Abstract:The use of biomass-based combined heat and power (CHP) plants is considered by the EU administration to be an effective way to increase the use of renewables in the energy system, to reduce greenhouse gas emissions and to alleviate the dependency on imported fossil fuels. At present in Sweden, most of the CHP plants are operated in part-load mode because of variations in heat demand. Further use of the potential heat capacity from CHP plants is an opportunity for integration with other heat-demanding processes. Retrofitting the conventional CHP plants by integration with bioethanol and pellet production processes is considered a feasible and efficient way to improve the plants’ performances. Modeling and simulation of the CHP plant integrated with feedstock upgrading, bioethanol production and pellet production is performed to analyze the technical and economic feasibility. When integrating with bioethanol production, the exhaust flue gas from the CHP plant is used to dry the hydrolysis solid residues (HSR) instead of direct condensation in the flue gas condenser (FGC). This drying process not only increases the overall energy efficiency (OEE) of the CHP plant but also increases the power output relative to the system using only a FGC. Furthermore, if steam is extracted from the turbine of the CHP plant and if it is used to dry the HSR together with the exhaust flue gas, pellets can be produced and the bioethanol production costs can be reduced by 30% compared with ethanol cogeneration plants. Three optional pellet production processes integrated with an existing biomass-based CHP plant using different raw materials are studied to determine their annual performance. The option of pellet production integrated with the existing CHP plant using exhaust flue gas and superheated steam for drying allows for a low specific pellet production cost, short payback time and significant CO2 reduction. A common advantage of the three options is a dramatic increase in the total annual power production and a significant CO2 reduction, in spite of a decrease in power efficiency. The retrofitted biomass-based CHP plants play a crucial role in the present and future regional energy system. The total costs are minimized for the studied energy system by using wastes as energy sources. Analyses of scenarios for the coming decades are performed to describe how to achieve a regional fossil fuel-free energy system. It is possible to achieve the target by upgrading and retrofitting the present energy plants and constructing new ones. The conditions and obstacles have also been presented and discussed through optimizing the locations for proposed new energy plants and planting energy crops.

Design and Evaluation of Bio-Based Industrial Symbiosis System Producing Energy and Chemicals Using Regionally Available Crop Residue

Utilization of Rice Husk in the CO2-Recycling Gasification System for the Effective Implementation of Bioenergy with Carbon Capture and Storage (BECCS) Technology

Optimizing bioconversion processes of rice husk into value-added products: D-psicose, bioethanol, and lactic acid

Study on Biochar and Silicon Co-Production Technology of Rice Husk Based on the New Ammonia CO2 Capture Method and Its Comprehensive Benefits

Exergoeconomic evaluation of a new carbon-free hydrogen and freshwater production system based on biomass gasification process

Sustainable Biomethanol and Biomethane Production via Anaerobic Digestion, Oxy-Fuel Gas Turbine and Amine Scrubbing CO2 Capture

Study on biochar and silicon co-production technology of rice husk based on the new ammonia CO 2 capture method and its comprehensive benefits

Techno-Economic Analysis of an Integrated Biorefinery System for Poly-Generation of Power, Heat, Pellet and Bioethanol

Development of a paddy-based biorefinery approach toward improvement of biomass utilization for more bioproducts

Reduction in Environmental CO2 by Utilization of Optimized Energy Scheme for Power and Fresh Water Generations Based on Different Uses of Biomass Energy.

A Biomass-Integrated Comprehensive Energy System: Thermodynamics Assessment and Performance Comparison of Sugarcane Bagasse and Rice Husk As Input Source

Rice husk reuse as a sustainable energy alternative in Tolima, Colombia

Integrated biorefinery for bioethanol and succinic acid co-production from bread waste: Techno-economic feasibility and life cycle assessment

Insight mechanism of rice husk as renewable energy for bio-oil production

Harnessing biomass waste-to-energy for sustainable electricity generation: prospects, viability, and policy implications for low-carbon urban development

Integrated production of bioethanol and biomethane from rice waste using superior amylolytic recombinant yeast

Process Systems Engineering Approach for the Sustainable Design of Cyanobacteria-Based Integrated Biorefineries and Their Heat Exchanger Network

Improved Biohythane Production from Rice Straw in an Integrated Anaerobic Bioreactor under Thermophilic Conditions.

Techno-economic analysis of an integrated bioreﬁnerysystem for poly-generation of power, heat, pelletand bioethanol

Achieving near-zero emission and high-efficient combined cooling, heating and power based on biomass gasification coupled with SOFC hybrid system

Process design and techno-economic analysis of the coproduction of oil, electricity, and protein from plastics and biomass using an integrated system