Preparation and biological evaluation of active metabolites of vitamin D31.

M. Holick,H. DeLuca

Methods in Enzymology

Abstract:

What problem does this paper attempt to address?

Feasibility of location tracking of construction resources using UWB for better productivity and safety

S. Rodriguez,C. Zhang,A. Hammad

2010-01-01

Abstract:There is a growing demand for accurate and up-to-date information in the construction industry. Ultra Wideband (UWB) Real-Time Location Systems (RTLSs) enable tracking and visualization of resources on site and give more awareness to the construction staff in real time. This research investigates how UWB technology can improve productivity and safety in construction projects. The requirements of the RTLS are identified in terms of safety and productivity management. The usability of RTLS in the construction industry is tested by the collection of data from a construction site and organizing them into useful information needed for management. It was found that UWB is an effective tool to monitor construction resources because it provides accurate information in real time. However, good understanding of the requirements and filtering the data are necessary in order to get the best benefit of the technology for productivity and safety purposes.
Technical Feasibility Analysis on Applying Ultra-Wide Band Technology in Construction Progress Monitoring

Cheng Zhang,Weijie Shen,Zehao Ye

DOI: https://doi.org/10.1080/15623599.2020.1834928

2020-01-01

Abstract:The Architecture, Engineering & Construction (AEC) industry has increasing demand for a more efficient and effective construction progress monitoring approach, to replace the time-consuming, error-prone and labor-intensive manual approach. Indoor positioning technology has been considered a suitable choice to meet this demand by its adaptability to the harsh and dynamic environment of the construction site. With the continuous progress of construction, the site environment is also constantly changing, Real Time Location System (RTLS) based on indoor positioning technology has a promising potential by its cost-effective advantages under this situation. In this research, Ultra-wide band (UWB) technology was adopted to develop a construction progress monitoring approach due to its stronger anti-interference ability, shorter delay and higher positioning accuracy among indoor positioning technologies. To investigate the technical feasibility of applying UWB to collect raw location data of core workforce, equipment and materials involved in different construction activities, construction activities were divided into three categories based on the characteristics of UWB technology. On and off-construction site tests were conducted to evaluate the technical feasibility in five criteria. The results of all tests proved the proposed approach has certain implementation value and under the premise of appropriate design and setting of infrastructures.
Ultrawideband for Automated Real-Time Three-Dimensional Location Sensing for Workforce, Equipment, and Material Positioning and Tracking

Jochen Teizer,Manu Venugopal,Anupreet Walia

DOI: https://doi.org/10.3141/2081-06

2008-01-01

Abstract:Management of construction resources, such as workforce, equipment, and material, is critical to project success. Completion of work tasks on schedule, safely and within the proposed budget requires a coordinated planning effort that allocates adequate availability of project resources. Because this task alone can become a challenging and time-consuming effort for many field personnel, several existing technologies are reviewed for their benefits and limitations in keeping oversight of resource location and status at job sites. To ensure the optimal solution using the right resources, such knowledge becomes even more meaningful when optimizing construction logistics and safety at the same time. This paper introduces an emerging sensing technology called ultrawideband (UWB) that is capable of determining three-dimensional resource location information in object-cluttered construction environments in real time (up to 60 Hz). The use of UWB is explained in a variety of construction applications including simplifying on-site management, improving resource productivity and usage, reducing schedule and cost, and increasing work zone safety. UWB technology and its advantages and limitations are compared with the state of the art in positioning technologies. Results of preliminary UWB experiments in the laboratory and construction environment are presented using developed data processing algorithms and a method to determine the accuracy of UWB position measurements. The paper discusses the feasibility of using ultrawideband as a data collection and decision support tool for robotic (automated) infrastructure construction applications in the areas of real-time three-dimensional material flow and workforce location tracking, optimized machine positioning and automated navigation, and proactive work zone safety.
Advancements in Industrial RTLSs: A Technical Review of UWB Localization Devices Emphasizing Antennas for Enhanced Accuracy and Range

Amina Benouakta,Fabien Ferrero,Leonardo Lizzi,Robert Staraj

DOI: https://doi.org/10.3390/electronics13040751

IF: 2.9

2024-02-14

Electronics

Abstract:Over the past few years, the Internet of Things paradigm has brought renewed significant interest to indoor positioning, tracking, and localization topics, principally since real-time locating technology allows a reference node to infer the position of tagged target nodes, creating the opportunity for millions of object-to-object awareness applications. This study first presents an overview of positioning localization techniques and discusses the use of ultra-wide bandwidth technology for complex environment monitoring, followed by consideration of the error sources that are present in line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios between a reader and a tag. A technical review of the available industrial and commercial UWB real-time locating transceivers (RTLSs) is presented, with a focus on the frontend antennas that are integrated in these systems to establish the needed wireless communication for positioning. Then, the different characteristics of these antennas are summarized and discussed, along with their impact on the localization performance in terms of the reading range, position information accuracy, object-orientation-independent localization, and multipath mitigation. Solutions are suggested to achieve antenna-based improvements to the performance of RTLSs.

engineering, electrical & electronic,computer science, information systems,physics, applied
Passive Human Sensing Based on UWB CIR

Yan Gao,Hongbo Xu,Chao Li,Yong Wang,Zhiguo Shi

DOI: https://doi.org/10.1109/iccc62479.2024.10681796

2024-01-01

Abstract:This paper explores the utilization of UltraWideband (UWB) Channel Impulse Response (CIR) as a passive sensing technique for detecting changes in the environment and monitoring the locations of humans. CIR signals capture multipath data during electromagnetic wave propagation, enabling the identification of objects and activities in a given space. The primary advancement is the implementation of a Multi-Temporal Spatial Model (MTSM) for human localization, which improves precision and resilience by integrating multiple frames of CIR data over time and space. Unlike the standard Single-Temporal Spatial Model (STSM), MTSM considers the spatio-temporal continuity of localization tasks, leading to improved perception. Tests show that MTSM’s median error is only 39.04% of STSM’s, demonstrating a significant boost in accuracy. This approach is also more cost-effective and practical, as it can repurpose existing UWB hardware. By extending multi-frame CIR data and phase information, this technique offers a more precise and robust method for human sensing with a wide range of applications.
Untethered Ultra-Wideband-Based Real-Time Locating System for Road-Worker Safety

Aitor Ochoa-de-Eribe-Landaberea,Leticia Zamora-Cadenas,Igone Velez

DOI: https://doi.org/10.3390/s24082391

IF: 3.9

2024-04-09

Sensors

Abstract:In order to reduce the accident risk in road construction and maintenance, this paper proposes a novel solution for road-worker safety based on an untethered real-time locating system (RTLS). This system tracks the location of workers in real time using ultra-wideband (UWB) technology and indicates if they are in a predefined danger zone or not, where the predefined safe zone is delimited by safety cones. Unlike previous works that focus on road-worker safety by detecting vehicles that enter into the working zone, our proposal solves the problem of distracted workers leaving the safe zone. This paper presents a simple-to-deploy safety system. Our UWB anchors do not need any cables for powering, synchronisation, or data transfer. The anchors are placed inside safety cones, which are already available in construction sites. Finally, there is no need to manually measure the positions of anchors and introduce them to the system thanks to a novel self-positioning approach. Our proposal, apart from automatically estimating the anchors' positions, also defines the limits of safe and danger zones. These features notably reduce the deployment time of the proposed safety system. Moreover, measurements show that all the proposed simplifications are obtained with an accuracy of 97%.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Crane Pose Estimation Using UWB Real-Time Location System.

Cheng Zhang,Amin Hammad,S. Rodriguez

DOI: https://doi.org/10.1061/(ASCE)CP.1943-5487.0000172

2012-01-01

Abstract:AbstractOperating a crane is a complex job, which requires not only the experience of the operator, but also sufficient and appropriate real-time support to conceive and react to the environment. To help the crane operator, crane pose estimation is necessary to predict potential collisions. Environment perception technologies are essential to update environment information. Location data of the components of the cranes should be used to calculate the pose of the crane that can be used for collision avoidance. This paper aims to investigate how to collect and efficiently process the location data in near real time using ultra wideband (UWB) technology for providing intelligent support to crane operators. First, the requirements of using UWB technology in construction sites to track crane movements are defined. Then, the details of the UWB system setting method are investigated to decide the location of sensors and the number and location of tags attached to different components of a crane. A location data ...
WiFi FTM and UWB Characterization for Localization in Construction Sites

Carlos S. Álvarez-Merino,Emil J. Khatib,Hao Qiang Luo-Chen,Joel Llanes Michel,Sebastián Casalderrey-Díaz,Jesus Alonso,Raquel Barco

DOI: https://doi.org/10.3390/s22145373

IF: 3.9

2022-07-20

Sensors

Abstract:A high-precision location is becoming a necessity in the future Industry 4.0 applications that will come up in the near future. However, the construction sector remains particularly obsolete in the adoption of Industry 4.0 applications. In this work, we study the accuracy and penetration capacity of two technologies that are expected to deal with future high-precision location services, such as ultra-wide band (UWB) and WiFi fine time measurement (FTM). For this, a measurement campaign has been performed in a construction environment, where UWB and WiFi-FTM setups have been deployed. The performance of UWB and WiFi-FTM have been compared with a prior set of indoors measurements. UWB seems to provide better ranging estimation in LOS conditions but it seems cancelled by reinforcement concrete for propagation and WiFi is able to take advantage of holes in the structure to provide location services. Moreover, the impact of fusion of location technologies has been assessed to measure the potential improvements in the construction scenario.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Fast Deployment of a UWB-Based IPS for Emergency Response Operations

Toni Adame,Julia Igual,Marisa Catalan

DOI: https://doi.org/10.3390/s23094193

2023-04-22

Abstract:A wide range of applications from multiple sectors already use ultra-wideband (UWB) technology to locate and track assets precisely. This is not the case, however, for first responder localization during emergency response (ER) operations, which are highly conditioned by procedural and environmental constraints. After analyzing these limitations and reviewing the current state-of-the-art solutions, this work presents a UWB-based indoor positioning system (IPS) that relies on the global navigation satellite system real-time kinematic (GNSS-RTK) technology to quickly, accurately, and safely deploy its required infrastructure on site. A set of tests conducted on a two-story building prove the suitability of such a system, providing an average accuracy of less than 1 meter for static targets and the ability to faithfully reproduce the path followed by a mobile target inside the building. The obtained results strengthen the presented approach and pave the way for more sophisticated UWB-based IPSs that would include unmanned aerial vehicles (UAVs) and/or mobile robots to speed up network deployment even more while offering additional ER services.
Data integration using deep learning and real-time locating system (RTLS) for automated construction progress monitoring and reporting

Dena Shamsollahi,Osama Moselhi,Khashayar Khorasani

DOI: https://doi.org/10.1016/j.autcon.2024.105778

IF: 10.3

2024-09-25

Automation in Construction

Abstract:The shift towards automated progress monitoring using new technologies for efficient delivery of construction projects has received significant attention. The application of vision-based techniques for object recognition and real-time locating system (RTLS) for object localization has been widely studied. However, a single technology cannot provide complete information needed to determine the status of tracked elements on a job site. This paper presents an integrated method for progress monitoring through recognition and localization of elements in construction sites. This method integrates data derived from a deep learning model and Ultra-wideband (UWB) system, and reports each element's ID, location, visual data and capture time. Such information is essential for project managers to assess progress on site. The method is validated in a mechanical room, a challenging environment for RTLS and object recognition models due to signal interferences and occlusions. The findings suggest further research on improving integrated methods for efficient progress reporting.

construction & building technology,engineering, civil
Monitoring workers on indoor construction sites using data fusion of real-time worker's location, body orientation, and productivity state

Mohammadali Khazen,Mazdak Nik-Bakht,Osama Moselhi

DOI: https://doi.org/10.1016/j.autcon.2024.105327

IF: 10.3

2024-02-22

Automation in Construction

Abstract:Systematic control of construction operations using a Real-Time Locating System (RTLS) is becoming common in providing support to the management of complex construction sites. This paper proposes a novel indoor construction site monitoring system to track workers' location, workspace, body orientation, and productivity state at the same time. The system works based on three modules: (I) workspace discovery; (ii) body orientation detection; and (iii) productivity state identification. The workspace discovery module integrates location data with the 4-Dimensional Building Information Model (BIM) of the job site. Then, the body orientation detection module identifies workers' field of view onsite using Received Signal Strength Indicator (RSSI) values between Bluetooth Low Energy (BLE) beacons. Last but not least, the productivity state identification module relies on an accelerometer sensor embedded in body-mounted beacons. The results of performed experiments in the laboratory show a mean error of less than 30° in detecting the worker's focus orientation for a period of eight minutes. For identifying direct work and support work states, the productivity state identification module yielded an average error of 14% and a maximum error of 20%.

construction & building technology,engineering, civil
Show Me the Way: Real-Time Tracking of Wireless Mobile Users with UWB-Enabled RIS

Kevin Weinberger,Simon Tewes,Aydin Sezgin

2024-05-14

Abstract:The integration of Reconfigurable Intelligent Surfaces (RIS) in 6G wireless networks offers unprecedented control over communication environments. However, identifying optimal configurations within practical constraints remains a significant challenge. This becomes especially pronounced, when the user is mobile and the configurations need to be deployed in real time. Leveraging Ultra-Wideband (UWB) as localization technique, we capture and analyze real-time movements of a user within the RIS-enabled indoor environment. Given this information about the system's geometry, a model-based optimization is utilized, which enables real-time beam steering of the RIS towards the user. However, practical limitations of UWB modules lead to fluctuating UWB estimates, causing the RIS beam to occasionally miss the tracked user. The methodologies proposed in this work aim to increase the compatibility between these two systems. To this end, we provide two key solutions: beam splitting for obtaining more robust RIS configurations and UWB estimation correction for reducing the variations in the UWB data. Through comprehensive theoretical and experimental evaluations in both stationary and mobile scenarios, the effectiveness of the proposed techniques is demonstrated. When combined, the proposed methods improve worst-case tracking performance by a significant 17.5dB compared to the conventional approach.

Signal Processing,Systems and Control
A 2.4-Ghz ISM RF and UWB Hybrid RFID Real-Time Locating System for Industrial Enterprise Internet of Things

Chuanying Zhai,Zhuo Zou,Qin Zhou,Jia Mao,Qiang Chen,Hannu Tenhunen,Lirong Zheng,Lida Xu

DOI: https://doi.org/10.1080/17517575.2016.1152401

2017-01-01

Enterprise Information Systems

Abstract:This paper presents a 2.4-GHz radio frequency RF and ultra-wide bandwidth UWB hybrid real-time locating system RTLS for industrial enterprise Internet of Things IoT. It employs asymmetric wireless link, that is, UWB radio is utilised for accurate positioning up to 10 cm in critical sites, whereas 2.4-GHz RF is used for tag control and coarse positioning in non-critical sites. The specified communication protocol and the adaptive tag synchronisation rate ensure reliable and deterministic access with a scalable system capacity and avoid unpredictable latency and additional energy consumption of retransmissions due to collisions. The tag, consisting of a commercial 2.4-GHz transceiver and a customised application-specific integrated circuit ASIC UWB transmitter Tx, is able to achieve up to 3 years’ battery life at 1600 tags per position update second with 1000 mAh battery in one cluster. The time difference of arrival TDoA–based positioning experiment at UWB radio is performed on the designed software-defined radio SDR platform.
Self-calibration and Collaborative Localization for UWB Positioning Systems

Matteo Ridolfi,Abdil Kaya,Rafael Berkvens,Maarten Weyn,Wout Joseph,Eli De Poorter

DOI: https://doi.org/10.1145/3448303

IF: 16.6

2022-05-31

ACM Computing Surveys

Abstract:Ultra-Wideband (UWB) is a Radio Frequency technology that is currently used for accurate indoor localization. However, the cost of deploying such a system is large, mainly due to the need for manually measuring the exact location of the installed infrastructure devices (“anchor nodes”). Self-calibration of UWB reduces deployment costs, because it allows for automatic updating of the coordinates of fixed nodes when they are installed or moved. Additionally, installation costs can also be reduced by using collaborative localization approaches where mobile nodes act as anchors. This article surveys the most significant research that has been done on self-calibration and collaborative localization. First, we find that often these terms are improperly used, leading to confusion for the readers. Furthermore, we find that in most of the cases, UWB-specific characteristics are not exploited, so crucial opportunities to improve performance are lost. Our classification and analysis provide the basis for further research on self-calibration and collaborative localization in the deployment of UWB indoor localization systems. Finally, we identify several research tracks that are open for investigation and can lead to better performance, e.g., machine learning and optimized physical settings.

computer science, theory & methods
Precise Indoor Positioning Using UWB: A Review of Methods, Algorithms and Implementations

Fazeelat Mazhar,Muhammad Gufran Khan,Benny Sällberg

DOI: https://doi.org/10.1007/s11277-017-4734-x

IF: 2.017

2017-08-05

Wireless Personal Communications

Abstract:The demand and growth of indoor positioning has increased rapidly in the past few years for a diverse range of applications. Various innovative techniques and technologies have been introduced but precise and reliable indoor positioning still remains a challenging task due to dependence on a large number of factors and limitations of the technologies. Positioning technologies based on radio frequency (RF) have many advantages over the technologies utilizing ultrasonic, optical and infrared devices. Both narrowband and wideband RF systems have been implemented for short range indoor positioning/real-time locating systems. Ultra wideband (UWB) technology has emerged as a viable candidate for precise indoor positioning due its unique characteristics. This article presents a comparison of UWB and narrowband RF technologies in terms of modulation, throughput, transmission time, energy efficiency, multipath resolving capability and interference. Secondly, methods for measurement of the positioning parameters are discussed based on a generalized measurement model and, in addition, widely used position estimation algorithms are surveyed. Finally, the article provides practical UWB positioning systems and state-of-the-art implementations. We believe that the review presented in this article provides a structured overview and comparison of the positioning methods, algorithms and implementations in the field of precise UWB indoor positioning, and will be helpful for practitioners as well as for researchers to keep abreast of the recent developments in the field.

telecommunications
Precision Positioning for Smart Logistics using Ultra-Wideband Technology-Based Indoor Navigation: a Review

Mahmoud Elsanhoury,Petteri Mäkelä,Janne Koljonen,Petri Välisuo,Ahm Shamsuzzoha,Timo Mantere,Mohammed Elmusrati,Heidi Kuusniemi,Petteri Makela,Petri Valisuo

DOI: https://doi.org/10.1109/access.2022.3169267

IF: 3.9

2022-01-01

IEEE Access

Abstract:Logistics is an important driver for the competitiveness of industries and material supply. The development of smart logistics, powered by precise positioning and communication technologies can significantly improve the efficiency of logistics. The emerging technology of ultra-wideband (UWB) precision positioning has attracted significant attention throughout the previous decade owing to its promising capabilities over other radio frequency-based indoor localisation systems. In addition, UWB is characterised by large bandwidth and data rate, short message length, low transmission power and high penetration capability, which are all favourable for indoor positioning applications. However, UWB localisation technology faces several challenges that are somewhat similar to other technologies, such as mitigating errors that originate from non-line-of-sight (NLOS) situations and tackling signal interference in dense environments, and when required to operate in extreme conditions. This paper reviews the most recent advances made in UWB positioning systems over the last five years, with a focus on high-ranking articles. In addition to going through more conventional solutions to UWB challenges, modern solutions, which involve the use of machine learning and sensor data fusion, are discussed. We highlight the most promising findings of the recently implemented and foreseen UWB positioning systems by providing a summary of each reviewed article. Additionally, we address a major challenge that faces the UWB positioning technology: NLOS situations, focusing on some proposed remedies such as multi-sensor fusion and machine learning. As an application, this study introduces how UWB technology promotes smart logistics by offering indoor positioning to improve efficiencies in the delivery of goods from the source to the customer. Furthermore, it demonstrates the benefits of UWB technology for accurate positioning and tracking of both stationary and moving items, and machinery in a- indoor logistics environment.

computer science, information systems,telecommunications,engineering, electrical & electronic
Research on emergency protection system for personnel safety in cable tunnels based on ultra-wideband

Jiong Zhao,Junbing Zhang,Hao Li,Guoqiang Lei,Gang Wang

DOI: https://doi.org/10.1063/5.0222134

IF: 1.697

2024-08-01

AIP Advances

Abstract:This study comprehensively explores the application of ultra-wideband (UWB) technology in enhancing the safety and emergency protection of cable tunnel personnel. With the increase in electricity demand, traditional operation and maintenance methods of power grid cable tunnels are facing challenges, and there is an urgent need for more efficient and intelligent management methods. This article provides a detailed introduction to the principle, advantages, and application prospects of UWB positioning technology in cable tunnels, emphasizing its important role in high-precision positioning. UWB technology exhibits centimeter level precise positioning capability by emitting nanosecond narrow pulse signals and utilizing multipath propagation phenomena for ranging and positioning. This technology has multiple ranging methods, including one-way and two-way ranging based on time of arrival, as well as methods based on time difference. Each method has its own advantages and disadvantages, and it is suitable for different application scenarios. For example, one-way ranging is simple and direct but requires strict clock synchronization, while two-way ranging does not require high clock synchronization and has fewer communication times and low power consumption. In addition, this article also proposes an adaptive extended Kalman filtering algorithm for correcting ranging errors in non-line of sight environments, which significantly improves the stability and accuracy of the system in occluded environments. Through experimental verification, the algorithm effectively reduces the average error, further confirming the feasibility and effectiveness of UWB positioning technology in cable tunnel management. UWB technology has shown great potential in improving the safety of cable tunnels, providing an innovative solution for the construction and management of smart grids.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
An Automated Real-Time Localization System in Highway and Tunnel Using UWB DL-TDoA Technology

Long Wen,Jinkun Han,Liangliang Song,Qi Zhang,Kai Li,Zhi Li,Weimin Zhang,Beihai Zhang,Xin You,Yunsick Sung,Sumi Ji,Wei Song

DOI: https://doi.org/10.1155/2020/8877654

2020-11-22

Wireless Communications and Mobile Computing

Abstract:There exists an electromagnetic shielding effect on radio signals in a tunnel, which results in no satellite positioning signal in the tunnel scenario. Moreover, because vehicles always drive at a high speed on the highway, the real-time localization system (RTLS) has a bottleneck in a highway scenario. Thus, the navigation and positioning service in tunnel and highway is an important technology difficulty in the construction of a smart transportation system. In this paper, a new technology combined downlink time difference of arrival (DL-TDoA) is proposed to realize precise and automated RTLS in tunnel and highway scenarios. The DL-TDoA inherits ultra-wideband (UWB) technology to measure the time difference of radio signal propagation between the location tag and four different location base stations, to obtain the distance differences between the location tag and four groups of location base stations. The proposed solution achieves a higher positioning efficiency and positioning capacity to achieve dynamic RTLS. The DL-TDoA technology based on UWB has several advantages in precise positioning and navigation, such as positioning accuracy, security, anti-interference, and power consumption. In the final experiments on both static and dynamic tests, DL-TDoA represents high accuracy and the mean errors of 11.96 cm, 37.11 cm, 50.06 cm, and 87.03 cm in the scenarios of static tests and 30 km/h, 60 km/h, and 80 km/h in dynamic tests, respectively, which satisfy the requirements of RTLS.

computer science, information systems,telecommunications,engineering, electrical & electronic
Design and Implementation of Real-Time Localization System (RTLS) Based on UWB and TDoA Algorithm

Fengyun Zhang,Li Yang,Yuhuan Liu,Yulong Ding,Shuang-Hua Yang,Hao Li

DOI: https://doi.org/10.3390/s22124353

IF: 3.9

2022-06-08

Sensors

Abstract:Nowadays, accurate localization plays an essential role in many fields, such as target tracking and path planning. The challenges of indoor localization include inadequate localization accuracy, unreasonable anchor deployment in complex scenarios, lack of stability, and the high cost. So, the universal positioning technologies cannot meet the real application requirements scarcely. To overcome these shortcomings, a comprehensive ultra wide-band (UWB)-based real-time localization system (RTLS) is presented in this paper. We introduce the architecture of a real-time localization system, then propose a new wireless clock synchronization (WCS) scheme, and finally discuss the time difference of arrival (TDoA) algorithm. We define the time-base selection strategy for the TDoA algorithm, and we analyze the relationship between anchor deployment and positioning accuracy. The extended Kalman filter (EKF) method is presented for non-linear dynamic localization estimation, and it performs well in terms of stability and accuracy on moving targets.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

Preparation and biological evaluation of active metabolites of vitamin D31.

Feasibility of location tracking of construction resources using UWB for better productivity and safety

Technical Feasibility Analysis on Applying Ultra-Wide Band Technology in Construction Progress Monitoring

Ultrawideband for Automated Real-Time Three-Dimensional Location Sensing for Workforce, Equipment, and Material Positioning and Tracking

Advancements in Industrial RTLSs: A Technical Review of UWB Localization Devices Emphasizing Antennas for Enhanced Accuracy and Range

Passive Human Sensing Based on UWB CIR

Untethered Ultra-Wideband-Based Real-Time Locating System for Road-Worker Safety

Crane Pose Estimation Using UWB Real-Time Location System.

WiFi FTM and UWB Characterization for Localization in Construction Sites

Fast Deployment of a UWB-Based IPS for Emergency Response Operations

Data integration using deep learning and real-time locating system (RTLS) for automated construction progress monitoring and reporting

Monitoring workers on indoor construction sites using data fusion of real-time worker's location, body orientation, and productivity state

Show Me the Way: Real-Time Tracking of Wireless Mobile Users with UWB-Enabled RIS

A 2.4-Ghz ISM RF and UWB Hybrid RFID Real-Time Locating System for Industrial Enterprise Internet of Things

Self-calibration and Collaborative Localization for UWB Positioning Systems

Precise Indoor Positioning Using UWB: A Review of Methods, Algorithms and Implementations

Precision Positioning for Smart Logistics using Ultra-Wideband Technology-Based Indoor Navigation: a Review

Research on emergency protection system for personnel safety in cable tunnels based on ultra-wideband

An Automated Real-Time Localization System in Highway and Tunnel Using UWB DL-TDoA Technology

Design and Implementation of Real-Time Localization System (RTLS) Based on UWB and TDoA Algorithm