Abstract:Janus structural interfacial vaporization by separating the solar absorber from the bulk working fluid has attracted tremendous attention due to its low heat losses and high solar conversion efficiency for desalination, water purification, energy generation, etc. However, a totally separated double-deck structure with a discontinuous interfacial transition and inefficient photothermic materials undermines its long-term use and large-scale practical exploitation. Herein, a low-cost Janus monolithic chitosan aerogel with continuous aligned run-through microchannels has been demonstrated to have a highly efficient photothermic effect on seawater desalination and wastewater purification. The top solar absorber layer enhances broadband light absorption and photothermal conversion efficiency via the multiple internal reflection of incident light in the aligned microchannels. Moreover, the insulating/hydrophilic bottom layer promotes water transportation and heat localization, and simultaneously prevents salt/fouling accumulation. As a result, a long-term solar vaporization rate of ∼1.76 kg m<sup>–2</sup> h<sup>–1</sup> is achieved, corresponding to a light-to-vapor efficiency of ∼91% under 1 sun irradiation. Notably, the large-vessel microchannels throughout the aerogel and favorable swelling property provide sufficient water replenishment and storage for completely isolating self-contained evaporation, illustrating an enhanced and time-extended self-contained solar steam generation. Such a low-cost bilayer aerogel with remarkable cycling stability in various fluids offers potential opportunities for freshwater production in remote rural areas.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02198?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02198</a>.Pore size distribution and surface morphology of CS, CCS-60, CCS-240 and CCS-480; FT-IR spectra of the CCS-240 and CCS-480; Raman spectra of CCS-60, CCS-240 and CCS-480; XPS spectra of NFs and high–resolution XPS spectra of CS, CCS-60, CCS-240 and CCS-480 for N 1s and C 1s; thermogravimetric analysis (TGA) and differential thermal gravimetric (DTG) analysis of CS, CCS-60, CCS-240 and CCS-480; axial compressive stress-strain curves of CCS-240 and CCS-480; photographs of the soaking unchanged CCS-60 after two months; transmittance and reflectance spectra of CCS-240 and CCS-480; the hydrophilic property of CS, CCS-60, CCS-240 and CCS-480; calculation of evaporation conversion (photothermal) efficiency of CCS; interfacial water evaporation efficiency from the selected typical publications; the total pore volume of CS and CCS; calculation of estimating the cost of CCS; photographs of the swollen changes of CCS immersed in a solution with different pH values over time; calculation of absorption capacity; swelling measurements; evaporation mass loss in suspending and containing configurations; and infrared images of the solar evaporation processes of CCS-60 containing configuration at the beginning and after 5 h later (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02198/suppl_file/am1c02198_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

3D Janus structure MXene/cellulose nanofibers/luffa aerogels with superb mechanical strength and high-efficiency desalination for solar-driven interfacial evaporation

Multifunctional Super‐Hydrophilic MXene/Biomass Composite Aerogel Evaporator for Efficient Solar‐Driven Desalination and Wastewater Treatment

Self-contained Janus Aerogel with Antifouling and Salt-Rejecting Properties for Stable Solar Evaporation

Construction of a biomimetic wood structure with cellulose nanofiber/ molybdenum disulfide hybrid aerogel for highly-efficient solar-driven interfacial evaporation

Biomimetic vertically aligned aerogel with synergistic photothermal effect enables efficient solar-driven desalination

A Nature-Inspired Monolithic Integrated Cellulose Aerogel-Based Evaporator for Efficient Solar Desalination

Biomass-enhanced Janus sponge-like hydrogel with salt resistance and high strength for efficient solar desalination

Creating aligned porous structure with cobweb-like cellulose nanofibrils in MXene composite aerogel for solar-thermal desalination and humidity response

Janus aramid nanofiber aerogel incorporating plasmonic nanoparticles for high-efficiency interfacial solar steam generation

Design of a Pyrrole/Polyimide fiber-based Janus aerogel to suppress salt deposition and enhance solar steam generation performance

Sandwich-structured MXene/wood aerogel with waste heat utilization for continuous desalination

A 3D aerogel evaporator for efficient solar interfacial evaporation: Breaking through the upper limit of steam production rate

Boosting interfacial solar steam generation by three-dimensional bilayer cellulose aerogels

Bacterial cellulose-based porous Janus aerogels for efficient interfacial solar steam generation

Self-Descaling Janus Nanofibrous Evaporator Enabled by A "Moving Interface" for Durable Solar-Driven Desalination of Hypersaline Water

Robust 3D Graphene/Cellulose Nanocrystals Hybrid Lamella Network for Stable and Highly Efficient Solar Desalination

MXene Sediment-Based Poly(vinyl alcohol)/Sodium Alginate Aerogel Evaporator with Vertically Aligned Channels for Highly Efficient Solar Steam Generation

Multifunctional Solar Evaporator with Adjustable Island Structure Improves Performance and Salt Discharge Capacity of Desalination

Self Responsive Janus Hydrogel with Alternation of Day and Night for Highly Efficient Solar Evaporation

Watermelon flesh‐derived carbon aerogel with hierarchical porous structure for interfacial solar steam generation

Electrostatic self-assembly cellulose nanofibers/MXene/nickel chains for highly stable and efficient seawater evaporation and purification