ZnT8107-115/HLA-A2 dimers attenuate the severity of diabetes by inducing CD8+ T cell tolerance.

Min F Zhang,Zhong-Qi Zhou,Jinguang Wang,Shu-fa Li

DOI: https://doi.org/10.1016/j.imlet.2016.11.002

IF: 4.23

2016-12-01

Immunology Letters

Abstract:

What problem does this paper attempt to address?

Integrated Fenton-like and photocatalytic system for metronidazole degradation in water using FeNi3/SiO2/CuS magnetic nanocomposite

Negin Nasseh,Abolfazl Karimi Pour,Moslem Azqandi,Waleed M.S Kassim,Behnam Barikbin,Tariq J. Al-Musawi

DOI: https://doi.org/10.5004/dwt.2023.29780

IF: 1.1

2023-01-01

Desalination and Water Treatment

Abstract:In the present study, the adsorption mechanism and capacity of FeNi3/SiO2/CuS magnetic nanocomposite, as a catalyst, for metronidazole (MTZ) antibiotic degradation were investigated. The degradation reaction was performed using an integrated treatment system comprised of Fenton-like and UV-photocatalytic processes. Various material analyses such as field-emission scanning electron microscope, Fourier-transform infrared spectroscopy, transmission electron microscopy, energy-dispersive X-ray analysis, X-ray diffraction, and vibrating-sample magnetometer were employed to prove the successful synthesis of the used catalyst and to gather information about its surface and structural properties. The characterization results showed that the nanocomposite used in this study was superparamagnetic (20 emu/g) and its crystal size was 26 and its particle size was about 64 nm. In addition, the effects of pH 3, 5, 7, 9, and 11, catalyst dosage FeNi3/SiO2/CuS 0.005–0.1 g/L, initial metronidazole concentration 10–30 mg/L, contact time 5–200 min, and hydrogen peroxide content 50–200 mg/L, were studied. The FeNi3/SiO2/CuS in the proposed treatment system was operated with MTZ degradation efficiency reach to 100% during the first 60 min of the degradation process. After the sixth cycle of regeneration processes, the FeNi3/SiO2/CuS lost only 5% of its degradation ability (from 100% to 96.83%). The degradation efficiency of the chemical oxygen demand (COD) parameter was tested which is remarkably enhanced to ~74% during degradation time of 200 min. Also, the analysis of COD on real wastewater at this time showed a reduction of about 65.8% during this process under optimal reaction conditions. The adsorption followed a pseudo-first-order kinetic equation (R 2 ≥ 0.9). Taking the results of this study, the FeNi3/SiO2/CuS shows a potential application as a catalyst for MTZ degradation using photocatalytic combined with a Fenton-like treatment system.

engineering, chemical,water resources
Synthesis of Ag/CuS doped mineral magnetite nanocomposite with improved photocatalytic activity against tetracycline and diclofenac pollutants

Roya Mohammadzadeh Kakhki,Hadis Bolandhemmat

DOI: https://doi.org/10.1038/s41598-024-69644-5

IF: 4.6

2024-08-18

Scientific Reports

Abstract:The contamination of water sources by pharmaceutical pollutants presents significant environmental and health hazards, making the development of effective photocatalytic materials crucial for their removal. This research focuses on the synthesis of a novel Ag/CuS/Fe3O4 nanocomposite and its photocatalytic efficiency against tetracycline (TC) and diclofenac contaminants. The nanocomposite was created through a straightforward and scalable precipitation method, integrating silver nanoparticles (AgNPs) and copper sulfide (CuS) into a magnetite framework. Various analytical techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR),ultraviolet–visible spectrophotometry (UV–Vis) and energy-dispersive X-ray spectroscopy (EDS), were employed to characterize the structural and morphological properties of the synthesized material. The photocatalytic activity was tested by degrading tetracycline and diclofenac under visible light. Results indicated a marked improvement in the photocatalytic performance of the Ag/CuS/Fe3O4 nanocomposite (98%photodegradation of TC 60 ppm in 30 min) compared to both pure magnetite and CuS/Fe3O4. The enhanced photocatalytic efficiency is attributed to the synergistic interaction between AgNPs, CuS, and Fe 3 O 4 , which improves light absorption and charge separation, thereby increasing the generation of reactive oxygen species (ROS) and promoting the degradation of the pollutants. The rate constant k of photodegradation was about 0.1 min −1 for catalyst dosages 0.02 g. Also the effect of photocatalyst dose and concentration of TC and pH of solution was tested. The modified photocatalyst was also used for simultaneous photodegradation of TC and diclofenac successfully. This study highlights the potential of the Ag/CuS/Fe3O4 nanocomposite as an efficient and reusable photocatalyst for eliminating pharmaceutical pollutants from water.

multidisciplinary sciences
Magnetic induced construction of core-shell architecture Fe3O4@TiO2-Co nanocomposites for effective photocatalytic degradation of tetracycline

Qingmei Tan,Wensheng Zhang,Tianren Liu,Ying He,Yuangong Ma,Yingxin Yang,Dongxue Han,Dongdong Qin,Li Niu,Wen-Sheng Zhang

DOI: https://doi.org/10.1039/d3nj02080k

IF: 3.3

2023-07-28

New Journal of Chemistry

Abstract:Owing to the advantages of easy separation and recovery, the development of magnetic photocatalysts is essential to create a viable photocatalytic technology for the degradation of antibiotic contaminants in water. Herein, magnetic Fe3O4@TiO2-Co nanocomposites as a highly recyclable and effective photocatalyst with various Co loading percentages were successfully prepared via a facile route and evaluated for photodegradation of model tetracycline (TC) antibiotics. As a result, the optimal Fe3O4@TiO2-Co-2.7 sample possesses a removal rate of 92.4% for the TC degradation, which is 3.2 fold and 1.6 fold higher than single Fe3O4 (28.8%) and Fe3O4@TiO2 (58.7%), respectively. The enhanced photocatalytic activity is mainly attributed to the advantages of integrating magnetic Fe3O4 nanospheres and metal Co nanoparticles, resulting in the overall magnetic composites of Fe3O4@TiO2-Co having an ameliorative light collection ability, energy-saving recycling process, excellent photocatalytic activity, and high chemical and environmental stability. Satisfactorily, the Fe3O4@TiO2-Co photocatalyst could be easily recovered from the reaction solution by an applied magnetic field, and its photocatalytic activity is almost not loss after five cycles of repetitive use. Moreover, the intermediates in the degradation pathway were identified by high-performance liquid chromatography-mass spectrometer (HPLC-MS) as well as the TC degradation pathway in the photocatalytic reaction of the as-designed system was proposed. The present work was successfully applied for the purification of tetracycline antibiotics in water pollutants, demonstrating a promising prospect for application to other pollutant degradation systems.

chemistry, multidisciplinary
Enhanced solar light-driven photocatalysis of norfloxacin using Fe-doped TiO2: RSM optimization, DFT simulations, and toxicity study

Anjali Chauhan,Shekhar Agnihotri,Mondem Vasundhara

DOI: https://doi.org/10.1007/s11356-024-34080-5

IF: 5.8

2024-07-18

Environmental Science and Pollution Research

Abstract:This study investigates the photocatalytic degradation of norfloxacin (NFX) utilizing Fe-doped TiO 2 nanocomposite under natural sunlight. TiO 2 -based photocatalysts were synthesized using chemical precipitation varying Fe-dopant concentration and characterized in detail. Theoretical modelling, centred on density functional theory (DFT), elucidated that Fe ions within the TiO 2 lattice are effectively confined, thereby narrowing the wide band gap of TiO 2 . The findings strongly support that Fe 3+ ions augmented the photocatalytic activity of TiO 2 by facilitating an intermediate interfacial route for electron and hole transfer, particularly up to an optimal dopant concentration of 1.5 M%. Subsequently, a three-level Box–Behnken design (BBD) was developed to determine the initial pH, optimal catalyst concentration, and drug dosage. High-performance liquid chromatography-mass spectrometry (HPLC–MS) was employed to identify reaction intermediates, thereby establishing a potential degradation pathway. Notably, sustained recyclability was achieved, with 82% degradation efficiency maintained over five cycles. Additionally, the toxicity of degradation intermediates was evaluated through bacterial and phytotoxicity tests, affirming the environmental safety of treated water. In vitro toxicity of the nanomaterial was also examined, emphasizing its environmental implications. Scavenger experiments revealed that hole and hydroxyl radicals were the primary active species in Fe-TiO 2 -based photocatalysis. Furthermore, the antibacterial potential of the synthesized catalyst was assessed using Escherichia coli and Staphylococcus aureus to observe their respective antibacterial responses.

environmental sciences
Synthesis and characterization of magnetic iron sulfide (Fe-S)/CuS nano composite as a novel recyclable catalyst in photocatalyst removal of tetracycline from aqueous solutions

Haniyeh Rasouli Darmiyan,Rasoul Khosravi,Taher Shahryari

DOI: https://doi.org/10.5004/dwt.2022.28596

IF: 1.1

2022-01-01

Desalination and Water Treatment

Abstract:Drugs, especially antibiotics, as a group of emerging contaminants, pose a serious threat to the environment and aquatic ecosystems due to their adverse effects, cumulative properties, and developing drug resistancy. Therefore, this study aimed to evaluate the removal efficiency of tetracycline (TC) antibiotic from aqueous solutions using photocatalytic process in the presence of magnetic iron sulfide (Fe-S/CuS) nanoparticles on a laboratory scale. The magnetic nanocomposite was first characterized by transmission electron microscopy, X-ray diffractometer, vibration sampling magnetometer, Field-emission scanning electron microscopy, Fourier-transform infrared spectrometer, diffuse reflection spectroscopy, and energy-dispersive X-ray spectroscopy techniques. Factors, such as pH, reaction contact time, nanocomposite dose, and contaminant concentration on the removal efficiency were studied. All the experiments were performed at room temperature under UV-A light. The results of this study indicated that the highest removal efficiency of TC was obtained at optimum pH of 7. The results also showed that in the initial concentration of TC antibiotic (20 mg/L), the removal efficiency increased by increasing contact time and also by increasing the dose of the desired nanocomposite, the removal efficiency first increased and then decreased. Moreover, the synthesized nanocomposite had the ability to be reused with an 18% reduction in the removal efficiency in five consecutive cycles. Finally, the results of this study showed the acceptable efficiency of Fe-S/CuS nanocomposite in photocatalytic removal of TC antibiotic.

engineering, chemical,water resources
Photocatalytic Degradation of Tetracycline by ZnO/γ-Fe2O3 Paramagnetic Nanocomposite Material

Paola Semeraro,Simona Bettini,Shadi Sawalha,Sudipto Pal,Antonio Licciulli,Fabio Marzo,Nicola Lovergine,Ludovico Valli,Gabriele Giancane

DOI: https://doi.org/10.3390/nano10081458

IF: 5.3

2020-07-25

Nanomaterials

Abstract:In recent years, the presence of numerous xenobiotic substances, such as antibiotics, has been detected in water environments. They can be considered as environmental contaminants, even if their effect on human health has yet to be totally understood. Several approaches have been studied for the removal of these kinds of pollutants. Among these compounds, tetracycline (TC), a broad-spectrum antibiotic, is one of the most commonly found in water due to its widespread use. In the context of reducing the presence of TC in aqueous solution, in this contribution, a composite catalyst based on zinc oxide (ZnO) and iron oxide (γ-Fe2O3) was developed and its photocatalytic properties were investigated. The catalytic materials were synthesized by a microwave-assisted aqueous solution method and characterized by Field Emission Scanning Electron Microscope (FESEM), X-Ray Fluorescence (XRF) and Brunauer−Emmett−Teller (BET) analysis. The TC concentration was evaluated by spectrophotometer measurements at specific time intervals. The performed photocatalytic experiments clearly demonstrated that the ZnO/γ-Fe2O3 composite catalyst presents significant photocatalytic activity, indeed a TC degradation efficiency of 88.52% was registered after 150 min. The presence of iron oxide in the structure of the catalyst enhances both the surface area and the pore volume, facilitating the adsorption of the analyte on the surface of nanostructures, a fundamental phase to optimize a photodegradation process. Moreover, ZnO was found to play the key role in the photocatalytic process assisted by γ-Fe2O3 which enhanced the TC degradation efficiency by 20%.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Development and application of multifunctional Fe3O4/SiO2/TiO2/Cu nanocomposites for sustainable water treatment

Mohammad-Peyman Mazhari,Hossein Khojasteh,Nowjuan Sharifi,Peyman Aspoukeh,Seyed Mahdi Mousavi

DOI: https://doi.org/10.1007/s10971-024-06353-5

2024-03-04

Journal of Sol-Gel Science and Technology

Abstract:This investigation entailed the synthesis of Fe 3 O 4 /SiO 2 /TiO 2 via the sol-gel technique, and the Fe 3 O 4 /SiO 2 /TiO 2 /Cu nanocomposite utilizing Cu(NO 3 ) 2 .3H 2 O through the photodeposition approach. Subsequent to synthesis, these specimens underwent comprehensive characterization employing an array of analytical techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDS), vibrating sample magnetometry (VSM), Diffuse Reflectance Spectroscopy (DRS) and Fourier transform infrared (FT-IR) spectroscopy. The focal point of this study was the assessment of the catalytic proficiency of both Fe 3 O 4 /SiO 2 /TiO 2 and Fe 3 O 4 /SiO 2 /TiO 2 /Cu magnetically responsive nanocatalysts in facilitating the degradation of Reactive Methylene Blue (MB) under ultraviolet irradiation at ambient temperature. A notable attribute of these magnetic nanocomposites is their capacity for complete recovery, enabled by the application of an external magnetic field, thereby demonstrating significant potential for practical applications in environmental remediation.

materials science, ceramics
Facile construction of magnetic M-ZnO-Ni-RSA composite as a functional photocatalyst for tetracycline degradation: Performance and mechanism

Gui‐ling Gao,Pei‐jiang Zhou,Chao-qi Chen,Guiâ€گling Gao,Peiâ€گjiang Zhou

DOI: https://doi.org/10.1016/j.jphotochem.2023.115249

IF: 5.141

2023-11-08

Journal of Photochemistry and Photobiology A Chemistry

Abstract:Due to the acute contamination problem and the energy crisis, the development of high efficient, environmental-friendly, visible-light responsible photocatalyst has long been imperative to address the water pollution. Herein, we prepared a new type of magnetic catalyst (M-ZnO-Ni-RSA) via a facile combination of ultrasonic precipitation and solvothermal method. The as-prepered composite possessed high adsorption capacity, enhanced photocatalytic performance and outstanding resustability. The structural, morphological, and optical characteristics were detected by various methods, and the photocatalytic performance was systematically investigated. The results showed that the maximum removal efficiency of high initial concentration tetracycline TC (50آ mg/L) over M-ZnO-Ni-RSA was up to 98.7 % within 55آ min, which was faster than that of ZnO-Ni-RSA (âˆ1⁄494.07 % within 60آ min). Except for removal efficiency and adsorption capacity, other novel and more dependable evaluation metrics including ratio of maximum adsorption capacity to the surface area(eS BET) , ratio of moles of sorbents to moles in solution(q p ), ratio of digration rate to photon flux(QY), ratio of molecules per photon to catalyst mass(SY) and the merit of product to energy consumed(FOM) were introduced to holistically assess the performance of the catalyst for TC removal.The incorporation of oxides facilitated interactions, thus increasing the oxygen traps and enhancing the segregation of photoinduced carriers, which were beneficial to promote photochemical activity. Besides, the doped magnetic Fe 3 O 4 facilitated the easy separation and the potential of reusability. The EPR spin-trapping tests and radical substances quenching experiments highlighted the vital participation of 1 O 2 , O 2 â€“ and آ·OH in TC removal. The initial pH, light source, catalyst dosage on the removal of TC were investigated. As expected, the M-ZnO-Ni-RSA exhibited consistent stability after five runs of TC photodegradation. Above all, the possible photocatalytic mechanism was proposed. The showed that the downstream intermediates possessed no toxicity and mutagenicity through QSAR and T.E.S.T. results. This study basically proposed a facile strategy for synthesis of efficient and stable catalyst for TC removal, thus paving the way for a promising green remediation of actual wastewater.

chemistry, physical
Microwave-based preparation of γ-Fe2O3/SrTiO3 photocatalyst for efficient degradation of organic pollutants in water

Jinfen Niu,Yue Zhang,Jiahui Shi,Ziqi Zhang,Zhangtengfei Ma,Binghua Yao,Xiaojiao Yu,Xiaowei Wang

DOI: https://doi.org/10.1016/j.matchemphys.2022.126357

IF: 4.778

2022-09-01

Materials Chemistry and Physics

Abstract:Photocatalysis is considered one of the most promising wastewater treatment technologies. In this work, a magnetic photocatalytic γ-Fe2O3/SrTiO3 composite with high performance and stability were synthesized by a one-step microwave method, and the amount of γ-Fe2O3 on methylene blue (MB) and tetracycline (TC) degradation performance of composite photocatalyst was investigated under simulated sunlightand. The materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible diffuse reflectance spectra (UV–vis DRS) and electron spin resonance (ESR). The degradation of MB and TC over 0.3% γ-Fe2O3/SrTiO3 was found to be very effective, and the degradation reached 84.91% (150 min) and 92.03% (60 min), respectively. After five consecutive cycles of reusability test under visible light irradiation, the photocatalytic degradation efficiency remained unchanged. According to the results of free radicals capture experiments and ESR, superoxide radical and hole were found to be the main active species for MB degradation. The degradation products were identified by liquid chromatography triple quadrupole mass spectrometry (LC-MS), and a possible degradation pathway of TC was proposed. Thus, magnetic composites provide a new strategy for the design of photocatalysts with excellent catalytic performance, which is conducive to recovery.

materials science, multidisciplinary
Insight into photo-fenton catalytic degradation of tetracycline by environmental friendly nanocomposite 1T-2H hybrid phases MoS2/Fe3O4/g-C3N4

Rongchao Yang,Guangzhu Zhou,Cuizhen Wang,Yin Liu,Yanyun Zhao,Yinming Li,Xiaoning Fu,Jingyi Chi,Xi Chen,Hui Fang,Zheng Qin

DOI: https://doi.org/10.1016/j.jclepro.2022.135406

IF: 11.1

2023-01-01

Journal of Cleaner Production

Abstract:Photogenerated charge recombination is a bottleneck in the field of photocatalysis. Polycrystalline materials may be an actual way to solve this problem. In this study, a novel 1T-2H hybrid phases MoS2/Fe3O4/g-C3N4 nanocomposite (MFG) was synthesized to improve the photo-Fenton degradation under visible light on tetracycline whose emergence in water environment had attracted great public attention. We got an insight into the photo-Fenton catalytic effect on tetracycline via detailed investigation and discussion. MFG was synthesized by calcination, hydrothermal and coprecipitation. The successful synthesis of 1T-2H hybrid phases MoS2 (HP–MoS2), as a polycrystalline material, was proved by XRD and XPS. After HNO3 treatment, the grain size of bulk g-C3N4 decreased obviously, and the photocatalytic effect was also improved. It showed stable performance and significant photo-Fenton catalytic activity when H2O2 was at low concentration. Especially, the best degradation efficiency of tetracycline had been more than 80% at 0.003M H2O2 within 30min. HCO3 − had an obvious inhibition effect on the reaction compared with SO4 2−, Cl−, and NO3 −, and a reasonable explanation was proposed that HCO3 − reacts with •OH to form less reactive free radicals. Free radical quenching experiments and EPR proved that •OH and •O2 − were the dominant free radicals. The LC-MS was employed to identified the intermediate products of TC. The synergistic effect of HP-MoS2 and acid-treated g-C3N4(HCN) improved the transfer efficiency of photogenerated charges and promoted the reduction of Fe3+, which accelerated the photo-Fenton reaction. Moreover, the reusability of the composite was observed up to four cycles and showed good recycling performance during the degradation of tetracycline.

environmental sciences,green & sustainable science & technology,engineering, environmental
Investigating the Performance and Stability of Fe3O4/Bi2MoO6/g-C3N4 Magnetic Photocatalysts for the Photodegradation of Sulfonamide Antibiotics under Visible Light Irradiation

Ke Li,Miaomiao Chen,Lei Chen,Wencong Xue,Wenbo Pan,Yanchao Han

DOI: https://doi.org/10.3390/pr11061749

IF: 3.5

2023-06-08

Processes

Abstract:In this study, an Fe3O4/Bi2MoO6/g-C3N4 magnetic composite photocatalyst was synthesized for the visible-light-driven photocatalytic degradation of sulfonamide antibiotics, specifically sulfamerazine (SM1). Characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), UV-vis diffuse reflectance spectra (UV-vis), and the use of a vibrating sample magnetometer (VSM), were employed to analyze the fabricated samples. The composite exhibited efficient visible-light absorption and charge separation, with optimal photocatalytic performance achieved at a pH value of 9.0. The study reveals the importance of solution pH in the degradation process and the potential applicability of the composite for efficient magnetic separation and recycling in photocatalytic processes. The Fe3O4/Bi2MoO6/g-C3N4 magnetic composite photocatalyst demonstrated exceptional stability and recyclability, maintaining a high degradation efficiency of over 87% after five consecutive cycles. An XRD analysis conducted after the cycling tests confirmed that the composite's composition and chemical structure remained unchanged, further supporting its chemical stability. This investigation offers valuable insights into the photocatalytic degradation of sulfonamide antibiotics using magnetic composite photocatalysts and highlights the potential of the Fe3O4/Bi2MoO6/g-C3N4 composite for practical applications in environmental remediation.

engineering, chemical
Novel MIL-53(Fe)/ZnO nanocomposite mediated by persulfate in photocatalytic degradation of sulfamethazine under visible light

Hani Mahanna,Asmaa Fawzy,Mohamed Mossad

DOI: https://doi.org/10.4491/eer.2023.458

2023-11-18

Environmental Engineering Research

Abstract:This work aims to address some significant restrictions on the use of photocatalysis, including high e-/h+ recombination rate, and semiconductors with wide-band energy resulting in limited visible-light harvesting. Herein, we apply a novel hierarchical MIL-53(Fe)/ZnO nanocomposite for the degradation of sulfamethazine in the presence of persulfate under visible light irradiation. The ultrafine nanocomposite MIL-53(Fe)/ZnO was obtained by synthesizing Zn-free MIL-53Fe and employing it as a reactive template under a hydrothermal process. A set of experiments with a Box Behnken design was conducted to optimize the operating parameters by response surface method (RSM). Complete degradation of 10 mg/L of SMZ was attained after 30 min under the optimum operational conditions (catalyst dose = 0.2 g/L, pH = 3, and persulfate loading = 0.39 g/L). The SMZ degradation followed the Langmuir-Hinshelwood model. In addition, about 78% TOC removal was observed under the optimum conditions. Also, it was proven that MIL-53(Fe)/ZnO had high photostability after being reused for five successive cycles. A possible degradation pathway of SMZ was proposed based on the detection results of intermediates by LC-MS/MS, suggesting that the cleavage of the S-N bond and subsequent removal of sulfone moiety was the primary degradation pathway.

environmental sciences,engineering, environmental
Photo-Fenton degradation of tetracycline antibiotic over MIL-101(Cr)/FeOOH nanocomposite as stable and efficient visible light responsive photocatalyst

Mahdiyeh -Sadat Hosseini,Alireza Abbasi,Majid Masteri-Farahani

DOI: https://doi.org/10.1007/s11356-023-29812-y

IF: 5.8

2023-10-12

Environmental Science and Pollution Research

Abstract:Designing an inexpensive, easily synthesized, stable and efficient photocatalyst is a major challenge in photocatalysis area, especially when photo-reaction is performed in aquatic medium to degrade organic pollutants. To this aim, nano-sized MIL-101(Cr) (MIL = Materials Institute Lavoisier), as chemically tolerant metal–organic framework (MOF), was simply prepared via HF-free hydrothermal synthesis procedure. In order to decorate amorphous FeOOH quantum dots (QDs) on the surface of this MOF, various amounts of FeOOH QDs (i.e., 5, 10, 15 and 20 wt%) were synthesized in the presence of MIL-101(Cr) to prepare MIL-101(Cr)/FeOOH(x%) nanocomposites. Decoration of such iron oxide quantum dots on the surface of MIL-101(Cr) and investigation of its activity in photo-Fenton degradation of tetracycline (TC) antibiotic is reported here for the first time. Among the synthesized nanocomposites, MIL-101(Cr)/FeOOH(15%) demonstrated superior photo-Fenton activity in degradation of TC (80%) at short reaction time under optimum reaction condition using the energy-efficient white LED lamps as visible light source. It was observed that the synergy between any component of this photo-Fenton system such as nanocomposite, hydrogen peroxide and visible light is the main reason for enhancement of TC removal over time. Also, neither MIL-101(Cr) nor FeOOH QDs exhibited poor degradation efficiency, which implies the positive role of the coupling of these materials. Furthermore, the stability and recoverability of MIL-101(Cr)/FeOOH(15%) nanocomposite was investigated in four photo-Fenton cycles, which no significant decrease in TC degradation performance was observed.

environmental sciences
Visible Light Degradation of Naproxen by Enhanced Photocatalytic Activity of NiO and NiS, Scavenger Study and Focus on Catalyst Support and Magnetization

Firoozeh Torki,Hossein Faghihian

DOI: https://doi.org/10.1111/php.12906

2018-04-18

Photochemistry and Photobiology

Abstract:This research was aimed to prepare a magnetically photocatalyst enabling to degrade pharmaceutical wastewater and detoxification of pollutant such as naproxen, by visible light irradiation. The nano-sized NiS and NiO photocatalysts exhibit higher reactivity than their microsized counterparts, but separation of the used photocatalyst from the degradation solution is hard and imperfect. To remove this difficulty, magnetic polypyrrole core-shell (Fe3 O4 @PPY) was synthesized and employed as catalyst support. The magnetization property of the synthesized photocatalysts measured by VSM technique indicated that the photocatalysts were sufficiently magnetized to be readily separated from degradation solution by use of external magnetic field. The DRS study showed that the band gap of the photocatalysts shifted to lower energy after immobilization on the support materials leading to higher degradation efficiency. The optimal efficiency was obtained with the catalysts loaded with 50% of NiO and 50% of NiS. The augmenting effect of H2 O2 and the inhibition influence of some organic and inorganic compounds on the degradation process were studied. Regeneration of the used photocatalyst was performed by heat treatment, and the catalyst treated at 400°C retained most of its initial capacity. The degradation capacity was kinetically fast, and the equilibrium was attained within 30 min.

biochemistry & molecular biology,biophysics
Suppurative thrombophlebitis in childhood.

N. Sears,J. Grosfeld,T. Weber,M. Kleiman

DOI: https://doi.org/10.1542/peds.68.5.630

1981-11-01

PEDIATRICS

Abstract:Thrombophlebitis in children is almost always related to intravenous therapy. In most cases the inflammatory reaction is self-limited and resolves when the intravenous catheter or needle is removed. In some cases contamination may result in suppurative thrombophlebitis, a potentially life-threatening complication of intravenous therapy. This report describes two-6-year-old children with suppurative thrombophlebitis that was successfully treated by drainage of periphlebitic abscess and excision of the infected vein. Early recognition and prompt surgical management should reduce morbidity and prevent mortality in these cases.
Fabrication of Fe3O4/Al2O3/CuO magnetic nanocomposite and effective in the photedegradation of methylene blue

Sheida Makaremi,Ali Hossein Kianfar,Mohammad Amin Arayesh

DOI: https://doi.org/10.1007/s13738-024-03027-5

2024-05-19

Journal of the Iranian Chemical Society

Abstract:In this research, a Fe 3 O 4 /Al 2 O 3 /CuO magnetic nanocomposite (NC) was prepared by co-precipitation method for photocatalytic activity and identified using VSM, TEM, FE-SEM, EDX, XRD and DRS techniques. Based on the TEM analysis, the structure of NC was observed as nanorods. Also, the presence of CuO was confirmed by EDX and XRD analyses. Using the DRS spectrum results, the energy band gap of Fe 3 O 4 /Al 2 O 3 /CuO NC was determined as ~ 2 eV. The synthesized compound was used as a photocatalyst for the degradation of methylene blue under sunlight irradiation. The reaction process was investigated by ultraviolet–visible spectroscopy. According to the obtained results from MB degradation about 95 percent of MB (10 mg/L) was decomposed after 25 min under sunlight irradiation. Furthermore, even after five cycles, the rate of MB degradation could still exceed 90 percent. Also, based on the obtained results, the synthesized NC can be recovered and reused in the photochemistry process. Additionally, based on the results, the Fe 3 O 4 /Al 2 O 3 /CuO NCs show high performance photocatalytic activity toward the degradation of MB under solar radiation.

chemistry, multidisciplinary
Sonochemical Synthesis and Characterization of Magnetic Separable Fe3o4-Tio2 Nanocomposites and Their Catalytic Properties

Wanquan Jiang,Xueping Zhang,Xinglong Gong,Fangfang Yan,Zhong Zhang

DOI: https://doi.org/10.1080/19475411.2010.528873

2010-01-01

International Journal of Smart and Nano Materials

Abstract:A novel sonochemical method is described for the preparation of Fe3O4-TiO2 photocatalysts in which nanocrystalline titanium dioxide particles are directly coated onto a magnetic core. The Fe3O4 nanoparticles were partially embedded in TiO2 agglomerates. TiO2 nanocrystallites were obtained by hydrolysis and condensation of titanium tetraisopropyl in the presence of ethanol and water under high-intensity ultrasound irradiation. This method is attractive since it eliminated the high-temperature heat treatment required in the conventional sol-gel method, which is important in transforming amorphous titanium dioxide into a photoactive crystalline phase. In comparison to other methods, the developed method is simple, mild, green and efficient. The magnetization hysteresis loop for Fe3O4-TiO2 nanocomposites indicates that the hybrid catalyst shows superparamagnetic characteristics at room temperature. Photocatalytic activity studies confirmed that the as-prepared nanocomposites have high photocatalytic ability toward the photodegradation of RhB solution. Furthermore, the photodecomposition rate decreases only slightly after six cycles of the photocatalysis experiment. Thus, these Fe3O4-TiO2 nanocomposites can be served as an effective and conveniently recyclable photocatalyst.
High Efficiency Removal Performance of Tetracycline by Magnetic CoFe2O4/NaBiO3 Photocatalytic Synergistic Persulfate Technology

Juanxiang Zhang,Shengnan Zhang,Xiuqi Bian,Yaoshan Yin,Weixiong Huang,Chong Liu,Xinqiang Liang,Fayong Li

DOI: https://doi.org/10.3390/molecules29174055

IF: 4.6

2024-08-28

Molecules

Abstract:The widespread environmental contamination resulting from the misuse of tetracycline antibiotics (TCs) has garnered significant attention and study by scholars. Photocatalytic technology is one of the environmentally friendly advanced oxidation processes (AOPs) that can effectively solve the problem of residue of TCs in the water environment. This study involved the synthesis of the heterogeneous magnetic photocatalytic material of CoFe2O4/NaBiO3 via the solvothermal method, and it was characterized using different characterization techniques. Then, the photocatalytic system under visible light (Vis) was coupled with peroxymonosulfate (PMS) to explore the performance and mechanism of degradation of tetracycline hydrochloride (TCH) in the wastewater. The characterization results revealed that CoFe2O4/NaBiO3 effectively alleviated the agglomeration phenomenon of CoFe2O4 particles, increased the specific surface area, effectively narrowed the band gap, expanded the visible light absorption spectrum, and inhibited recombination of photogenerated electron–hole pairs. In the Vis+CoFe2O4/NaBiO3+PMS system, CoFe2O4/NaBiO3 effectively activated PMS to produce hydroxyl radicals (·OH) and sulfate radicals (SO4−). Under the conditions of a TCH concentration of 10 mg/L−1, a catalyst concentration of 1 g/L−1 and a PMS concentration of 100 mg/L−1, the degradation efficiency of TCH reached 94% after 100 min illumination. The degradation of TCH was enhanced with the increase in the CoFe2O4/NaBiO3 and PMS dosage. The solution pH and organic matter had a significant impact on TCH degradation. Notably, the TCH degradation efficiency decreased inversely with increasing values of these parameters. The quenching experiments indicated that the free radicals contributing to the Vis+CoFe2O4/NaBiO3+PMS system were ·OH followed by SO4−, hole (h+), and the superoxide radical (O2−). The main mechanism of PMS was based on the cycle of Co3+ and Co2+, as well as Fe3+ and Fe2+. The cyclic tests and characterization by XRD and FT-IR revealed that CoFe2O4/NaBiO3 had good degradation stability. The experimental findings can serve as a reference for the complete removal of antibiotics from wastewater.

chemistry, multidisciplinary,biochemistry & molecular biology
Assessment of Some Characteristics of a Novel Photocatalyst Based on Hydrotalcite Mg‐Al‐Ag, Titanium Dioxide and Magnetic Iron Nanoparticles

My Tra Duong,Chinh Thuy Nguyen,Thang Xuan Dam,Hieu Dinh Vu,Hoang Thai

DOI: https://doi.org/10.1002/slct.202304053

2024-04-27

ChemistrySelect

Abstract:This study focuses on preparing a photocatalyst based on hydrotalcite Mg−Al, Fe3O4, silver and TiO2 nanoparticles using the co‐precipitation method. 3‐(trimethoxysilyl)propyl methacrylate silane acts as a coupling agent for binding components in the photocatalyst. The photocatalyst can degrade 97 % methylene blue under sunlight irradiation. It can be against E. coli and S. aureus and cause toxicity to HEK293 cells. The utilization of metals and metal oxides as photocatalysts is a common method for treating dye contamination. Titanium dioxide nanoparticles (TNPs) are well known for their effectiveness as a photocatalyst in ultraviolet regions, while the inclusion of silver nanoparticles (AgNPs) can improve the photocatalytic properties of the nanocomposite materials in visible light. However, the TNPs and AgNPs are difficult to collect for reuse in water treatment due to their limited dispersion. Henceforth, this work recommended a novel photocatalyst based on hydrotalcite Mg−Al, magnetic Fe3O4 nanoparticles (FNPs), AgNPs, and TNPs prepared using the co‐precipitation method. Additionally, organic silane was first time used as a coupling agent to combine the components together. Consequently, the obtained products were applied for the degradation of methylene blue (MB) under natural sunlight. The characteristics of the synthesized nanocomposites were determined using infrared spectroscopy, vibrating‐sample magnetometer, X‐ray diffraction, dynamic light scattering, and scanning electron microscopy methods. The degradability of MB under sunlight was investigated using ultraviolet‐visible method. Moreover, the antibacterial activity and cytotoxicity of these nanocomposites has been tested and discussed.

chemistry, multidisciplinary
Heterogeneous photo-Fenton degradation toward sulfonamide matrix over magnetic Fe3S4 derived from MIL-100(Fe)

Jing Hang,Xiao-Hong Yi,Chong-Chen Wang,Huifen Fu,Peng Wang,Yijiang Zhao

DOI: https://doi.org/10.1016/j.jhazmat.2021.127415

IF: 13.6

2022-02-01

Journal of Hazardous Materials

Abstract:Magnetic Fe3S4 was facilely derived from MIL-100(Fe) as the precursor and thioacetamide (TAA) as the sulfur source under hydrothermal condition. The as-prepared Fe3S4 was adopted as catalyst to promote the photo-Fenton process, in which sulfamethoxazole (SMX) was used as representative pollutant sample to test the oxidative degradation performance of Fe3S4. The results showed that Fe3S4 exhibited excellent photo-Fenton-like oxidation decomposition performances toward sulfamethoxazole (SMX) under both UV and visible light. A possible degradation mechanism over Fe3S4 in the photo-Fenton reaction is put forward based on quenching experiments and electron spin resonance (ESR). About 41% total organic carbon (TOC) removal efficiency of sulfamethoxazole (SMX) over the as-prepared Fe3S4 can be accomplished within 40 min. As well, different sulfonamide antibiotics (SAs) like sulfamethoxazole (SMX), sulfisoxazole (SIM) and sulfadiazine (SDZ) were selected to further investigate the oxidative degradation activity of Fe3S4 in this photo-Fenton-like reaction system, in which the possible degradation pathways of SMX, SIM and SDZ were put forward based on UHPLC-MS analysis. This work provided a new strategy to prepare magnetic Fe3S4 as catalyst for advanced oxidation process, which can be easily separated from the treated water samples to accomplish facile recovery and recyclability.

environmental sciences,engineering, environmental

ZnT8107-115/HLA-A2 dimers attenuate the severity of diabetes by inducing CD8+ T cell tolerance.

Integrated Fenton-like and photocatalytic system for metronidazole degradation in water using FeNi3/SiO2/CuS magnetic nanocomposite

Synthesis of Ag/CuS doped mineral magnetite nanocomposite with improved photocatalytic activity against tetracycline and diclofenac pollutants

Magnetic induced construction of core-shell architecture Fe3O4@TiO2-Co nanocomposites for effective photocatalytic degradation of tetracycline

Enhanced solar light-driven photocatalysis of norfloxacin using Fe-doped TiO2: RSM optimization, DFT simulations, and toxicity study

Synthesis and characterization of magnetic iron sulfide (Fe-S)/CuS nano composite as a novel recyclable catalyst in photocatalyst removal of tetracycline from aqueous solutions

Photocatalytic Degradation of Tetracycline by ZnO/γ-Fe2O3 Paramagnetic Nanocomposite Material

Development and application of multifunctional Fe3O4/SiO2/TiO2/Cu nanocomposites for sustainable water treatment

Facile construction of magnetic M-ZnO-Ni-RSA composite as a functional photocatalyst for tetracycline degradation: Performance and mechanism

Microwave-based preparation of γ-Fe2O3/SrTiO3 photocatalyst for efficient degradation of organic pollutants in water

Insight into photo-fenton catalytic degradation of tetracycline by environmental friendly nanocomposite 1T-2H hybrid phases MoS2/Fe3O4/g-C3N4

Investigating the Performance and Stability of Fe3O4/Bi2MoO6/g-C3N4 Magnetic Photocatalysts for the Photodegradation of Sulfonamide Antibiotics under Visible Light Irradiation

Novel MIL-53(Fe)/ZnO nanocomposite mediated by persulfate in photocatalytic degradation of sulfamethazine under visible light

Photo-Fenton degradation of tetracycline antibiotic over MIL-101(Cr)/FeOOH nanocomposite as stable and efficient visible light responsive photocatalyst

Visible Light Degradation of Naproxen by Enhanced Photocatalytic Activity of NiO and NiS, Scavenger Study and Focus on Catalyst Support and Magnetization

Suppurative thrombophlebitis in childhood.

Fabrication of Fe3O4/Al2O3/CuO magnetic nanocomposite and effective in the photedegradation of methylene blue

Sonochemical Synthesis and Characterization of Magnetic Separable Fe3o4-Tio2 Nanocomposites and Their Catalytic Properties

High Efficiency Removal Performance of Tetracycline by Magnetic CoFe2O4/NaBiO3 Photocatalytic Synergistic Persulfate Technology

Assessment of Some Characteristics of a Novel Photocatalyst Based on Hydrotalcite Mg‐Al‐Ag, Titanium Dioxide and Magnetic Iron Nanoparticles

Heterogeneous photo-Fenton degradation toward sulfonamide matrix over magnetic Fe3S4 derived from MIL-100(Fe)