Abstract:Recently, Carbon Nanotubes (CNTs) are drawing considerable attention of researchers for reinforcing cementitious materials due to their excellent mechanical properties and high aspect ratio (length-to-diameter ratio). However, CNTs might not disperse well within the cement matrix, resulting in little improvement or even degradation of concrete properties. The uncertainty in producing the consistent results in different studies might be attributed to multiple interactions between the experimental variables affecting the nanotube dispersion and the final properties of CNT-cement nanocomposites. Therefore, this research mainly focused on proposing equations that can reliably capture these interactions in order to correlate CNT dispersion with the mechanical properties. The main experimental variables studied included CNT concentration, aspect ratio, ultrasonication energy, ultrasonication amplitude, surfactant-to-CNTs ratio, water-to-cement ratio, sand-to-cement ratio, and hydration age of specimen. The study reported in this research was conducted in two parts: experimental program and modeling. In the experimental part of this research, a total of 63 different mix proportions were used to evaluate the flowability, mechanical properties, and durability characteristics of cement pastes and mortars containing CNTs. Using experimental test results reported in this study and the literature, three critical relations were proposed to consider the CNT dispersion, cement matrix composition, and hydration age of cement. The proposed critical relations were then added to available theoretical models in the literature. The flexural strength and elastic modulus of CNT-cement nanocomposites were predicted through a state-of-the-art probabilistic model using a Bayesian methodology. Finally, the developed probabilistic models were used to identify the optimum ranges of the experimental variables to maximize the mechanical properties. This was done through computing the conditional probability of not meeting the specified design requirement. The experimental results indicated that addition of CNTs could significantly improve different properties of cementitious materials, if the optimum range of each variable was used. Also, to achieve the desired mechanical properties, various combinations of the experimental variables might be used. The proposed prediction models were shown to capture the interactions between the experimental variables for predicting the mechanical properties within ±15% and ±18% of the experimental test results for flexural strength and elastic modulus, respectively. Based on the findings of this research, contour plots were developed to provide practical guidelines for future engineers to design CNT-cement nanocomposites.

Autosomal recessive spondylo-epi-metaphyseal dysplasia (Irapa type) in a Mexican family: delineation of the syndrome.

Forecasting the strength of micro/nano silica in cementitious matrix by machine learning approaches

Nanoindentation Characteristics of Cementitious Materials Containing Lithium Slag

Investigating the effectiveness of carbon nanotubes for the compressive strength of concrete using AI-aided tools

In-Depth Analysis of Cement-Based Material Incorporating Metakaolin Using Individual and Ensemble Machine Learning Approaches

Machine learning assisted prediction of the mechanical properties of carbon nanotube‐incorporated concrete

A novel approach in forecasting compressive strength of concrete with carbon nanotubes as nanomaterials

Machine learning applied to predicting phase assemblages of hardened cementitious systems

Indirect prediction of graphene nanoplatelets-reinforced cementitious composites compressive strength by using machine learning approaches

Atomistic simulation and machine learning predictions of mechanical response in nanotube-polymer composites considering filler morphology and aggregation

Prediction of the R3 Test-Based Reactivity of Supplementary Cementitious Materials: A Machine Learning Approach Utilizing Physical and Chemical Properties

Prediction of Carbon Nanostructure Mechanical Properties and Role of Defects Using Machine Learning

Development of a Machine Learning (ML)-Based Computational Model to Estimate the Engineering Properties of Portland Cement Concrete (PCC)

Machine Learning Driven Fluidity and Rheological Properties Prediction of Fresh Cement-Based Materials

The remarkable potential of machine learning algorithms in estimating water permeability of concrete incorporating nano natural pozzolana

Nanoindentation-based study of the micro-mechanical properties, structure, and hydration degree of slag-blended cementitious materials

Design and predicting performance of carbon nanotube reinforced cementitious materials : mechanical properties and dispersion characteristics.

Machine Learning Captures Synthetic Intuitions for Hollow Nanostructures

Strength Estimation and Feature Interaction of Carbon Nanotubes-Modified Concrete Using Artificial Intelligence-Based Boosting Ensembles

Probabilistic Deep Learning Prediction of Natural Carbonation of Low-Carbon Concrete Incorporating SCMs

Microscopic phase identification of cement-stabilized clay by nanoindentation and statistical analytics