Abstract:Sodium-ion batteries made of earth-abundant elements could potentially become affordable, scalable, and sustainable energy storage solutions. Among different sodium-ion positive electrode chemistries, layered transition metal oxides are of special interest due to their promising energy densities. Specific energy densities close to LiFePO 4 -based lithium-ion batteries have been demonstrated. [1] Promising capacity retention has been demonstrated as well, with >4,000 cycles to 80% at 30°C. [1] However, the poor air-stability of layered sodium-ion positive electrode materials poses challenges in materials storage and processing in both laboratory and industry scales. Moreover, sodium layered oxides can go through complex phase transitions during electrochemical sodium intercalation, which can result in poor capacity retention unless mitigated by effective materials design. Other challenges are gas generation, impedance growth and sodium plating during cycling, which must all be addressed to make viable layered oxide-based sodium-ion batteries for large-scale storage of renewable energy from wind and solar. In this contribution, we first explore compositional modification as an approach to mitigate structural degradation in sodium layered oxides during air exposure and sodium intercalation. A combination of substituent elements is utilized to dramatically improve air stability as evidenced by X-ray diffraction (XRD) and scanning electron microscopy (SEM) experiments. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDS) are employed to understand the underlying mechanism that leads to improved air stability. Furthermore, coin cell results suggest that compositional modification enhances the capacity retention without sacrificing reversible capacity. [2] Secondly, we explore the performance of layered oxide positive electrodes in machine-made 250 mAh pouch cells with hard carbon negative electrodes. The capacity retention and impedance growth are studied in 40°C cycling tests with various electrolyte additives. High cycling stability with >99% capacity retention after 200 cycles can be attained with simple electrolyte additives. However, specialized additives need to be selected to suppress gas generation and impedance growth. Symmetric cell impedance spectroscopy is used to reveal whether impedance growth stems from the positive or negative electrode. [3] Gas generation is assessed by in-situ volume measurements using the Archimedes principle. [4] Interestingly, sodium-ion cells show distinct differences to lithium-ion batteries in terms of their gas generation during the formation cycle. Moreover, sodium plating can have a surprising effect on the gas generation during charge/discharge cycling. Using ultra-high precision coulometry, the critical conditions for sodium plating and its effect on cell performance are determined. In-situ volume measurements reveal a surprising mechanism that explains the interesting relationship between gas generation and cell voltage in sodium-ion batteries. [5] References [1] J. Barker, 242 nd ECS Meeting, Atlanta (2022). [2] L. Zhang et al., manuscript in preparation. [3] H. Hijazi, Z. Ye, et al., manuscript in preparation. [4] C. Aiken et al., J. Electrochem. Soc. 161, A1548–A1554 (2014). [5] E. Alter et al., manuscript in preparation. Figure 1. Discharge capacity (a), discharge capacity normalized to cycle 5 (b), and voltage polarization vs cycle number (c) for Na-ion pouch cells cycling at C/5 and 40°C with various electrolyte additives in 1M NaPF 6 EC:DEC (1:1 w/w). Figure 1

Stable High-Temperature Cycling of Na Metal Batteries on Na3V2(PO4)3 and Na2FeP2O7 Cathodes in NaFSI-Rich Organic Ionic Plastic Crystal Electrolytes

A New Electrolyte Formulation for Securing High Temperature Cycling and Storage Performances of Na‐Ion Batteries

Stable Sodium Metal Batteries via Manipulation of Electrolyte Solvation Structure

Electronic structure regulation of Na2FePO4F cathode toward superior high-rate and high-temperature sodium-ion batteries

Highly Stable Sodium Metal Batteries Enabled by Manipulating the Fluorinated Organic Components of Solid‐Electrolyte‐Interphase

Construction of Inorganic/Organic Hybrid Layer for Stable Na Metal Anode Operated under Wide Temperatures

Highly Fluorinated and Boron Containing Anion Derived Stable Anode and Cathode Interfaces for Long Cycle and High Voltage Sodium Metal Batteries

Liquid Electrolyte Immobilized in Compact Polymer Matrix for Stable Sodium Metal Anodes

Electrolyte Engineering with Tamed Electrode Interphases for High-Voltage Sodium-Ion Batteries

High-Performance Cycling of Na Metal Anodes in Phosphonium and Pyrrolidinium Fluoro(sulfonyl)imide Based Ionic Liquid Electrolytes

Robust NASICON-type iron-based Na4Fe3(PO4)2(P2O7) cathode for high temperature sodium-ion batteries

Unlocking Fast and Highly Reversible Sodium Storage in Fe-Based Mixed Polyanion Cathodes for Low-Cost and High-Performance Sodium-Ion Batteries

Highly Performing Sodium Metal Batteries Reinforced by a Self-Regulated Dual-Layered Solid Electrolyte Interphase via a Metal-Organic Framework

Quantitative Analysis of Sodium Metal Deposition and Interphase in Na Metal Batteries

Stable Cycling of Na Metal Batteries at Ultrahigh Capacity

Cross-linked beta alumina nanowires with compact gel polymer electrolyte coating for ultra-stable sodium metal battery

Ostwald Ripening Tailoring Hierarchically Porous Na3 V2 (PO4 )2 O2 F Hollow Nanospheres for Superior High-Rate and Ultrastable Sodium Ion Storage.

A Quasi‐Solid‐State Polyether Electrolyte for Low‐Temperature Sodium Metal Batteries

Sodium‐Difluoro(oxalato)Borate‐Based Electrolytes for Long‐Term Cycle Life and Enhanced Low‐Temperature Sodium‐Ion Batteries

Approaches to Control Air Stability, Capacity Retention, Gas Generation, and Impedance Growth of Layered Oxide Positive Electrode Materials for Sodium-Ion Batteries

Fluorinated Carbonate Electrolyte with Superior Oxidative Stability Enables Long‐Term Cycle Stability of Na2/3Ni1/3Mn2/3O2 Cathodes in Sodium‐Ion Batteries