Abstract:Dynamic substructuring (DS) methods encompass a range of techniques to decompose large structural systems into multiple coupled subsystems. This decomposition has the principle benefit of reducing computational time for dynamic simulation of the system. In this context, DS methods may form an essential component of hybrid simulation, wherein they can be used to couple physical and numerical substructures at reduced computational cost. Since most engineered systems are inherently nonlinear, particular potential lies in incorporating nonlinear methods in existing substructuring schemes which are largely linear methods. The most widely used and studied DS methods are classical linear techniques such as the Craig-Bampton (CB) method. However, as linear methods they naturally break down in the presence of nonlinearities. Recent advancements in substructuring have involved the development of enrichments to linear methods, which allow for some degree of nonlinearity to be captured. The use of mode shape derivatives has been shown to be able to capture geometrically non-linear effects as an extension to the CBmethod. Other candidates include the method of Finite Element Tearing and Interconnecting. In this work, a virtual hybrid simulation is presented in which a linear elastic vehicle frame supported on four nonlinear spring damper isolators is decomposed into separate domains. One domain consisting of the finite element model of the vehicle frame, which is reduced using the CB method. The second domain consists of the nonlinear isolators whose restoring forces are characterised by nonlinear spring and damper forces. Coupling between the models is carried out using a Lagrange multiplier method and time series simulations of the system are conducted and compared to the full global system with regards to simulation time and accuracy.

Real-time dynamic substructuring in a coupled oscillator–pendulum system

Nonlinear Dynamics of Discontinuous Uncertain Oscillators with Unilateral Constraints

Novel coupling Rosenbrock‐based algorithms for real‐time dynamic substructure testing

On Dynamic Substructuring of Systems with Localised Nonlinearities

On the computation of stable coupled state-space models for dynamic substructuring applications

Multi-stability in Doubochinski's Pendulum

Chaos and transient chaos in an experimental nonlinear pendulum

Synchronization structures in the chain of rotating pendulums

Real-time hybrid testing using iterative control for periodic oscillations

Complex Dynamical Behavior of Rigid-flexible Coupling Spring Pendulum

Chaos control and sensitivity analysis of a double pendulum arm excited by an RLC circuit based nonlinear shaker

Dynamics of a novel 2-DOF coupled oscillators with geometry nonlinearity

An approximate technique to test chaotic region in a rotating pendulum system with bistable characteristics

Stability Analysis of Implicit Dynamic Substructure Experiment

Effect of Time-Varying Delay on Stability of Real-Time Hybrid Simulation with Multiple Experimental Substructures

Experimental chaotic synchronization for coupled double pendula

On -DOF active dampers to suppress multistability vibration of a -DOF rotor model subjected to simultaneous multiparametric and external harmonic excitations

Heterogeneous Time Integration Algorithm for Structural Dynamics with Localized Hysteretic Nonlinearities

On 1/2 -DOF Active Dampers to Suppress Multistability Vibration of a 2 -DOF Rotor Model Subjected to Simultaneous Multiparametric and External Harmonic Excitations

An Energy Analysis Of Nonlinear Oscillators With Time-Delayed Coupling