBs were the most abundant compounds by mass, while PCNs were the next most abundant, contributing 51% and 42% to the total POP concentration, respectively. However, PCDD/Fs were the dominant contributors to the chlorinated and brominated POP toxic equivalent concentrations, contributing 89% to the total toxic equivalent concentration. The PCDD/F and other chlorinated and brominated POP concentrations were positively correlated, indicating that chlorinated and brominated POP emissions could be synergistically decreased using the best available technologies/best environmental practices already developed for PCDD/Fs.
Estimation and Characterization of PCDD/Fs, Dl-Pcbs, PCNs, HxCBz and PeCBz Emissions from Magnesium Metallurgy Facilities in China.

Zhiqiang Nie,Minghui Zheng,Wenbin Liu,Bing Zhang,Guorui Liu,Guijin Su,Pu Lv,Ke Xiao

DOI: https://doi.org/10.1016/j.chemosphere.2011.09.016

IF: 8.8

2011-01-01

Chemosphere

Abstract:Magnesium production is considered to be one potential source of unintentional persistent organic pollutants (unintentional POPs). However, studies on the emissions of unintentional POPs from magnesium metallurgy are still lacking. Emissions of unintentional POPs, such as polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz) are covered under the Stockholm Convention. In this study, these emissions were investigated through a magnesium smelting process. Stack gas and fly ash samples from a typical magnesium plant in China were collected and analyzed to estimate the emissions of unintentional POPs from magnesium metallurgy. Emissions factors of 412ngTEQt−1 for PCDD/Fs, 18.6ngTEQt−1 for dl-PCBs, 3329μgt−1 for PCNs, 820μgt−1 for HxCBz, and 1326μgt−1 for PeCBz were obtained in 2009. Annual emissions from magnesium metallurgy in China were estimated to be 0.46g WHO-TEQ for PCDD/Fs and dl-PCBs, 1651g for PCNs, 403g for HxCBz and 653g for PeCBz, respectively.
Estimation and Characterization of PCDD/Fs and Dioxin-Like PCBs from Secondary Copper and Aluminum Metallurgies in China.

Te Ba,Minghui Zheng,Bing Zhang,Wenbin Liu,Ke Xiao,Lifei Zhang

DOI: https://doi.org/10.1016/j.chemosphere.2009.02.052

IF: 8.8

2009-01-01

Chemosphere

Abstract:The secondary metallurgy industry is considered as one source of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emissions amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) released from secondary aluminum and copper metallurgy industries in China. The congener patterns are shown and the formation mechanism is also discussed in this paper.The toxic equivalency (TEQ) emission factor of PCDD/Fs is higher for secondary copper production, at 14802 ng TEQ t(-1) than for secondary aluminum production, at 2650 ng TEQ t(-1). However, the TEQ emission factor of dioxin-like PCBs of secondary aluminum production, with 193 ng TEQ t(-1), is higher than that of secondary copper production with 98.1 ng TEQ t(-1). The total estimated emission amount of PCDD/Fs released to air from the production of 2.75 million tons secondary aluminum and 2 million tons secondary copper in 2007 are 7.3 and 37.5 g TEQ yr(-1). respectively, the corresponding dioxin-like PCBs total emission amounts being 0.53 and 0.2 g TEQ yr(-1) respectively. In general, the emission factors and the total emission amounts of the secondary aluminum and copper metallurgies in China stay in the middle level compared to values reported for other countries.The most abundant congener of PCDD/Fs; is 2,3,4,7,8-PeCDF and the most abundant congener of dioxin-like PCBs is CB-126 in samples collected from both secondary aluminum and copper metallurgies. According to the distribution of organochlorocompounds (PCDF > PCDD > PCB, PCDF/PCDD >> 1) and the dominant contribution of higher chlorinated congeners, the de nova synthesis is assumed to be the main formation pathway of PCDD/Fs and PCBs in the secondary copper and aluminum metallurgies. (C) 2009 Elsevier Ltd. All rights reserved.
Emission of Unintentionally Produced Persistent Organic Pollutants (upops) from Municipal Waste Incinerators in China.

Yuancheng Li,Yang,Gang Yu,Jun Huang,Bin Wang,Shubo Deng,Yujue Wang

DOI: https://doi.org/10.1016/j.chemosphere.2016.05.037

IF: 8.8

2016-01-01

Chemosphere

Abstract:Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), pentachlorobenzene (PeCBz) and hexachlorobenzene (HxCBz), which are listed in the Stockholm Convention, are commonly known as unintentionally produced persistent organic pollutants (UPOPs). As municipal waste incinerators (MWIs) have burgeoned in China, the emission of UPOPs is of great concerns. Compared to the extensive studies of PCDD/Fs emission, not much information of non-dioxin UPOPs (i.e., PCBs, HxCBz, and PeCBz) is available. In the present study, samples from raw gas (RG) after boiler, stack gas (SG) after air pollution control devices (APCDs) and fly ash (FA) samples were collected from typical MWIs in China. The analyses of SG samples indicate that PCDD/Fs are the major contributor to TEQ value, but non-dioxin UPOPs are the dominant compounds in terms of mass concentration. The mean emission factors of dl-PCBs, PeCBz, and HxCBz in SG are 0.372, 144, and 84.7 μg/t, respectively. In contrast with gaseous samples, FA contains higher mass concentration of PCDD/Fs and PCBs than that of PeCBz and HxCBz. In terms of homologues distribution of PCBs, di- to tetra-CBs were the predominant species in both SG and FA samples. PCB-126 is the major contributor to the TEQ concentration. The comparison of UPOPs composition in SG and RG samples shows that activated carbon adsorption process is capable of removing most PCDD/Fs, but less efficient for the removal of non-dioxin UPOPs.
Potential sources of unintentionally produced PCB, HCB, and PeCBz in China: A preliminary overview

Xiaotu Liu,Heidelore Fiedler,Wenwen Gong,Bin Wang,Gang Yu

DOI: https://doi.org/10.1007/s11783-018-1036-9

2018-05-16

Abstract:Under the Stockholm Convention on Persistent Organic Pollutants (POPs), China is required not only to reduce polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) but also unintentionally produced polychlorinated biphenyls (PCB), hexachlorobenzene (HCB) and pentachlorobenzene (PeCBz). A baseline of the sources in China that generate these unintentional POPs is needed for both research and regulation purposes. In this paper, we have compiled production data of potential sources in China and assessed them in five-year intervals from 2000 to 2015. Most of these activities experienced changes from rapid growth to slow growth. Measured data for PCB, HCB and PeCBz in samples collected from potential sources in China were reviewed. Most information was associated to thermal processes with high potential of emission, including waste incineration and ferrous and non-ferrous metal production. In addition, high levels of PCB, HCB and PeCBz were found as impurities in a few chlorinated products or as by-products in solvent production, which suggested organochlorine industry might be important sources. Finally, based on the studies reviewed, recommendations for future actions in research and policy as well as a few regulatory issues in China are discussed.

environmental sciences,engineering, environmental
Reassessment and Update of Emission Factors for Unintentional Dioxin-Like Polychlorinated Biphenyls

Wenwen Gong,Heidelore Fiedler,Xiaotu Liu,Bin Wang,Gang Yu

DOI: https://doi.org/10.1016/j.scitotenv.2017.05.068

IF: 9.8

2017-01-01

The Science of The Total Environment

Abstract:One of the major goals of the Stockholm Convention on Persistent Organic Pollutants is to continuously reduce the releases of unintentional persistent organic pollutants (POPs) such as polychlorinated dibenzo-para-dioxins and dibenzofurans (PCDD/PCDF) or polychlorinated biphenyls (PCB) from anthropogenic sources. Until now, most efforts have focused on the releases of PCDD/PCDF and to a lesser extent on unintentionally generated PCB, and therefore, release inventories reported as toxic equivalents (TEQ) do not include the twelve dioxin-like PCB (dl-PCB). In order to facilitate the development of national release inventories for the total TEQ – consisting of PCDD, PCDF and PCB - this study collected and summarized published emission factors (EFs) of unintentional dl-PCB or calculated them from measured data for the sources listed in the UNEP Toolkit. In total, 286 EFs for dl-PCB were found (or could be calculated) whereby 233 described release to air, 23 EFs addressed to residue, 25 EFs to product; and only 5 EFs addressed releases to land. Taking into account performance criteria such as the facility type and scale or abatement technologies, the EFs were grouped and assigned to the source categories and/or classes used in the UNEP Toolkit. With these newly added data and EFs of dl-PCB, the already existing EFs in the Toolkit can be improved and amended. In addition, a statistically significant correlation between the EFAir of dl-PCB proposed in this study and EFAir of PCDD/PCDF recommended in the Toolkit was observed.
Atmospheric Emission Of Pcdd/Fs, Pcbs, Hexachlorobenzene, And Pentachlorobenzene From The Coking Industry

Guorui Liu,Minghui Zheng,Wenbin Liu,Chengzhi Wang,Bing Zhang,Lirong Gao,Guijin Su,Ke Xiao,Pu Lv

DOI: https://doi.org/10.1021/es902429m

IF: 11.4

2009-01-01

Environmental Science & Technology

Abstract:The coking process is considered to be a potential source of unintentionally produced persistent organic pollutants (UP-POPs). However, intensive studies on the emission of UP-POPs from the coking industry are still very scarce. Emission of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), hexachlorobenzene (HxCBz), and pentachlorobenzene (PeCBz) covered under the Stockholm Convention were investigated for the coking process in this study. Stack gases from some typical coke plants in China were collected and analyzed to estimate the emission of UP-POPs from the coking industry. Emission factors of 28.9 ng WHO-TEQ tonne(-1) for PCDD/Fs, 1.7 ng WHO-TEQ tonne(-1) for dl-PCBs, 596 ng tonne-1 for HxCBz, and 680 ng tonne(-1) for PeCBz were derived based on the investigated data. The annual emissions from the global coking industry were estimated to be 15.8 g WHO-TEQ for PCDD/Fs, 0.93 g WHO-TEQ for dl-PCBs, 333 g for HxCBz, and 379 g for PeCBz, respectively (reference year 2007). According to the distribution of PCDD/Fs, we argued for the de novo synthesis to be the major pathway of PCDD/F formation. With regard to the characteristics of dl-PCBs, the most abundant congener was CD-118, and the most dominant contributor to the total WHO-TEQ of dl-PCBs was CB-126.
A preliminary investigation of unintentional POP emissions from thermal wire reclamation at industrial scrap metal recycling parks in China.

Zhiqiang Nie,Minghui Zheng,Guorui Liu,Wenbin Liu,Pu Lv,Bing Zhang,Guijin Su,Lirong Gao,Ke Xiao

DOI: https://doi.org/10.1016/j.jhazmat.2012.02.062

IF: 13.6

2012-01-01

Journal of Hazardous Materials

Abstract:Thermal wire reclamation is considered to be a potential source of unintentional persistent organic pollutants (unintentional POPs). In this study, unintentional POP concentrations, including PCDD/Fs, dioxin like PCBs (dl-PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz), were quantified in flue gas and residual ash emissions from thermal wire reclamation at scrap metal dismantling parks in Zhejiang Province, China. The total average TEQ emissions of the investigated unintentional POPs from flue gas and residual ash in two typical scrap metal recycling plants ranged from 13.1 to 48.3ngTEQNm(-3) and 0.08 to 2.8ngTEQg(-1), respectively. The dominant PCDD/F congeners were OCDD, 1,2,3,4,6,7,8-HpCDD, OCDF and 1,2,3,4,6,7,8-HpCDF, while PCB-126 and PCB-169 were the main contributors to the toxicity of the dl-PCBs. There were clear differences in the distribution dl-PCBs congeners contributing to the TEQ concentrations in the flue gas samples from the two plants. The PCN TEQs were dominated by PCN-66/67 and PCN-73. Although thermal wire reclamation in incinerators has been proposed as an alternative to open burning, there are still considerable environmental risks associated with regulated incinerators, and unintentional POP emissions from thermal wire reclamation sites need to be controlled by local government agencies.
PCDD/Fs emissions from secondary copper production synergistically controlled by fabric filters and desulfurization

Haifeng Li,Wenbin Liu,Anxiang Lu,Cheng Li,Qingqi Die,Rongrong Lei,Xiaolin Wu

DOI: https://doi.org/10.1016/j.envpol.2020.116065

IF: 8.9

2021-02-01

Environmental Pollution

Abstract:The effects of fabric filters and desulfurization systems during secondary copper smelting on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) concentrations, emission coefficients, and profiles were studied in an oxygen-rich smelting furnace and an anode furnace. In the anode furnace, the toxic equivalent (TEQ) concentration ranges were 0.106-1.04 ng World Health Organization (WHO)-TEQ/m3 at the fabric filters inlet and 0.027-0.17 ng WHO-TEQ/m3 at the outlet. For the oxygen-rich smelting furnace, the TEQ concentration ranges were 1.21-1.93 and 0.010-0.019 ng WHO-TEQ/m3 at the desulfurization system inlet and outlet, respectively. The TEQs in the outlet stack gases of the desulfurization system from the anode furnace were 0.0041-0.016 ng WHO-TEQ/m3. It is likely that PCDD/Fs that were taken away from the stack gases were adsorbed by the fly ash and gypsum. Solid residues were the dominant release routes for PCDD/Fs. PCDD/Fs congener and homologue profiles of stack gases from different smelting stages were similar. The contributions of more chlorinated homologues from the anode furnace decreased observably after the stack gases passed through the fabric filters. However, the desulfurization process did not greatly change the PCDD/Fs homologue profiles. Overall, both the fabric filters and desulfurization systems showed excellent removal efficiencies for PCDD/Fs in the stack gases, which reduced the TEQ emissions to well below the 0.5 ng WHO-TEQ/m3 to achieve standard discharge.

environmental sciences
Estimation of emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls from chinese hot dip galvanizing industries

Pu Lv,Minghui Zheng,Wenbin Liu,Bing Zhang,Guorui Liu,Guijin Su,Zhiqiang Nie

DOI: https://doi.org/10.1089/ees.2010.0493

IF: 2.1723

2011-01-01

Environmental Engineering Science

Abstract:Hot dip galvanizing industry is considered an emission source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from ash and precipitate in Chinese hot dip galvanizing industry. Concentrations and toxicity equivalents (TEQs) of PCDD/Fs and DL-PCBs were determined. Due to the degreasing step that reduced the contents of organic materials and chlorine in Chinese hot dip galvanizing, the concentration of PCDD/Fs and DL-PCBs in the samples was not as high as expected. Mean WHO-TEQ of PCDD/Fs and DL-PCBs in samples was 15.7 pg g(-1). Contributions of 2,3,7,8-TCDD, 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF, and CB-126 dominated the total TEQs. We estimated the emissions of PCDD/Fs from Chinese hot dip galvanizing industries using the solvent method. The mean emission factor for PCDD/Fs and DL-PCBs released to residue was 9.50 ng TEQ ton(-1) of the product. The total emission amount of PCDD/Fs and DL-PCBs released to residue in the hot dip galvanizing industries using the solvent method was 280mg WHO-TEQ year(-1) in China. Results obtained in this study will be helpful for decision makers in prioritizing sources of PCDD/Fs.
Identification and Characterization of the Atmospheric Emission of Polychlorinated Naphthalenes from Electric Arc Furnaces

Guorui Liu,Minghui Zheng,Bing Du,Zhiqiang Nie,Bing Zhang,Jicheng Hu,Ke Xiao

DOI: https://doi.org/10.1007/s11356-012-1038-2

IF: 5.8

2012-01-01

Environmental Science and Pollution Research

Abstract:Electric arc furnaces (EAF) are well recognized as significant sources of dioxins. EAFs have also been speculated to be sources of polychlorinated naphthalenes (PCNs) due to the close correlation between dioxin and PCN formation. However, assessment on PCN emissions from EAFs has not been carried out. The primary aim of this preliminary study is to identify and characterize the atmospheric emission of PCNs from EAFs. In this preliminary study, stack gas samples from two typical EAFs with different scales (EAF-1, 160 t batch −1 ; and EAF-2, 60 t batch −1 ) were collected by automatic isokinetic sampling technique, and PCN congeners in samples were analyzed by isotope dilution high-resolution gas chromatography combined with high-resolution mass spectrometry method. Emission concentrations of PCNs were 458 and 1,099 ng m −3 for EAF-1 and EAF-2, respectively. The emission factors of PCNs to air were 21.6 and 30.1 ng toxic equivalent t −1 for EAF-1 and EAF-2, respectively, which suggested that EAF is an important source of PCN release. With regard to the characteristics of PCNs from EAFs, lower chlorinated homologues were dominant. The PCN congeners comprised of CN27/30, CN52/60, CN66/67, and CN73 were the most abundant congeners for tetra-, penta-, hexa-, and hepta-chlorinated homologues, respectively. EAFs were identified to be an important PCN source, and the obtained data are useful for developing a PCN inventory. The congener profiles of PCNs presented here might provide helpful information for identifying the specific sources of PCNs emitted from EAFs.
Emission characteristics and relationships among PCDD/Fs, chlorobenzenes, chlorophenols and PAHs in the stack gas from two municipal solid waste incinerators in China

Tianjiao Wang,Tong Chen,Binbin Lin,Xiaoqing Lin,Ming-Xiu Zhan,Xiaodong Li

DOI: https://doi.org/10.1039/c7ra04168c

IF: 4.036

2017-01-01

RSC Advances

Abstract:An extensive investigation was conducted to understand polychlorinated dibenzo-p-dioxin and furan (PCDD/F) formation mechanisms and their relationships with chlorobenzenes (CBzs), chlorophenols (CPhs) and polycyclic aromatic hydrocarbons (PAHs) in the stack gas from two fluidized bed municipal solid waste incinerators in China. The toxic equivalent quantity (TEQ) value and the concentration of target compounds changed with the incinerator operating conditions. CPhs and PAHs were much more sensitive to operation conditions and were affected more easily by change. Only 2-monochlorophenol revealed a negative linear correlation (R-2 >= 0.7). More than half of the PAHs revealed an adequate correlation model with PCDD/F concentration (R-2 > 0.6), while CBzs showed almost perfect correlations with PCDD/Fs (R-2 >= 0.8, significance level a > 0.05). 123-Trichlorobenzene, 1234-tetrachlorobenzene and pentachlorobenzene revealed the best positive linear correlation (R-2 > 0.9). PCDFs were revealed to be the best target compounds for indication due to the similar formation variation trend to that of other precursors. Unary and multiple linear regression equations with high coefficients of determination between several CBz, PAHs and PCDD/Fs, TEQ and PCDFs were established. The detailed relationships among PCDD/F homologues, isomers and other compounds and their formation mechanism were also discussed.
Polychlorinated Biphenyl Emissions from Steelmaking Electric Arc Furnaces

Jia Shen,Lili Yang,Qiuting Yang,Xiaoguang Zhao,Guorui Liu,Minghui Zheng

DOI: https://doi.org/10.1007/s00128-021-03105-x

Abstract:Electric arc furnaces (EAFs) in steelmaking plants are a major source of dioxins. Preheating of steelmaking raw materials is widely used in EAFs to reduce energy consumption. Few studies have investigated emissions of dioxin-like polychlorinated biphenyls (PCBs) from EAFs, and the PCB emission levels and characteristics during preheating are unknown. In this study, PCB concentrations and distributions in stack gases emitted during EAF preheating were determined. The average dioxin-like PCB concentrations in stack gases emitted during preheating of three EAFs were 1236.1, 81,664.4, and 669.8 pg/Nm3, respectively. These values were greatly influenced by the composition of the steelmaking raw materials. The PCB profiles in all samples were dominated by less-chlorinated homologs. PCB emission factor for preheating in the EAFs is 0.58 µg WHO-TEQ/ton averagely, indicating significant emissions of PCBs from preheating process. The data will be useful for developing approaches for preventing and controlling PCB emissions from EAFs.
Pilot study on the effect of secondary copper smelters on polychlorinated naphthalene contamination in surrounding agricultural areas

Shujun Dong,Su Zhang,Yun Zou,Tong Li,Ruiguo Wang,Yaxin Wang,Yin Zhao,Jie Cheng,Guanglong Wu,Peilong Wang

DOI: https://doi.org/10.1016/j.scitotenv.2022.158223

2022-12-15

Abstract:Polychlorinated naphthalenes (PCNs) are dioxin-like persistent organic pollutants that are primarily produced unintentionally during industrial thermal processes. These compounds are harmful to the environment and human health. This study investigated the occurrences of all 75 PCN congeners in agricultural areas near secondary copper smelters in China. The PCN concentrations in aquatic foods, eggs, crops, sediments and soils within 10 km of these smelters were higher than those in samples collected 20-30 km away from such facilities. In contrast, the PCN concentrations in compound animal feed samples collected at different distances from the secondary copper smelters were comparable to one another. Similar PCN homologue patterns were found in crop, egg, feed and soil samples collected at different distances from the smelters but the homologue profiles of PCNs in aquatic food and sediment samples collected from different distances varied. Lower chlorinated naphthalenes were the predominant homologues in most samples. The contamination of farm animals and crops with PCNs might result from the emission of these compounds from such sources into the surrounding environment. However, the health risks associated with human exposure to PCNs through food consumption are low for both distances (<10 km and 20-30 km) from secondary copper smelters.

Hexopyranoside: cytochrome c oxidoreductase from Agrobacterium tumefaciens.

Characterization and quantification of unintentional POP emissions from primary and secondary copper metallurgical processes in China

Estimation And Congener-Specific Characterization Of Polychlorinated Naphthalene Emissions From Secondary Nonferrous Metallurgical Facilities In China

Understanding Aqueous Trace Metal Characteristics from Industrial Sources in China

Estimation and characterization of PCDD/Fs and dioxin-like PCB emission from secondary zinc and lead metallurgies in China.

Polychlorinated dibenzo-p-dioxin and dibenzofuran and polychlorinated biphenyl emissions from different smelting stages in secondary copper metallurgy.

Emission characterization of unintentionally produced persistent organic pollutants from iron ore sintering process in China.

Unintentional Production of Persistent Chlorinated and Brominated Organic Pollutants During Iron Ore Sintering Processes.

Estimation and Characterization of PCDD/Fs, Dl-Pcbs, PCNs, HxCBz and PeCBz Emissions from Magnesium Metallurgy Facilities in China.

Estimation and Characterization of PCDD/Fs and Dioxin-Like PCBs from Secondary Copper and Aluminum Metallurgies in China.

Emission of Unintentionally Produced Persistent Organic Pollutants (upops) from Municipal Waste Incinerators in China.

Potential sources of unintentionally produced PCB, HCB, and PeCBz in China: A preliminary overview

Reassessment and Update of Emission Factors for Unintentional Dioxin-Like Polychlorinated Biphenyls

Atmospheric Emission Of Pcdd/Fs, Pcbs, Hexachlorobenzene, And Pentachlorobenzene From The Coking Industry

A preliminary investigation of unintentional POP emissions from thermal wire reclamation at industrial scrap metal recycling parks in China.

PCDD/Fs emissions from secondary copper production synergistically controlled by fabric filters and desulfurization

Estimation of emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls from chinese hot dip galvanizing industries

Identification and Characterization of the Atmospheric Emission of Polychlorinated Naphthalenes from Electric Arc Furnaces

Emission characteristics and relationships among PCDD/Fs, chlorobenzenes, chlorophenols and PAHs in the stack gas from two municipal solid waste incinerators in China

Polychlorinated Biphenyl Emissions from Steelmaking Electric Arc Furnaces

Pilot study on the effect of secondary copper smelters on polychlorinated naphthalene contamination in surrounding agricultural areas