Ascariasis in school children: epidemiological studies in Ethiopia.

S. Tedla,L. Jemaneh,M. Maru

1988-11-01

East African Medical Journal

Abstract:

What problem does this paper attempt to address?

In Situ Synthesis of Poly(Acrylic Acid) Physical Hydrogels from Silica Nanoparticles

Jun Yang,Xi-Ping Wang,Xu-Ming Xie

DOI: https://doi.org/10.1039/c1sm06647a

IF: 4.046

2012-01-01

Soft Matter

Abstract:This paper introduces a versatile method to synthesize physical hydrogels by silica nanoparticle (SN) surface in situ polymerization. A series of poly(acrylic acid) chains were covalently grafted from the SNs that were treated with γ-methacryloxypropyl trimethoxy silane. The entanglements among the grafted chains constructed the hydrogel networks and the SNs played the role of ‘analogous crosslinking points’. The SNs were encapsulated by the grafted polymer chains and formed a ‘core–shell’ structure. It was found that the molecular weight of the grafted chains and the content and diameter of the SNs affected the hydrogel’s properties. In comparison with chemically crosslinked hydrogels, the hybrid hydrogels exhibited excellent mechanical properties and could endure stress as high as 3.16 MPa and an elongation of 440% at a water content of 100 wt%. The gel–sol phenomenon confirmed that this hybrid hydrogel belonged to the physically crosslinked type.
[Early results of the use of a diet free of animal protein in therapy of phenylketonuria].

F. Lotti

1957-12-01

Abstract:
Dual cross-linked networks hydrogels with unique swelling behavior and high mechanical strength: Based on silica nanoparticle and hydrophobic association

Jun Yang,Fu-Kuan Shi,Cheng Gong,Xu-Ming Xie

DOI: https://doi.org/10.1016/j.jcis.2012.05.046

IF: 9.9

2012-09-01

Journal of Colloid and Interface Science

Abstract:A series of physically cross-linked hydrogels composed poly(acrylic acid) and octylphenol polyoxyethylene acrylate with high mechanical strength are reported here with dual cross-linked networks that formed by silica nanoparticles (SNs) and hydrophobic association micro-domains (HAMDs). Acrylic acid (AA) and octylphenol polyoxyethylene acrylate with 10 ethoxyl units (OP-10-AC) as basic monomers in situ graft from the SNs surface to build poly(acrylic acid) hydrophilic backbone chains with randomly distributed OP-10-AC hydrophobic side chains. The entanglements among grafted backbone polymer chains and hydrophobic branch architecture lead to the SNs and HAMDs play the role of physical cross-links for the hydrogels network structure. The rheological behavior and polymer concentration for gelation process are measured to examine the critical gelation conditions. The correlation of the polymer dual cross-linked networks with hydrogels swelling behavior, gel-to-sol phase transition, and mechanical strength are addressed, and the results imply that the unique dual cross-linking networks contribute the hydrogels distinctive swelling behavior and excellent tensile strength. The effects of SNs content, molecular weight of polymer backbone, and temperature on hydrogels properties are studied, and the results indicate that the physical hydrogel network integrity is depended on the SNs and HAMDs concentration.

chemistry, physical
Thermosensitive hybrid hydrogels with silica nanoparticle-cross-linked polymer networks

Ashraful Alam,Makoto Takafuji,Hirotaka Ihara,Md. Ashraful Alam

DOI: https://doi.org/10.1016/j.jcis.2013.04.054

IF: 9.9

2013-09-01

Journal of Colloid and Interface Science

Abstract:A simple methodology for the preparation of thermosensitive organic-inorganic hybrid hydrogels using silica nanoparticle-mediated polymer networks is described. A thermosensitive copolymer poly[N-isopropylacrylamide-co-(3-methacryloxypropyltrimethoxysilane)], (pNS), with reactive side chains (Si-O-CH3) was first synthesized by free radical polymerization using N-isopropylacrylamide (NIPAAm) and 3-methacryloxypropyltrimethoxysilane (MAPTS). Then, simple mixing of the aqueous solution of this copolymer with silica nanoparticle (SiP) suspensions at room temperature led to the formation of thermosensitive hybrid hydrogels cross-linked with silica nanoparticles (SiP) which did not require any other processing like washing for the removal of unreacted monomers and initiators. The effects of SiP content on gelation abilities, temperature-responsive behaviors, swelling and deswelling kinetics, and mechanical properties of the hydrogels were investigated. The results showed that transparent hybrid hydrogels with adjustable network structures were obtained within a few minutes to a couple of hours depending on the concentration of the copolymers and the silica nanoparticles. The hybrid hydrogels exhibited a lower critical solution temperature (LCST) of around 33 °C with no significant deviation from conventional poly(N-isopropylacrylamide) hydrogels; the LCST was not significantly affected by the concentration of silica nanoparticles (which in these systems serve as the cross-linkers). In addition, the hydrogels showed significantly large equilibrium swelling ratios, improved mechanical strength, and suitable deswelling behavior, which can easily be tuned by varying the composition of the hybrid hydrogels.

chemistry, physical
Photopolymerizable Thiol-Acrylate Maleiated Hyaluronic Acid/thiol-Terminated Poly(ethylene Glycol) Hydrogels As Potential In-Situ Formable Scaffolds.

Can Zhang,Qi Dong,Kaili Liang,Ding Zhou,Hongjun Yang,Xin Liu,Weilin Xu,Yingshan Zhou,Pu Xiao

DOI: https://doi.org/10.1016/j.ijbiomac.2018.07.153

IF: 8.2

2018-01-01

International Journal of Biological Macromolecules

Abstract:Despite their potential in various biomedical applications, photocrosslinkable hyaluronate hydrogels have often been limited by weak formation and unsatisfied mechanical strength which can be attributed to insufficient substitution of photoactive groups on the hyaluronate backbone and the oxygen inhibition effect. In this study, a new approach for the production of hyaluronic acid (MHA) with high acrylate group substitution (i.e. 2.27) is developed. It is based on the reaction of sodium hyaluronate and maleic anhydride in dimethyl sulfoxide, which has never been reported previously. Furthermore, the thiol-acrylate photopolymerization approach is employed to prepare maleiated hyaluronic acid/thiol-terminated poly(ethylene glycol) (MHA/TPEG) hydrogels which can overcome the oxygen inhibition effect. And the hydrogels possess porous structures, high swelling ratio, and tunable degradation rate. Specifically, the hydrogels could gel quickly within 15 s and demonstrate improved stiff (G' = 4100 Pa). The in vitro cytotoxic evaluation demonstrates that the hydrogels are cytocompatible to L929 cells. As a result, the in-situ formable hydrogel scaffolds exhibit great potential for medical applications. (C) 2018 Elsevier B.V. All rights reserved.
Crosslinked hyaluronic acid hydrogels: a strategy to functionalize and pattern

Tatiana Segura,Brian C Anderson,Peter H Chung,Rebecca E Webber,Kenneth R Shull,Lonnie D Shea

DOI: https://doi.org/10.1016/j.biomaterials.2004.02.067

IF: 14

2005-02-01

Biomaterials

Abstract:The physiological activity of hyaluronic acid (HA) polymers and oligomers makes it a promising material for a variety of applications. The development of HA-hydrogel scaffolds with improved mechanical stability against degradation and biochemical functionality may enhance their application to tissue engineering. In this report, a crosslinking strategy targeting the alcohol groups via a poly(ethylene glycol) diepoxide crosslinker was investigated for the generation of degradable HA hydrogels. To provide support for cell adhesion in vitro, collagen was incorporated into the HA solution prior to the crosslinking process. The hydrogels have a continuous exterior and a porous interior, with pore diameters ranging from 6 to 9 microm. HA and HA-collagen hydrogels degrade in the presence of hyaluronidase and collagenase enzymes, indicating that the chemical modification does not prevent biodegradation. Complete degradation of the hydrogels occurred within 14 days in hyaluronidase (100 U/ml) and 3 days in collagenase (66 U/ml). Pattern transfer was employed to introduce a surface topography onto the hydrogel, which was able to orient cell growth. Furthermore, the hydrogels could be functionalized with the biomolecule neutravidin by incorporation of biotin along the HA backbone. This biotinylation approach may allow attachment of bioactive molecules that are conjugated to avidin.

engineering, biomedical,materials science, biomaterials
Optimized Preparation of Thiolated Hyaluronic Acid Hydrogel with Controllable Degree of Substitution

Yanyan Xiao,Wanzhong Zhang,Xiumei Wang,Shenglian Yao,Fengyi Guan

DOI: https://doi.org/10.1166/jbt.2014.1168

2014-01-01

Journal of Biomaterials and Tissue Engineering

Abstract:Thiolated hyaluronic acid (HA) derivatives have been widely studied for their promising applications in tissue engineering and regenerative medicine because of their unique in situ gelation performance, improved degradation behavior, facile bioactive modification, and so on so forth. In this study, the direct thiolated process of hyaluronic acid was improved by optimizing the activities of activating agents of carbodiimide (EDC) and 1-hydroxybenzotriazole (HOBt) and adjusting the amount of reactants to control the degrees of thiol substitution ranging from 7% to 74%. Thiolated HA (HA-SH) would undergo gelation through partial oxidation of thiol groups in air to disulfides with different mechanical properties corresponding to diverse degree of substitution. Further oxidation using H2O2 facilitated the formation of much firmer hydrogel with high rheological properties and long-term bio-stability in simulated body fluid (SBF).
Synthesis of hyaluronic acid hydrogels by crosslinking the mixture of high-molecular-weight hyaluronic acid and low-molecular-weight hyaluronic acid with 1,4-butanediol diglycidyl ether

Yu Xue,Hongyue Chen,Chao Xu,Dinghua Yu,Huajin Xu,Yi Hu

DOI: https://doi.org/10.1039/c9ra09271d

IF: 4.036

2020-01-01

RSC Advances

Abstract:High molecular weight hyaluronic acid (HMW-HA) and low molecular weight hyaluronic acid (LMW-HA) were mixed at different ratios and cross-linked with 1,4-butanediol diglycidyl ether (BDDE) to prepare five hyaluronic acid hydrogels A–E.

chemistry, multidisciplinary
An innovative approach to use zeolite as crosslinker for synthesis of p(HEMA-co-NIPAM) hydrogel

Seçil Durmuş,Betül Yılmaz,Alper Onder,Pinar Ilgin,Hava Ozay,Ozgur Ozay

DOI: https://doi.org/10.1007/s00706-022-02908-w

2022-03-22

Abstract:This study introduced a modified method to synthesize organic–inorganic hybrid crosslinker based on zeolite. First, zeolite nanoparticles were modified with 3-(aminopropyl)trimethoxysilane. Then, the amine-functionalized zeolite has been reacted with the glycidyl methacrylate via an epoxide ring-opening mechanism. The vinyl-functionalized zeolite was applied as a crosslinking agent to form hydrogel network. A novel temperature-sensitive nanocomposite hydrogel was prepared by crosslinking N-isopropylacrylamide as a comonomer and 2-hydroxyethyl methacrylate as a monomer with free-radical polymerization. Results showed that p(2-hydroxyethyl methacrylate-co–N-isopropylacrylamide)/vinyl-functionalized zeolite nanocomposite hydrogel has a chemically crosslinked and porous network structure. The content of crosslinker and monomers had obvious effects on the swelling ratio of the nanocomposite hydrogel. The temperature and salt-sensitive behavior of the hydrogels are also discussed. We offer a multifunctional crosslinker for preparing sensitive materials that can serve biomedical or environmental applications.
Double networks hybrid hydrogels of silica nanoparticles/polyacrylamide: Network stiffness, viscoelastic, mechanical and adhesion properties

Camellia Zareie,Azadeh Seifi,Ahmad Reza Bahramian

DOI: https://doi.org/10.1080/01932691.2024.2342434

2024-04-19

Journal of Dispersion Science and Technology

Abstract:Today, the challenge of enhancing the strength and adhesion of the polyacrylamide hydrogel network is still a major concern in many applications. This study investigates the effect of silica nanoparticle concentration on the cross-linked polyacrylamide hydrogel's gelation, viscoelastic, structural, and adhesion properties. The hybrid hydrogels were evaluated using DSC, XRD, SEM, and rheological analysis to determine their enthalpy of cross-linking, crystallinity, morphology, and elastic properties. The results of kinetic analysis confirmed the catalytic effect of silica nanoparticles on the gelation kinetics. A deviation from the elastic behavior of the unfilled hydrogel was found from the rheological studies. Using the Weibull Model to describe the creep test results showed a significant increase in retardation time with increasing silica nanoparticles content up to the percolation threshold of 0.24 wt.%. This confirmed the development of a more viscous behavior due to the formation of a physical network of nano-silica particles. Based on the DSC energy of hydrogels, both chemical and physical tie points (approximately 19 covalent crosslinking points) were calculated. The hydrogel containing 9 wt.% of silica nanoparticles demonstrated significant improvement in density, and adhesion to the metal surface by about 100% and 350%, respectively. As a result of this study, the hydrogel containing 9 wt% of silica nanoparticles (H 9 ) is suggested for various field studies, such as oil well plugging industries.

chemistry, physical
Mild preparation of hyaluronic acid/silk fibroin sponges by modified crosslinking method

Yanfei Feng,Longxing Niu,Zixin Gao,Lin Zhu,Mingzhong Li,Qiang Zhang,Renchuan You

DOI: https://doi.org/10.1016/j.ijbiomac.2024.132805

IF: 8.2

2024-06-02

International Journal of Biological Macromolecules

Abstract:The composites composed of hyaluronic acid (HA) and silk fibroin (SF) exhibit great potential in diverse biomedical applications. However, the utilization of commercial crosslinkers such as 1,4-butanediol diglycidyl ether (BDDE) for crosslinking HA typically necessitates harsh conditions involving strong alkaline, which greatly limits its potential applications. In this study, a mild modified approach was developed to fabricate HA/SF blend sponges crosslinked by BDDE without alkaline conditions. The blend solutions were cryo-concentrated to induce crosslinking reactions. The mechanism of freezing crosslinking was elucidated by investigating the effects of ice crystal growth and HA molecular weight on the degree of crosslinking. The results revealed that HA achieved efficient crosslinking when its molecular weight exceeds 1000 kDa and freezing temperatures ranged from −40 °C to −20 °C. After introducing SF, multiple crosslinks were formed between SF and HA, producing water-stable porous sponges. The SEM results demonstrated that the introduction of SF effectively enhanced the interconnectivity between macropores through creating subordinate holes onto the pores wall. Raising the SF content significantly enhanced compression strength, resistance to enzymatic degradation and cell viability of blend sponges. This study provides a novel strategy for designing bioactive HA/SF blend sponges as substitutes for tissue repair and wound dressing.

polymer science,biochemistry & molecular biology,chemistry, applied
Hybrid Acrylated Chitosan and Thiolated Pectin Cross-Linked Hydrogels with Tunable Properties

Shaked Eliyahu,Alexandra Galitsky,Esther Ritov,Havazelet Bianco-Peled

DOI: https://doi.org/10.3390/polym13020266

IF: 5

2021-01-14

Polymers

Abstract:We developed and characterized a new hydrogel system based on the physical and chemical interactions of pectin partially modified with thiol groups and chitosan modified with acrylate end groups. Gelation occurred at high pectin thiol ratios, indicating that a low acrylated chitosan concentration in the hydrogel had a profound effect on the cross-linking. Turbidity, Fourier transform infrared spectroscopy, and free thiol determination analyses were performed to determine the relationships of the different bonds inside the gel. At low pH values below the pKa of chitosan, more electrostatic interactions were formed between opposite charges, but at high pH values, the Michael-type addition reaction between acrylate and thiol took place, creating harder hydrogels. Swelling experiments and Young’s modulus measurements were performed to study the structure and properties of the resultant hydrogels. The nanostructure was examined using small-angle X-ray scattering. The texture profile analysis showed a unique property of hydrogel adhesiveness. By implementing changes in the preparation procedure, we controlled the hydrogel properties. This hybrid hydrogel system can be a good candidate for a wide range of biomedical applications, such as a mucosal biomimetic surface for mucoadhesive testing.

polymer science
Synergistic influence of tetraethyl orthosilicate crosslinker on mixed matrix hydrogels

Sadia Sagar,Abdulaziz Alturki,Muhammad Farhan,Ali Bahadar,Nazia Hossain

DOI: https://doi.org/10.1007/s13204-022-02606-3

2022-08-30

Applied Nanoscience

Abstract:Abstract Hydrogel is a 3D framework of hydrophilic polymeric material that quickly absorbs and retains a huge amount of water (or other fluid) and offers versatile functionality. A series of unique carboxymethyl cellulose/Xanthan gum/polyvinyl alcohol (CXP) blended hydrogels, containing both the natural and synthetic polymers, were prepared by following the blending and casting approach. The polymers were incorporated through chemical crosslinking by tetraethyl orthosilicate (TEOS). The fabricated hydrogels showed all required features: non-toxicity, biocompatibility, and improved mechanical strength. The addition and variation in TEOS (crosslinker) significantly impacted the key characteristics of CXP hydrogel. The scanning electron microscopy (SEM) images showed the porous structure and indicated that the pore's size and intensity were reduced with the surge in TEOS content. Fourier transform infrared spectroscopy (FTIR) results confirmed the successful incorporation of various polymeric strands through crosslinking by TEOS. The thermogravimetric analysis (TGA) highlighted the greater stability of all the hydrogels over high temperatures. The crosslinked hydrogel displayed higher thermal resilience than the uncross-linked one. The differential thermal analysis (DTA) also confirmed that the addition of TEOS content drastically enhanced the thermal endurance of crosslinked hydrogels in comparison with the neat hydrogel. All the specimens exhibited good swelling ability in distilled water during the swelling studies. This study also reflected that the addition of crosslinker in a limited amount (50 μL) has significantly enhanced the swelling but further increase in concentration hindered the water uptake. The swelling response of blends towards pH revealed low swelling of films in acidic and basic pH, but maximal swelling in neutral media. This unique pH response of hydrogels at neutral pH along with the biocompatibility made them suitable for injectable managed drug carrier.

nanoscience & nanotechnology
Strengthening Network of Polyacrylic Acid/Silica Nanocomposite Hydrogels

Zilu Liu,Juan Du,Yun Tan,Liqin Cao,Shimei Xu,Jianbin Huang

DOI: https://doi.org/10.1002/pc.24440

IF: 5.2

2018-01-01

Polymer Composites

Abstract:The polyacrylic acid (PAA)/silica nanocomposite hydrogels with high mechanical property were prepared by combining sol-gel process and in situ free radical polymerization using 3-methacryloxypropyltrimethoxysilane (MPTMS) as silane and acrylic acid (AA) as monomers. The structure-property relationship of nanocomposite hydrogels was characterized by FT-IR, DMA, TGA, XRD, TEM, and static mechanical testing. The dependence of mechanical property on the network parameter was investigated. The elastic modulus and compression fracture stress of PAA/silica nanocomposite hydrogels reached 1.27 and 1.35 MPa at molar ratio of MPTMS to AA of 0.034. The enhancement of mechanical property was attributed to the multiple cross-linking networks between MPTMS and AA by covalent bonding and hydrogen bonding. POLYM. COMPOS., 39:3969-3976, 2018. (c) 2017 Society of Plastics Engineers
Reversibly Cross-Linking Amino-Polysiloxanes by Simple Triatomic Molecules. Facile Methods for Tuning Thermal, Rheological, and Adhesive Properties

Tao Yu,Koji Wakuda,Daniel L. Blair,Richard G. Weiss

DOI: https://doi.org/10.1021/jp900115g

2009-01-01

Abstract:The physical properties of five siloxane polymers with different types and frequencies of amino functional groups along the polymer side chains have been manipulated from flowing liquids to gels and to rubber-like materials by the simple addition or subtraction of a neutral triatomic molecule, CO2 or CS2, at room temperature. The chemical changes, formation of ammonium carbamates and ammonium dithiocarbamates, create materials whose properties are totally different from those of the parent polymers as a result of the introduction of ionic cross-links. These materials can be returned to their original forms by heating (in the case of the CO2 adducts) or to their protonated original forms by treatment with an acid (in the case of the CO2 and CS2 adducts). Heating the ammonium dithiocarbamates leads to loss of H2S and permanent (covalent) thiourea cross-links between the polymer chains. The new materials adhere strongly to other surfaces and can be swelled to several times their original volumes by different liquids. The rheological, swelling, and physical properties of the new materials have been correlated with the structures of the original polymers to provide a comprehensive picture of how changes at the nanometric length scale are translated to macroscopic changes. At least for the polysiloxanes examined here, the properties of the adducts do not correlate with the molecular weights of the original polymers, but do with the frequency of amino groups. The results demonstrate a simple, new method to cross-link polysiloxanes (and, in principle, a wide range of other polymers), transforming them into materials with totally different and potentially commercially useful properties.
Hydrolytically Degradable Hyaluronic Acid Hydrogels with Controlled Temporal Structures

Sujata Sahoo,Cindy Chung,Sudhir Khetan,Jason A. Burdick

DOI: https://doi.org/10.1021/bm800051m

2008-03-07

Biomacromolecules

Abstract:Polysaccharides are being processed into biomaterials for numerous biological applications due to their native source in numerous tissues and biological functions. For instance, hyaluronic acid (HA) is found abundantly in the body, interacts with cells through surface receptors, and can regulate cellular behavior (e.g., proliferation, migration). HA was previously modified with reactive groups to form hydrogels that are degraded by hyaluronidases, either added exogenously or produced by cells. However, these hydrogels may be inhibitory and their applications are limited if the appropriate enzymes are not present. Here, for the first time, we synthesized HA macromers and hydrogels that are both hydrolytically (via ester group hydrolysis) and enzymatically degradable. The hydrogel degradation and growth factor release was tailored through the hydrogel cross-linking density (i.e., macromer concentration) and copolymerization with purely enzymatically degradable macromers. When mesenchymal stem cells (MSCs) were encapsulated in the hydrogels, cellular organization and tissue distribution was influenced by the copolymer concentration. Importantly, the distribution of released extracellular matrix molecules (e.g., chondroitin sulfate) was improved with increasing amounts of the hydrolytically degradable component. Overall, this new macromer allows for enhanced control over the structural evolution of the HA hydrogels toward applications as biomaterials.

polymer science,biochemistry & molecular biology,chemistry, organic
Hyaluronic Acid Based Hydrogels for Regenerative Medicine Applications

Assunta Borzacchiello,Luisa Russo,Birgitte M. Malle,Khadija Schwach-Abdellaoui,Luigi Ambrosio

DOI: https://doi.org/10.1155/2015/871218

2015-01-01

BioMed Research International

Abstract:Hyaluronic acid (HA) hydrogels, obtained by cross-linking HA molecules with divinyl sulfone (DVS) based on a simple, reproducible, and safe process that does not employ any organic solvents, were developed. Owing to an innovative preparation method the resulting homogeneous hydrogels do not contain any detectable residual cross-linking agent and are easier to inject through a fine needle. HA hydrogels were characterized in terms of degradation and biological properties, viscoelasticity, injectability, and network structural parameters. They exhibit a rheological behaviour typical of strong gels and show improved viscoelastic properties by increasing HA concentration and decreasing HA/DVS weight ratio. Furthermore, it was demonstrated that processes such as sterilization and extrusion through clinical needles do not imply significant alteration of viscoelastic properties. Both SANS and rheological tests indicated that the cross-links appear to compact the network, resulting in a reduction of the mesh size by increasing the cross-linker amount. In vitro degradation tests of the HA hydrogels demonstrated that these new hydrogels show a good stability against enzymatic degradation, which increases by increasing HA concentration and decreasing HA/DVS weight ratio. Finally, the hydrogels show a good biocompatibility confirmed by in vitro tests.

biotechnology & applied microbiology,medicine, research & experimental
Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

GD Chen,SX Zhou,GX Gu,LM Wu

DOI: https://doi.org/10.1002/macp.200400478

IF: 2.996

2005-01-01

Macromolecular Chemistry and Physics

Abstract:Silica sols were first prepared based on different ratios of tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) by an acid-catalyzed sol-gel process, and then incorporated into acrylic-based polyurethanes. The structures and morphologies of silicone-oxo clusters were studied by Si-29 NMR, SAXS, and scanning electron microscopy (SEM), whereas the mechanical properties of polyurethane/silica hybrids were characterized by DMA and tensile tests. The silicone-oxo clusters in both silica sol and polyurethane hybrids became denser and larger at a higher molar ratio of TEOS/MTES and higher silica content, and the silica-oxo clusters of polyurethane/silica hybrids even became more compact and larger than those of silica sols, increasing the elastic modulus and tensile strength of polyurethane/silica hybrids.
A dual-cross-linked hydrogel based on hyaluronic acid/gelatin tethered via tannic acid: mechanical properties’ enhancement and stability control

Shan Yu,Yuxing Ji,Cuiping Guo,Daohuan Lu,Zhijie Geng,Dating Pei,Qunfeng Liu

DOI: https://doi.org/10.1007/s13726-020-00891-9

IF: 2.485

2021-01-23

Iranian Polymer Journal

Abstract:Extracellular matrix (ECM) as a network is mainly composed of glycosaminoglycans and proteins. Among these glycosaminoglycans and proteins that naturally occur in ECM, hyaluronic acid (HA) and gelatin attract more attentions. In this work, a chemically cross-linked HA/gelatin hydrogel (HG hydrogel) was firstly fabricated, and then, tannic acid (TA) was introduced as a physical cross-linker, to form a dual-cross-linked network (HG-TAx hydrogels). The strong hydrogen bonding between TA and HG hydrogel resulted in lower swelling ratio, decreasing from 220% (pristine HG hydrogels) to 7.5% (HG-TA25 hydrogels) and stronger mechanical properties increasing from 6 kPa (HG hydrogel) to 160 kPa (HG-TA25 hydrogel). The hydrogel stability in enzyme was significantly improved, attributing to the hyaluronidase inhibition activity of TA. The degradation time significantly increased along with the addition of TA (from 7 up to 21 days). Furthermore, the HG-TAx hydrogels exhibited good cleavage ability to reactive oxygen species (ROS) that could be generated in human tissues, and the antioxidant capacity increased up to 24.2 mg/mL of L-ascorbic acid standard. The improved mechanical properties, prolonged degradation time, and potential antioxidant ability of the HG-TAx hydrogels could pave the way for the design of biomaterials. Furthermore, TA has shown potential biological functions properties and brought the great potential of the HG-TAx hydrogels for implant applications.

polymer science
Branching and Cross-Linking of Siloxane Copolymers Containing Hydromethyl-Siloxane Units by the Hydride Transfer Restructuring Reaction. Possible Route to Silicone Coatings

U. Mizerska,S. Rubinsztajn,W. Fortuniak,J. Chojnowski,A. Walkiewicz-Pietrzykowska,P. Uznański

DOI: https://doi.org/10.1007/s10904-024-03011-9

IF: 3.518

2024-03-16

Journal of Inorganic and Organometallic Polymers and Materials

Abstract:The restructuring reactions of three siloxane copolymers: poly(Me 2 SiO-co-HMeSiO), poly(PhMeSiO-co-HMeSiO) and poly(3,3,3-F 3 PrMeSiO-co-HMeSiO) in the presence of B(C 6 F 5 ) 3 (TPFPB) were investigated. The studied restructuring reactions are the result of the hydride transfer process between two silicon atoms, which is mediated by TPFPB. B(C 6 F 5 ) 3 . Initially, the restructuring process produces high molecular weight, branched siloxane copolymers. These copolymers are soluble and capable of forming thin layers. Continuing this reaction leads to cross-linking of the siloxane polymer and the formation of an insoluble gel. The same restructuring process allows the resulting films to be converted into hard coatings after solvent evaporation. The restructuring process of siloxane copolymers was compared with the previously studied restructuring of polyhydromethylsiloxane homopolymer. Although the mechanism of branching and cross-linking is similar, diorganosiloxane units play an important role in the restructuring process as well as influence the properties of the obtained coatings.

polymer science

Ascariasis in school children: epidemiological studies in Ethiopia.

In Situ Synthesis of Poly(Acrylic Acid) Physical Hydrogels from Silica Nanoparticles

[Early results of the use of a diet free of animal protein in therapy of phenylketonuria].

Dual cross-linked networks hydrogels with unique swelling behavior and high mechanical strength: Based on silica nanoparticle and hydrophobic association

Thermosensitive hybrid hydrogels with silica nanoparticle-cross-linked polymer networks

Photopolymerizable Thiol-Acrylate Maleiated Hyaluronic Acid/thiol-Terminated Poly(ethylene Glycol) Hydrogels As Potential In-Situ Formable Scaffolds.

Crosslinked hyaluronic acid hydrogels: a strategy to functionalize and pattern

Optimized Preparation of Thiolated Hyaluronic Acid Hydrogel with Controllable Degree of Substitution

Synthesis of hyaluronic acid hydrogels by crosslinking the mixture of high-molecular-weight hyaluronic acid and low-molecular-weight hyaluronic acid with 1,4-butanediol diglycidyl ether

An innovative approach to use zeolite as crosslinker for synthesis of p(HEMA-co-NIPAM) hydrogel

Double networks hybrid hydrogels of silica nanoparticles/polyacrylamide: Network stiffness, viscoelastic, mechanical and adhesion properties

Mild preparation of hyaluronic acid/silk fibroin sponges by modified crosslinking method

Hybrid Acrylated Chitosan and Thiolated Pectin Cross-Linked Hydrogels with Tunable Properties

Synergistic influence of tetraethyl orthosilicate crosslinker on mixed matrix hydrogels

Strengthening Network of Polyacrylic Acid/Silica Nanocomposite Hydrogels

Reversibly Cross-Linking Amino-Polysiloxanes by Simple Triatomic Molecules. Facile Methods for Tuning Thermal, Rheological, and Adhesive Properties

Hydrolytically Degradable Hyaluronic Acid Hydrogels with Controlled Temporal Structures

Hyaluronic Acid Based Hydrogels for Regenerative Medicine Applications

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

A dual-cross-linked hydrogel based on hyaluronic acid/gelatin tethered via tannic acid: mechanical properties’ enhancement and stability control

Branching and Cross-Linking of Siloxane Copolymers Containing Hydromethyl-Siloxane Units by the Hydride Transfer Restructuring Reaction. Possible Route to Silicone Coatings