Abstract:The recent surge of interest in ytterbium-based lasers is focused on high-power diode-pumped all-solid-state laser sources. One of the advantages of the Yb3+ ion are the relatively broad absorption and emission bands. They are much smoother and display less structure in glass host materials than those of %:YAG, a promising feature for tunable operation and generation of ultrashort laser pulses. Efficient diode pumping of %:glass has already been demonstrated under continuous-wave conditions.'32 The first attempt to modelock the %:YAG laser by a passive method (A-FPSA) resulted in 540-fs-long pulses at 1.03 I J . ~ . ~ Here we demonstrate cw passive modelocking of an %:glass laser for the first time to our knowledge, based entirely on the Kerr effect in the active medium in a resonator with dispersion compensation. The glass sample used was doped with 6 X 10' cm-3 Yb3+ and exhibits a fluorescence lifetime of 1.2 ms. In our experiments a cw Tksapphire laser acts as the pump source. The output of the pump laser (3 W at 940 nm) was focused into the 4-mm-thick %:glass sample by a 60 mm lens. The active material was positioned at the Brewster angle between two folding mirrors in a standard astigmatically compensated type-Z laser configuration (Fig. 1). The cavity could be operated as a free-running cw laser by use of M, (Fig. 1) yielding >350 mW ofoutput power near 1035 nm at 1.2 W of absorbed pump radiation with a threshold of -150 mW. Essential for the achievement of pure passive modelocking was the minimization of all losses at the maximum pump power available. After optimization in the cw free-running regime modelocked operation was achieved then by precise adjustment of the two prisms, the %:glass sample and the 3-mm-wide vertical slit employed as an aperture near the output coupler Mi. Starting of the laser was accomplished through slow translation of one of the

Plasmonics-enhanced photoconductive terahertz detector pumped by Ytterbium-doped fiber laser

High-Sensitivity Plasmonic Photoconductive Terahertz Detector Driven by a Femtosecond Ytterbium-Doped Fiber Laser

High Dynamic Range and Broadband Photoconductive Terahertz Detector Driven by a Ytterbium-Doped Femtosecond Fiber Laser

Hybrid Photon-Plasmon Nanowire Lasers

High Power Telecommunication-Compatible Photoconductive Terahertz Emitters Based on Plasmonic Nano-Antenna Arrays

Plasmon-Enhanced below Bandgap Photoconductive Terahertz Generation and Detection

Design and Fabrication of Plasmonic Tuned THz Detectors by Periodic Hole Structures

Plasmonic photoconductive terahertz focal-plane array with pixel super-resolution

Significant Radiation Enhancement in Photoconductive Terahertz Emitters by Incorporating Plasmonic Contact Electrodes

Photoconductive receivers at 1030 nm for high average power pulsed THz detection

Plasmonic Architectures Boosting Performance in Terahertz Photodetectors

Performance of Photoconductive Receivers at 1030 nm Excited by High Average Power THz Pulses

Resonant Terahertz Detection Using Graphene Plasmons

Coherent Terahertz Detection: Free Space Electro-Optic Sampling Versus Antenna Detection

Efficient photoconductive terahertz detector with all-dielectric optical metasurface

Performance Enhancement of Photoconductive Antenna Using Saw-Toothed Plasmonic Contact Electrodes

Monolithic Multi-parameter Terahertz Nano-micro Detector Based on Plasmon Polariton Atomic Cavity

High Power Terahertz Generation Using 1550nm Plasmonic Photomixers

High-power two-color plasma-based THz generation driven by a Tm-doped fiber laser

Time-Resolved Detection of Terahertz Response in Photodynamically Induced Plasmonic Metasurfaces