Abstract:This paper presents a flexure-based displacement reduction mechanism driven by a voice coil motor to improve the motion resolution and eliminate the hysteresis nonlinearity of the traditional piezo-actuated micropositioning/nanopositioning stages. The mechanism is composed of three groups of compound bridge-type displacement reduction mechanisms, which adopt distributed-compliance rectangular beams to reduce the concentration of stress and improve the dynamic performance of the mechanism. The symmetrical distribution of the structure can eliminate the parasitic displacement of the mechanism and avoid the bending moment and lateral stress applied to the voice coil motor. Firstly, the analytical model of the mechanism is obtained by the stiffness matrix method. The theoretical displacement reduction ratio, input stiffness, and natural frequency of the displacement reduction mechanism are obtained by solving the analytical model. Then, through the static analysis and modal analysis of the mechanism with the Ansys software, the accuracy of the analytical model is verified, and the experimental prototype is also constructed for performance tests. The results show that the maximum stroke of the mechanism is 197.43 μm with motion resolution of 40 nm. The natural frequency is 291 Hz, and the input stiffness is 28.50 N/mm. Finally, the trajectory tracking experiment is carried out to verify the positioning performance of the mechanism. The experimental results show that the designed feedback controller has good stability, and the introduction of the feedforward controller and disturbance observer can greatly reduce the tracking errors.

Direct Eye Diagram Optimization for Arbitrary Transmission Lines Using FIR Filter

Precision Servo Control of GMA Based on Compounding Feedforward Compensation

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Research on Multi-Parametric Coupling Design Method of Deformable Boring Bar in Embedded Giant Magnetostrictive Actuator

Research on Transient Multi-Field Coupling Model of GMM under Variable Pressure in Embedded GMA

Experimental Research on Output Performances of Giant Magnetostrictive Actuator

Simulation and Experimental Study of the Coupling Drive Magnetic Field for Embedded Giant Magnetostrictive Actuators

Study on design approach of giant magnetostrictive actuator

Study on Giant Magnetostrictive Microdisplacement Actuator Having the Function of Sensing Its Displacement

Research on Static Output Characteristics of GMM Actuator for Servo Valve

Motor-Driven Giant Magnetostrictive Actuator

Design, analysis and experiment of GMM-based nozzle-flapper servo valve

Design, Modeling, Testing, and Control of a Novel Fully Flexure-Based Displacement Reduction Mechanism Driven by Voice Coil Motor

Study on Giant Magnetostrictive Actuator Based on Disk-Shape Diaphragm Compliant Structure

Development of a deflector-jet electrohydraulic servovalve using a giant magnetostrictive material

A novel bridge-type compliant displacement amplification mechanism under compound loads based on the topology optimisation of flexure hinge and its application in micro-force sensing

Design and analysis of a piezo-actuated hydraulic micro-displacement amplifier with high bandwidth and large amplification ratio

Electro-mechanical transfer matrix modeling of piezoelectric actuators and application for elliptical flexure amplifiers

Theoretical Modeling of Attenuated Displacement Amplification for Multistage Compliant Mechanism and Its Application

Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve

Nonlinear Design, Analysis, and Testing of a Single-Stage Compliant Orthogonal Displacement Amplifier with a Single Input Force for Microgrippers