Abstract:Seeking a material with intrinsically low lattice thermal conductivity is crucial for screening high-performance thermoelectric (TE) materials. Here, the TE properties of SnSb2(Te1−xSex)4 (0 ≤ x ≤ 0.25) samples are systematically investigated for the first time. An intrinsically ultralow lattice thermal conductivity (0.56 W m−1 K−1 at 320 K and ∼0.46 W m−1 K−1 at 720 K) has been observed in SnSb2Te4, which can be ascribed to the weak chemical bonding as well as the bond anharmonicity verified by first-principles calculations. Furthermore, alloying with Se enables the remarkable increase in the Seebeck coefficients, resulting from the reduced carrier concentrations due to the enlarged formation energy of intrinsic SnSb-type antisite defects along with the simultaneous enhancement of density-of-states effective mass from the convergence of multiple carrier pockets. As a result, a peak zT value of 0.5 at 720 K and a significant improvement in average zT (∼200%) in SnSb2(Te0.75Se0.25)4 are achieved. This work not only demonstrates the potential of SnSb2Te4-based compounds for practical TE applications, but also provides an insightful guidance to improve TE performance by defect and electronic band engineering.

Investigation of thermoelectric properties in binary Sb-Te and Sn-Te alloys during crystallization process

Mid-temperature Thermoelectric Performance of Zone-Melted Sb2(Te,Se)3 Alloys Near Phase Transition Boundary

High thermoelectric performance in ZnSb-SnTe pseudo-binary materials

Enhanced thermoelectric perfromance in cubic form of SnSe stabilized through enformatingly alloying AgSbTe2

Enhanced mechanical and thermoelectric properties enabled by hierarchical structure in medium-temperature Sb2Te3 based alloys

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Cubic phase stabilization and thermoelectric performance optimization in AgBiSe2-SnTe system

Cubic phase stabilization and thermoelectric performance optimization in AgBiSe 2 –SnTe system

Phase compositions, nanoscale microstructures and thermoelectric properties in Ag2-ySbyTe1+y alloys with precipitated Sb2Te3 plates

Strong lattice anharmonicity securing intrinsically low lattice thermal conductivity and high performance thermoelectric SnSb2Te4 via Se alloying

High-Performance SnTe Thermoelectric Materials Enabled by the Synergy of Band Convergence and Phonon Scattering

Band convergence and nanostructure modulations lead to high thermoelectric performance in SnPb0.04Te-y% AgSbTe2

Thermoelectric Performance of Sb2Te3-Based Alloys is Improved by Introducing PN Junctions.

Nanocrystal-based thermoelectric SnTe-NaSbSe 2 alloys with strengthened band convergence and reduced thermal conductivity

Enhanced Thermoelectric Properties in the Counter-Doped SnTe System with Strained Endotaxial SrTe

Origin of improved average power factor and mechanical properties of SnTe with high-dose Bi2Te3 alloying

Realizing High Thermoelectric Performance in P-Type SnSe Through Crystal Structure Modification

Enhanced power factor of Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub> thin films via PbTe incorporating and annealing

Interstitial Defects Facilitate Dense Dislocations and Band Convergence for High Thermoelectric Performance in SnTe

High Thermoelectric Performance SnTe with a Segregated and Percolated Structure

Improved Thermoelectric Properties of AgSbTe2 Based Compounds with Nanoscale Ag2Te in Situ Precipitates