Determination of partial denitrification kinetic model parameters based on batch tests and metagenomic sequencing

Xinwei Su,Jianwei Li,Lei Wu,Xiyao Li,Qiong Zhang,Yongzhen Peng,Xiao-rong Zhu
DOI: https://doi.org/10.1016/j.biortech.2023.128977
IF: 11.4
2023-04-02
Bioresource Technology
Abstract:In this study, a model was developed to investigate the partial denitrification(PD) process. The heterotrophic biomass (X H ) proportion in the sludge was determined to be 66.4% based on metagenomic sequencing. The kinetic parameters were first calibrated, then validated using the batch tests results . The results showed rapid decreases in the chemical oxygen demand (COD) and nitrate concentrations and gradual increases in the nitrite concentrations in the first four hours, then remained constant from 4 to 8 h. Anoxic reduction factor (η NO3 and η NO2 ) and half saturation constant (K S1 and K S2 ) were calibrated at 0.097, 0.13, 89.28 mg COD/L, and 102.29 mg COD/L, respectively. Whereas the simulation results demonstrated that the increase in carbon-to-nitrogen (C/N) ratios and the reduction in X H contributed to the increase in the nitrite transformation rate. This model provides potential strategies for optimizing the PD/A process.
energy & fuels,biotechnology & applied microbiology,agricultural engineering
What problem does this paper attempt to address?