Risk assessment method of polyethylene dust explosion based on explosion parameters

Lei Pang,Jiaojiao Cao,Ran Ma,Yu Zhao,Kai Yang
DOI: https://doi.org/10.1016/j.jlp.2021.104397
IF: 3.916
2021-03-01
Journal of Loss Prevention in the Process Industries
Abstract:<p>The explosion characteristic parameters of polyethylene dust were systematically investigated. The variations in the maximum explosion pressure (P<sub>max</sub>), explosion index (K<sub>st</sub>), minimum ignition energy (MIE), minimum ignition temperature (MIT), and minimum explosion concentration (MEC) of dust samples with different particle sizes were obtained. Using experimental data, a two-dimensional matrix analysis method was applied to classify the dust explosion severity based on P<sub>max</sub> and K<sub>st</sub>. Then, a three-dimensional matrix was used to categorize the dust explosion sensitivity based on three factors: MIE, MIT, and MEC. Finally, a two-dimensional matrix model of dust explosion risk assessment was established considering the severity and sensitivity. The model was used to evaluate the explosion risk of polyethylene dust samples with different particle sizes. It was found that the risk level of dust explosion increased with decreasing particle size, which was consistent with the actual results. The risk assessment method can provide a scientific basis for dust explosion prevention in the production of polyethylene.</p>
engineering, chemical
What problem does this paper attempt to address?