Abstract:Granulation is an important particle-size enlargement process, used in many industrial applications. Granulation within the pharmaceutical industry has, for many years, been performed through the adoption of a batch process. However, the technique of using a co-rotating twin screw granulator has been found to be very effective at granulating. The quality and manufacturing attributes of the granules produced vary depending upon a number of different machine and powder parameters. The focus of the work described within this paper has been on the crucial role that effective and accurate feeding of powders plays in the successful production of acceptable granules. This paper looks at both rigid frame and flexible frame LIW designs and also compares the performance across two scales of feeder from within the same commercially available product family. This work was performed using an active pharmaceutical ingredient (API) and this component was the major constituent of the formulation investigated. Consequently the physical properties of this API were the major contributing factors to the poor flow properties described within this paper. As a consequence of the physical properties of the pharmaceutical formulation under investigation, the rigid frame feeder, which used a fine pitch concave twin screw assembly to convey powders, was unable to accurately deliver the blended materials successfully. This was due to the blend bridging (or rat holing) within the powder hopper while under the influence of the bridge breaking scimitar blade. The material that was successfully delivered to the conveyance section of the feeder was then quickly over worked by the twin screws as a result of the feeder design. This resulted in the feeder motor shutting down as the upper control limit for motor power was exceeded. In contrast, the flexible frame LIW feeder only uses a single screw and has a spiral screw which is able to convey low bulk density powders more effectively. Additionally the flexible wall within the powder hopper is more effective at bridge breaking within the hopper should the powder consolidate. This resulted in efficient transfer of materials from bulk storage within the hopper to the single auger screw feeder which was connected upstream of the twin screw granulator.

An Evaluation of Wet Granulation Process Selection for API Prone to Polymorphic Form Conversion in the Presence of Moisture and Heat

Model-based analysis of high shear wet granulation from batch to continuous processes in pharmaceutical production--a critical review

Exploring the effect of raw material properties on continuous twin-screw wet granulation manufacturability

Determining the Impact of Roller Compaction Processing Conditions on Granulate and API Properties: Impact of Formulation API Load

An Advanced Twin-Screw Granulation Technology: The use of Non-Volatile Solvents with High Solubilizing Capacity

Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review

Studying the API Distribution of Controlled Release Formulations Produced via Continuous Twin-Screw Wet Granulation: Influence of Matrix Former, Filler and Process Parameters

Pharmaceutical Application of Process Understanding and Optimization Techniques: A Review on the Continuous Twin-Screw Wet Granulation

Impact of non-binder ingredients and molecular weight of polymer binders on heat assisted twin screw dry granulation

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Evaluation of water induced phase transition of Fexofenadine Hydrochloride during wet granulation process using NIR and DSC techniques

Granulation techniques and technologies: recent progresses

Elucidation of granulation mechanisms along the length of the barrel in continuous twin-screw melt granulation

Granulation Rheology I: Equipment Design and Preliminary Testing

A critical review on granulation of pharmaceuticals and excipients: Principle, analysis and typical applications

An Evaluation of Process Variables in wet Granulation

Spray granulation for drug formulation

Continuous Twin Screw Granulation: A Review of Recent Progress and Opportunities in Formulation and Equipment Design

An Overview on Polymorph Preparation Methods of Active Pharmaceutical Ingredients

Melt granulation using a twin-screw extruder: a case study

Twin screw wet granulation: Loss in weight feeding of a poorly flowing active pharmaceutical ingredient